Menu
▾
▴
devil-linux-discuss
|
From: Ma p. <the...@gm...> - 2016-08-23 16:03:58
|
Hi, I use the 1.8.0-rc2-2016-08-13-x86_64 I just try to start a cluster using corosync and pacemaker and i stop my test , cannot find the crm binary ! Kind Regards |
|
From: Heiko Z. <he...@zu...> - 2016-08-24 12:34:02
|
Hi, I won't get a chance to look into this until the weekend. Heiko Quoting Ma poubelle <the...@gm...>: > Hi, > > I use the 1.8.0-rc2-2016-08-13-x86_64 > > I just try to start a cluster using corosync and pacemaker and i > stop my test , cannot find the crm binary ! > > Kind Regards > > > -- Regards Heiko Zuerker |
|
From: Heiko Z. <he...@zu...> - 2016-08-28 13:39:35
|
Hey, I looked into this and all the crm binaries are there and corosync & pacemaker started for me. Do you have a specific error message you can share? Did you start with a vanilla config or are you upgrading something? Heiko Quoting Heiko Zuerker <he...@zu...>: > Hi, > > I won't get a chance to look into this until the weekend. > > Heiko > > Quoting Ma poubelle <the...@gm...>: > >> Hi, >> >> I use the 1.8.0-rc2-2016-08-13-x86_64 >> >> I just try to start a cluster using corosync and pacemaker and i >> stop my test , cannot find the crm binary ! >> >> Kind Regards >> >> >> > > > -- > > Regards > Heiko Zuerker > -- Regards Heiko Zuerker |
|
From: Ma p. <the...@gm...> - 2016-09-05 15:39:27
|
Hi Heiko, All the crm_... binaries is installed and work. My request is about the crm from crmsh . The shell to interactively configure HA. https://github.com/ClusterLabs/crmsh And other tools I like to use is pcs (Pacemaker/Corosync configuration system) https://github.com/ClusterLabs/pcs Can you integrate them on new rc ? Kind Regards 2016-08-28 15:39 GMT+02:00 Heiko Zuerker <he...@zu...>: > Hey, > > I looked into this and all the crm binaries are there and corosync & > pacemaker started for me. > Do you have a specific error message you can share? > Did you start with a vanilla config or are you upgrading something? > > Heiko > > Quoting Heiko Zuerker <he...@zu...>: > > Hi, > > I won't get a chance to look into this until the weekend. > > Heiko > > Quoting Ma poubelle <the...@gm...>: > > Hi, > > I use the 1.8.0-rc2-2016-08-13-x86_64 > > I just try to start a cluster using corosync and pacemaker and i stop my > test , cannot find the crm binary ! > > Kind Regards > > > > > > > > -- > > Regards > Heiko Zuerker > > > > > > -- > > Regards > Heiko Zuerker > > > ------------------------------------------------------------ > ------------------ > > _______________________________________________ > Devil-linux-discuss mailing list > Dev...@li... > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > > |
|
From: Heiko Z. <he...@zu...> - 2016-09-08 12:48:20
|
Hey I'm hoping to get a chance on Saturday to work on the missing components. Stay tuned for further updates & sorry for being so slow. Heiko Quoting Ma poubelle <the...@gm...>: > Hi Heiko, > All the crm_... binaries is installed and work. > > My request is about the crm from crmsh . The shell to > interactively configure HA. https://github.com/ClusterLabs/crmsh > > And other tools I like to use is pcs (Pacemaker/Corosync > configuration system) https://github.com/ClusterLabs/pcs > > Can you integrate them on new rc ? > > Kind Regards > > > > > 2016-08-28 15:39 GMT+02:00 Heiko Zuerker <he...@zu...>: > >> _Hey, >> >> I looked into this and all the crm binaries are there and corosync >> & pacemaker started for me. >> Do you have a specific error message you can share? >> Did you start with a vanilla config or are you upgrading something? >> >> Heiko >> >> Quoting Heiko Zuerker <he...@zu...