Open Source Serial Software - Page 3

Java Serial Port Terminal allows you to open asynchronous serial COM ports on your computer. For all you Java fans out there, this is an example of how to access a serial port. Produced by BreezeElectronics.Net. Help link is added to Version 1.00

[Summary / 한글 설명] LSJ-Link는 개발자와 엔지니어를 위한 직관적인 시리얼 통신 터미널 프로그램입니다. 아두이노(Arduino), 임베디드 보드와의 안정적인 데이터 송수신을 지원하며, 복잡한 설정 없이도 즉각적으로 하드웨어를 제어할 수 있도록 설계되었습니다. 루시퍼(Lucifer) 런처의 핵심 통신 엔진을 독립형 버전으로 만나보세요. [Key Features / 주요 기능] Instant Connectivity: 간단한 포트 및 보드레이트(Baud rate) 설정으로 즉시 연결 가능. Real-time Monitoring: 송수신 데이터를 실시간 로그창으로 확인. Lightweight & Fast: 군더더기 없는 로직으로 시스템 자원 점유율 최소화. User-friendly Interface: 직관적인 UI로 초보자부터 전문가까지 쉽게 사용. [Short Description (영문 요약)] LSJ-Link is a high-performance serial communication tool designed for developers working with Arduino and embedded systems. Experience stable data transmission and real-time monitoring with a simple, intuitive interface.

The MtxOrbCtl program allows you to control a Matrix Orbital Serial LCD screen from the command line. It is designed to be used in conjunction with shell scripting to show the status of boots, etc.

The N8VB vCOM Virtual Serial Port Driver creates pairs of virtual serial ports on your Windows 2000 or XP system that are "virtually" connected together like a null modem cable. It behaves like a Virtual Null Modem Cable.

BASIC interpreter for the 16bit PIC microcontroller 24FJ64GA002. The interpreter runs on the chip only, no compiler/tokenizer is needed. Communication with PC is done by USB-to-serial converter cable.

Este projeto visa controlar através da porta serial um dispositivo. compatível com hardware da Robotica Simples, porem pode ser modificado para qualquer outro produto serial. O Hardware atendido é a placa controladora de 8 reles.

Program is written in C++ for Windows. Program is installed on a computer connected to the card reader used com-port. Program reads data from com port and writes data to local log, transmits it to ARM of guard and to SCUD server in form of text files.

Serial Terminal for Linux intended for embedded developers and system administrators. Intended to replace minicom.

This application is a ASCII-based data scope. When used with a 'spy' cable such as the CBL-Full-1A product from www.commfront.com this progrmam shows the ASCII chars on both sides of a comm link. There are three main tabs on the user interface. The 'Vertical' tab displays the comm link conversation in a vertically-scrolling half-duplex mode. Each 'side' of the conversation is detected by the user-configured 'start msg' and 'end msg' byte sequence. The 'Horizontal' tab shows bytes, one at a time, as they are received on each side of the link so the relative timing relationships can be monitored. Printable ASCII chars are shown. Non-printable are shown with a '0x' prefix. The two sides of this link referred to as 'Port 1' and 'Port 2'. Each side must communicate at the same baud rate. Each side can have its' own start message and end message character configurations. A log tab where state and error messages can be reviewed.

This project contains the Linux serial driver for 8250/16550 (and compatible) UARTs. It is packaged in a stand-alone form that can be used with older and newer kernel versions. It also serves as a focal point for further serial driver development.

Xpacket - the porpular Packet-Radio Terminal Plan is a Port to Linux. Actually there are the Sources from 1.81b8 . We need all Help!

Telnet to serial gateway for embedded development

Mprog is a tool designed for programming microcontroller. At the moment it supports only Atmel AVR microcontroller It support read / write programm flash / eeprom. To file firmat are supported: binary & Intel hex.

Ponticulus (a virtual COM-port over TCP/IP redirector) allows synchronous connecting and disconnecting to a remote serial port (e.g. on an embedded device). It was initially based on com2tcp, part of the com0com project. (http://com0com.sourceforge.net/)

Sredird is a serial port redirector that is compliant with the RFC 2217 "Telnet Com Port Control Option" protocol. This protocol lets you share a serial port through the network. RFC 2217 was orginally implemented in Cisco Terminal Servers in IOS version 11.x.

This serial client in JAVA allows sending, reading and writing of SMS via a serial COM port. The tool uses the PDU SMS format. IRDA drivers are included. The functionality can be implemented into applications for remote alerting or SMS authentification.

GPS-aided car kinematics calculator. Computes forward and lateral accelerations of the vehicle, time to reach some speed and some distance. It will work on PocketPC.

Serial terminal in assembly x86 language that works without operational systems, suport ANSI and can be used on a laptop or notebook to easily and quickly configure routers, switches and other devices that uses serial comm ports

This is a set of Cocoa wrapper classes to access serial ports in Mac OS X.

The aim of the APterm project was to develop a terminal program running on TI-89 (possibly TI-92+ and V200 too). Some work was done, but due to TI's choice of cable it is not practically possible to make a terminal application. What the project has pro

There's been a lot of churn around AMS since it began back in Rails 3.2 and a lot of new libraries are around and the JSON:API spec has reached 1.0. If there is to be a 1.0 release of AMS, it will need to address the general needs of serialization in much the way ActiveJob can be used with different workers. The next major release is in development. We're starting simple and avoiding, at least at the outset, all the complications in AMS version, especially all the implicit behavior from guessing the serializer, to the association's serializer, to the serialization type, etc. The basic idea is that models to serializers are a one to many relationship. Everything will need to be explicit. If you want to serialize a User with a UserSerializer, you'll need to call it directly. The serializer will essentially be for defining a basic JSON:API resource object: id, type, attributes, and relationships.

Apache Avro™ is a data serialization system. Simple integration with dynamic languages. Code generation is not required to read or write data files nor to use or implement RPC protocols. Code generation is an optional optimization, is only worth implementing for statically typed languages. Avro relies on schemas. When Avro data is read, the schema used when writing it is always present. This permits each datum to be written with no per-value overheads, making serialization both fast and small. This also facilitates use with dynamic, scripting languages, since data, together with its schema, is fully self-describing. When Avro data is stored in a file, its schema is stored with it, so that files may be processed later by any program. If the program reading the data expects a different schema this can be easily resolved, since both schemas are present.

Arm mini real-time OS, cooperative kernel for LPC 2106, Arm TDMI-s cores.

OpenSource component library for serial communication

This project aims to produce an efficient Java library for decoding and encoding the SMS binary format as defined in 3GPP TS 23.040. This project has moved to http://attention.googlecode.com/