Search Results for "python serial"

Block that receives a " message" and send string values over serial connection, to control hardware devices ( switch ), for example, via Arduino based controller ( see https://sourceforge.net/projects/ardu-switch/ ) Prerequisite: pyserial Build as usual for a Gnuradio block: - download and unpack - cd gr-message_to serial - mkdir build && cd build - cmake .. && make - sudo make install && ldconfig If successful this block is into OOT section... Enjoy ;-)

...The setup button opens the configuration screen. The setup screen is used to configure the 12 buttons. The lower three buttons are for the user name, QRZ password, and to set the serial port. Press the save edit button to save changes. 73, Todd

This project aims to create an automatically tuned loop antenna for the shortwave bands. The implementation is based around an AVR microcontroller. The interface is controlled via a serial interface. The aim is to create an android app to control the antenna via a rs232 ttl to bluetooth converter.

Rigserve implements a human-readable control language for remote or local IP access to amateur radio equipment (rigs). A Python class library allows interfacing with a large number of rig types via serial ports or other methods.