>:_ >> >>> _Hi, >>> >>> I won't get a chance to look into this until the weekend. >>> >>> Heiko >>> >>> Quoting Ma poubelle <the...@gm...>:_ >>> >>>> _Hi, >>>> _ >>>> _I use the 1.8.0-rc2-2016-08-13-x86_64_ >>>> >>>> _I just try to start a cluster using corosync and pacemaker and i >>>> stop my test , cannot find the crm binary ! >>>> _ >>>> _Kind Regards_ >>>> >>>> >>>> _ _ >>> >>> >>> _-- >>> >>> Regards >>> Heiko Zuerker >>> _ >> >> >> >> >> _-- >> >> Regards >> Heiko Zuerker >> _ >> >> _------------------------------------------------------------------------------ >> >> _______________________________________________ >> Devil-linux-discuss mailing list >> Dev...@li... >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss_ >> -- Regards Heiko Zuerker |
|
From: Heiko Z. <he...@zu...> - 2016-09-10 15:11:22
|
They changes are in CVS. I don't think I'll be able to upload the nightly compile for at leat a few days. I'll get it done as soon as I can. Heiko Quoting Heiko Zuerker <he...@zu...>: > Hey > > I'm hoping to get a chance on Saturday to work on the missing > components. Stay tuned for further updates & sorry for being so slow. > > Heiko > > Quoting Ma poubelle <the...@gm...>: > >> Hi Heiko, >> All the crm_... binaries is installed and work. >> >> My request is about the crm from crmsh . The shell to >> interactively configure HA. https://github.com/ClusterLabs/crmsh >> >> And other tools I like to use is pcs (Pacemaker/Corosync >> configuration system) https://github.com/ClusterLabs/pcs >> >> Can you integrate them on new rc ? >> >> Kind Regards >> >> >> >> >> 2016-08-28 15:39 GMT+02:00 Heiko Zuerker <he...@zu...>: >> >>> _Hey, >>> >>> I looked into this and all the crm binaries are there and corosync >>> & pacemaker started for me. >>> Do you have a specific error message you can share? >>> Did you start with a vanilla config or are you upgrading something? >>> >>> Heiko >>> >>> Quoting Heiko Zuerker <he...@zu...>:_ >>> >>>> _Hi, >>>> >>>> I won't get a chance to look into this until the weekend. >>>> >>>> Heiko >>>> >>>> Quoting Ma poubelle <the...@gm...>:_ >>>> >>>>> _Hi, >>>>> _ >>>>> _I use the 1.8.0-rc2-2016-08-13-x86_64_ >>>>> >>>>> _I just try to start a cluster using corosync and pacemaker and >>>>> i stop my test , cannot find the crm binary ! >>>>> _ >>>>> _Kind Regards_ >>>>> >>>>> >>>>> _ _ >>>> >>>> >>>> _-- >>>> >>>> Regards >>>> Heiko Zuerker >>>> _ >>> >>> >>> >>> >>> _-- >>> >>> Regards >>> Heiko Zuerker >>> _ >>> >>> _------------------------------------------------------------------------------ >>> >>> _______________________________________________ >>> Devil-linux-discuss mailing list >>> Dev...@li... >>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss_ >>> > > > -- > > Regards > Heiko Zuerker > -- Regards Heiko Zuerker |
|
From: Heiko Z. <he...@zu...> - 2016-09-24 12:25:07
|
Sorry for the delay. The latest build is uploading now. It should be done ~1 hour from the time I sent this email. Heiko Quoting Heiko Zuerker <he...@zu...>: > They changes are in CVS. I don't think I'll be able to upload the > nightly compile for at leat a few days. I'll get it done as soon as > I can. > > Heiko > > Quoting Heiko Zuerker <he...@zu...>: > >> Hey >> >> I'm hoping to get a chance on Saturday to work on the missing >> components. Stay tuned for further updates & sorry for being so slow. >> >> Heiko >> >> Quoting Ma poubelle <the...@gm...>: >> >>> Hi Heiko, >>> All the crm_... binaries is installed and work. >>> >>> My request is about the crm from crmsh . The shell to >>> interactively configure HA. https://github.com/ClusterLabs/crmsh >>> >>> And other tools I like to use is pcs (Pacemaker/Corosync >>> configuration system) https://github.com/ClusterLabs/pcs >>> >>> Can you integrate them on new rc ? >>> >>> Kind Regards >>> >>> >>> >>> >>> 2016-08-28 15:39 GMT+02:00 Heiko Zuerker <he...@zu...>: >>> >>>> _Hey, >>>> >>>> I looked into this and all the crm binaries are there and >>>> corosync & pacemaker started for me. >>>> Do you have a specific error message you can share? >>>> Did you start with a vanilla config or are you upgrading something? >>>> >>>> Heiko >>>> >>>> Quoting Heiko Zuerker <he...@zu...>:_ >>>> >>>>> _Hi, >>>>> >>>>> I won't get a chance to look into this until the weekend. >>>>> >>>>> Heiko >>>>> >>>>> Quoting Ma poubelle <the...@gm...>:_ >>>>> >>>>>> _Hi, >>>>>> _ >>>>>> _I use the 1.8.0-rc2-2016-08-13-x86_64_ >>>>>> >>>>>> _I just try to start a cluster using corosync and pacemaker and >>>>>> i stop my test , cannot find the crm binary ! >>>>>> _ >>>>>> _Kind Regards_ >>>>>> >>>>>> >>>>>> _ _ >>>>> >>>>> >>>>> _-- >>>>> >>>>> Regards >>>>> Heiko Zuerker >>>>> _ >>>> >>>> >>>> >>>> >>>> _-- >>>> >>>> Regards >>>> Heiko Zuerker >>>> _ >>>> >>>> _------------------------------------------------------------------------------ >>>> >>>> _______________________________________________ >>>> Devil-linux-discuss mailing list >>>> Dev...@li... >>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss_ >>>> >> >> >> -- >> >> Regards >> Heiko Zuerker >> > > > -- > > Regards > Heiko Zuerker > -- Regards Heiko Zuerker |
|
From: Ma p. <the...@gm...> - 2016-09-27 08:39:51
|
Hello Heiko,
Thanks for the update. We approach the goal.
I think that misses some Python modules
When I launch crm I get the following output
root@DL1:~ # crm
Fatal error:
No module named lxml
No module named modules
Failed to start crmsh! This is likely due to a broken
installation or a missing dependency.
If you are using a packaged version of crmsh, please try
reinstalling the package. Also check your PYTHONPATH and
make sure that the crmsh module is reachable.
Please file an issue describing your installation at
https://github.com/Clusterlabs/crmsh/issues/ .
root@DL1:~ #
And when I launch pcs :
root@DL1:~ # pcs
Traceback (most recent call last):
File "/usr/sbin/pcs", line 9, in <module>
load_entry_point('pcs==0.9.153', 'console_scripts', 'pcs')()
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line
519, in load_entry_point
return get_distribution(dist).load_entry_point(group, name)
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line
2630, in load_entry_point
return ep.load()
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line
2310, in load
return self.resolve()
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line
2316, in resolve
module = __import__(self.module_name, fromlist=['__name__'], level=0)
File "/usr/lib/python2.7/site-packages/pcs/app.py", line 14, in <module>
from pcs import (
File "/usr/lib/python2.7/site-packages/pcs/acl.py", line 10, in <module>
from pcs import (
File "/usr/lib/python2.7/site-packages/pcs/prop.py", line 13, in <module>
from pcs import utils
File "/usr/lib/python2.7/site-packages/pcs/utils.py", line 65, in <module>
from pcs.lib.env import LibraryEnvironment
File "/usr/lib/python2.7/site-packages/pcs/lib/env.py", line 8, in
<module>
from lxml import etree
ImportError: No module named lxml
root@DL1:~ #
Regards
Christian
2016-09-24 14:24 GMT+02:00 Heiko Zuerker <he...@zu...>:
> Sorry for the delay. The latest build is uploading now.
> It should be done ~1 hour from the time I sent this email.
>
>
> Heiko
>
> Quoting Heiko Zuerker <he...@zu...>:
>
> They changes are in CVS. I don't think I'll be able to upload the nightly
> compile for at leat a few days. I'll get it done as soon as I can.
>
> Heiko
>
> Quoting Heiko Zuerker <he...@zu...>:
>
> Hey
>
> I'm hoping to get a chance on Saturday to work on the missing components.
> Stay tuned for further updates & sorry for being so slow.
>
> Heiko
>
> Quoting Ma poubelle <the...@gm...>:
>
> Hi Heiko,
>
> All the crm_... binaries is installed and work.
>
> My request is about the crm from crmsh . The shell to interactively
> configure HA. https://github.com/ClusterLabs/crmsh
>
> And other tools I like to use is pcs (Pacemaker/Corosync configuration
> system) https://github.com/ClusterLabs/pcs
>
> Can you integrate them on new rc ?
>
> Kind Regards
>
>
>
> 2016-08-28 15:39 GMT+02:00 Heiko Zuerker <he...@zu...>:
>
>>
>>
>>
>>
>>
>>
>>
>>
>> *Hey, I looked into this and all the crm binaries are there and corosync
>> & pacemaker started for me. Do you have a specific error message you can
>> share? Did you start with a vanilla config or are you upgrading something?
>> Heiko Quoting Heiko Zuerker <he...@zu... <he...@zu...>>:*
>>
>>
>>
>>
>>
>>
>>
>> *Hi, I won't get a chance to look into this until the weekend. Heiko
>> Quoting Ma poubelle <the...@gm... <the...@gm...>>:*
>>
>>
>> *Hi, *
>> *I use the 1.8.0-rc2-2016-08-13-x86_64*
>>
>>
>> *I just try to start a cluster using corosync and pacemaker and i stop my
>> test , cannot find the crm binary ! *
>> *Kind Regards*
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> *-- Regards Heiko Zuerker *
>>
>>
>>
>>
>>
>>
>>
>>
>> *-- Regards Heiko Zuerker *
>>
>>
>>
>>
>>
>>
>> *------------------------------------------------------------------------------
>> _______________________________________________ Devil-linux-discuss mailing
>> list Dev...@li...
>> <Dev...@li...>
>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss
>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>*
>>
>
>
>
>
> --
>
> Regards
> Heiko Zuerker
>
>
>
>
>
> --
>
> Regards
> Heiko Zuerker
>
>
>
>
>
> --
>
> Regards
> Heiko Zuerker
>
>
> ------------------------------------------------------------
> ------------------
>
> _______________________________________________
> Devil-linux-discuss mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss
>
>
|
|
From: Heiko Z. <he...@zu...> - 2016-10-02 12:34:02
|
Christian, All the missing python modules are now included. This turned out to be a bit more complicated, since I had to make some significant changes to how python modules get included. The new solution is much more flexible and will make it a lot easier to add python modules. (similar to how perl is handled). I'll upload a new testing release in the next couple of days. Heiko Quoting Ma poubelle <the...@gm...>: > Hello Heiko, > > Thanks for the update. We approach the goal. > > I think that misses some Python modules > > When I launch crm I get the following output > > > root@DL1:~ # crm > Fatal error: > No module named lxml > No module named modules > > Failed to start crmsh! This is likely due to a broken > installation or a missing dependency. > > If you are using a packaged version of crmsh, please try > reinstalling the package. Also check your PYTHONPATH and > make sure that the crmsh module is reachable. > > Please file an issue describing your installation at > https://github.com/Clusterlabs/crmsh/issues/ . > root@DL1:~ # > > > And when I launch pcs : > > root@DL1:~ # pcs > Traceback (most recent call last): > File "/usr/sbin/pcs", line 9, in <module> > load_entry_point('pcs==0.9.153', 'console_scripts', 'pcs')() > File > "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line > 519, in load_entry_point > return get_distribution(dist).load_entry_point(group, name) > File > "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line > 2630, in load_entry_point > return ep.load() > File > "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line > 2310, in load > return self.resolve() > File > "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line > 2316, in resolve > module = __import__(self.module_name, fromlist=['__name__'], level=0) > File "/usr/lib/python2.7/site-packages/pcs/app.py", line 14, in <module> > from pcs import ( > File "/usr/lib/python2.7/site-packages/pcs/acl.py", line 10, in <module> > from pcs import ( > File "/usr/lib/python2.7/site-packages/pcs/prop.py", line 13, > in <module> > from pcs import utils > File "/usr/lib/python2.7/site-packages/pcs/utils.py", line 65, > in <module> > from pcs.lib.env import LibraryEnvironment > File "/usr/lib/python2.7/site-packages/pcs/lib/env.py", line 8, > in <module> > from lxml import etree > ImportError: No module named lxml > root@DL1:~ # > > Regards > > Christian > > > > 2016-09-24 14:24 GMT+02:00 Heiko Zuerker <he...@zu...>: > >> _Sorry for the delay. The latest build is uploading now. >> It should be done ~1 hour from the time I sent this email._ >> >> >> _Heiko >> >> Quoting Heiko Zuerker <he...@zu...>:_ >> >> >> >>> _They changes are in CVS. I don't think I'll be able to upload the >>> nightly compile for at leat a few days. I'll get it done as soon >>> as I can. >>> >>> Heiko >>> >>> Quoting Heiko Zuerker <he...@zu...>:_ >>> >>>> _Hey >>>> >>>> I'm hoping to get a chance on Saturday to work on the missing >>>> components. Stay tuned for further updates & sorry for being so >>>> slow. >>>> >>>> Heiko >>>> >>>> Quoting Ma poubelle <the...@gm...>:_ >>>> >>>>> _Hi Heiko, _ _ _ >>>>> _All the crm_... binaries is installed and work. _ >>>>> _ _ >>>>> _My request is about the crm from crmsh . The shell >>>>> to interactively configure HA. >>>>> https://github.com/ClusterLabs/crmsh_ >>>>> _ _ >>>>> _And other tools I like to use is pcs >>>>> (Pacemaker/Corosync configuration system) >>>>> https://github.com/ClusterLabs/pcs_ >>>>> _ _ >>>>> _Can you integrate them on new rc ?_ >>>>> _ _ >>>>> _Kind Regards_ >>>>> _ _ >>>>> _ _ >>>>> >>>>> >>>>> _2016-08-28 15:39 GMT+02:00 Heiko Zuerker >>>>> <he...@zu...>:_ >>>>> >>>>>> __Hey, >>>>>> >>>>>> I looked into this and all the crm binaries are there and >>>>>> corosync & pacemaker started for me. >>>>>> Do you have a specific error message you can share? >>>>>> Did you start with a vanilla config or are you upgrading something? >>>>>> >>>>>> Heiko >>>>>> >>>>>> Quoting Heiko Zuerker <he...@zu...>:__ >>>>>> >>>>>>> __Hi, >>>>>>> >>>>>>> I won't get a chance to look into this until the weekend. >>>>>>> >>>>>>> Heiko >>>>>>> >>>>>>> Quoting Ma poubelle <the...@gm...>:__ >>>>>>> >>>>>>>> __Hi, >>>>>>>> __ >>>>>>>> __I use the 1.8.0-rc2-2016-08-13-x86_64__ >>>>>>>> >>>>>>>> __I just try to start a cluster using corosync and pacemaker >>>>>>>> and i stop my test , cannot find the crm binary ! >>>>>>>> __ >>>>>>>> __Kind Regards__ >>>>>>>> >>>>>>>> >>>>>>>> __ __ >>>>>>> >>>>>>> >>>>>>> __-- >>>>>>> >>>>>>> Regards >>>>>>> Heiko Zuerker >>>>>>> __ >>>>>> >>>>>> _ _ >>>>>> >>>>>> >>>>>> __-- >>>>>> >>>>>> Regards >>>>>> Heiko Zuerker >>>>>> __ >>>>>> >>>>>> __------------------------------------------------------------------------------ >>>>>> >>>>>> _______________________________________________ >>>>>> Devil-linux-discuss mailing list >>>>>> Dev...@li... >>>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss_ >>>>>> _ >>>> >>>> >>>> _-- >>>> >>>> Regards >>>> Heiko Zuerker >>>> _ >>> >>> >>> _-- >>> >>> Regards >>> Heiko Zuerker >>> _ >> >> >> >> >> _-- >> >> Regards >> Heiko Zuerker >> _ >> >> _------------------------------------------------------------------------------ >> >> _______________________________________________ >> Devil-linux-discuss mailing list >> Dev...@li... >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss_ >> -- Regards Heiko Zuerker |
|
From: Heiko Z. <he...@zu...> - 2016-10-06 12:58:16
|
Christian, The latest build is uploading now to the testing directory. It should be complete about 30 minutes after I sent this email. Heiko Quoting Heiko Zuerker <he...@zu...>: > Christian, > > All the missing python modules are now included. > This turned out to be a bit more complicated, since I had to make > some significant changes to how python modules get included. The new > solution is much more flexible and will make it a lot easier to add > python modules. (similar to how perl is handled). > > I'll upload a new testing release in the next couple of days. > > Heiko > > Quoting Ma poubelle <the...@gm...>: > >> Hello Heiko, >> >> Thanks for the update. We approach the goal. >> >> I think that misses some Python modules >> >> When I launch crm I get the following output >> >> >> root@DL1:~ # crm >> Fatal error: >> No module named lxml >> No module named modules >> >> Failed to start crmsh! This is likely due to a broken >> installation or a missing dependency. >> >> If you are using a packaged version of crmsh, please try >> reinstalling the package. Also check your PYTHONPATH and >> make sure that the crmsh module is reachable. >> >> Please file an issue describing your installation at >> https://github.com/Clusterlabs/crmsh/issues/ . >> root@DL1:~ # >> >> >> And when I launch pcs : >> >> root@DL1:~ # pcs >> Traceback (most recent call last): >> File "/usr/sbin/pcs", line 9, in <module> >> load_entry_point('pcs==0.9.153', 'console_scripts', 'pcs')() >> File >> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line >> 519, in load_entry_point >> return get_distribution(dist).load_entry_point(group, name) >> File >> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line >> 2630, in load_entry_point >> return ep.load() >> File >> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line >> 2310, in load >> return self.resolve() >> File >> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line >> 2316, in resolve >> module = __import__(self.module_name, >> fromlist=['__name__'], level=0) >> File "/usr/lib/python2.7/site-packages/pcs/app.py", line 14, >> in <module> >> from pcs import ( >> File "/usr/lib/python2.7/site-packages/pcs/acl.py", line 10, >> in <module> >> from pcs import ( >> File "/usr/lib/python2.7/site-packages/pcs/prop.py", line 13, >> in <module> >> from pcs import utils >> File "/usr/lib/python2.7/site-packages/pcs/utils.py", line >> 65, in <module> >> from pcs.lib.env import LibraryEnvironment >> File "/usr/lib/python2.7/site-packages/pcs/lib/env.py", line >> 8, in <module> >> from lxml import etree >> ImportError: No module named lxml >> root@DL1:~ # >> >> Regards >> >> Christian >> >> >> >> 2016-09-24 14:24 GMT+02:00 Heiko Zuerker <he...@zu...>: >> >>> _Sorry for the delay. The latest build is uploading now. >>> It should be done ~1 hour from the time I sent this email._ >>> >>> >>> _Heiko >>> >>> Quoting Heiko Zuerker <he...@zu...>:_ >>> >>> >>> >>>> _They changes are in CVS. I don't think I'll be able to upload >>>> the nightly compile for at leat a few days. I'll get it done as >>>> soon as I can. >>>> >>>> Heiko >>>> >>>> Quoting Heiko Zuerker <he...@zu...>:_ >>>> >>>>> _Hey >>>>> >>>>> I'm hoping to get a chance on Saturday to work on the missing >>>>> components. Stay tuned for further updates & sorry for being so >>>>> slow. >>>>> >>>>> Heiko >>>>> >>>>> Quoting Ma poubelle <the...@gm...>:_ >>>>> >>>>>> _Hi Heiko, _ _ _ >>>>>> _All the crm_... binaries is installed and work. _ >>>>>> _ _ >>>>>> _My request is about the crm from crmsh . The >>>>>> shell to interactively configure HA. >>>>>> https://github.com/ClusterLabs/crmsh_ >>>>>> _ _ >>>>>> _And other tools I like to use is pcs >>>>>> (Pacemaker/Corosync configuration system) >>>>>> https://github.com/ClusterLabs/pcs_ >>>>>> _ _ >>>>>> _Can you integrate them on new rc ?_ >>>>>> _ _ >>>>>> _Kind Regards_ >>>>>> _ _ >>>>>> _ _ >>>>>> >>>>>> >>>>>> _2016-08-28 15:39 GMT+02:00 Heiko Zuerker >>>>>> <he...@zu...>:_ >>>>>> >>>>>>> __Hey, >>>>>>> >>>>>>> I looked into this and all the crm binaries are there and >>>>>>> corosync & pacemaker started for me. >>>>>>> Do you have a specific error message you can share? >>>>>>> Did you start with a vanilla config or are you upgrading something? >>>>>>> >>>>>>> Heiko >>>>>>> >>>>>>> Quoting Heiko Zuerker <he...@zu...>:__ >>>>>>> >>>>>>>> __Hi, >>>>>>>> >>>>>>>> I won't get a chance to look into this until the weekend. >>>>>>>> >>>>>>>> Heiko >>>>>>>> >>>>>>>> Quoting Ma poubelle <the...@gm...>:__ >>>>>>>> >>>>>>>>> __Hi, >>>>>>>>> __ >>>>>>>>> __I use the 1.8.0-rc2-2016-08-13-x86_64__ >>>>>>>>> >>>>>>>>> __I just try to start a cluster using corosync and pacemaker >>>>>>>>> and i stop my test , cannot find the crm binary ! >>>>>>>>> __ >>>>>>>>> __Kind Regards__ >>>>>>>>> >>>>>>>>> >>>>>>>>> __ __ >>>>>>>> >>>>>>>> >>>>>>>> __-- >>>>>>>> >>>>>>>> Regards >>>>>>>> Heiko Zuerker >>>>>>>> __ >>>>>>> >>>>>>> _ _ >>>>>>> >>>>>>> >>>>>>> __-- >>>>>>> >>>>>>> Regards >>>>>>> Heiko Zuerker >>>>>>> __ >>>>>>> >>>>>>> __------------------------------------------------------------------------------ >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Devil-linux-discuss mailing list >>>>>>> Dev...@li... >>>>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss_ >>>>>>> _ >>>>> >>>>> >>>>> _-- >>>>> >>>>> Regards >>>>> Heiko Zuerker >>>>> _ >>>> >>>> >>>> _-- >>>> >>>> Regards >>>> Heiko Zuerker >>>> _ >>> >>> >>> >>> >>> _-- >>> >>> Regards >>> Heiko Zuerker >>> _ >>> >>> _------------------------------------------------------------------------------ >>> >>> _______________________________________________ >>> Devil-linux-discuss mailing list >>> Dev...@li... >>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss_ >>> > > > -- > > Regards > Heiko Zuerker > -- Regards Heiko Zuerker |
|
From: Heiko Z. <he...@zu...> - 2016-10-15 13:42:58
|
Christian, Did you get a chance to test if it works now? Heiko Quoting Heiko Zuerker <he...@zu...>: > Christian, > > The latest build is uploading now to the testing directory. > It should be complete about 30 minutes after I sent this email. > > Heiko > > Quoting Heiko Zuerker <he...@zu...>: > >> Christian, >> >> All the missing python modules are now included. >> This turned out to be a bit more complicated, since I had to make >> some significant changes to how python modules get included. The >> new solution is much more flexible and will make it a lot easier to >> add python modules. (similar to how perl is handled). >> >> I'll upload a new testing release in the next couple of days. >> >> Heiko >> >> Quoting Ma poubelle <the...@gm...>: >> >>> Hello Heiko, >>> >>> Thanks for the update. We approach the goal. >>> >>> I think that misses some Python modules >>> >>> When I launch crm I get the following output >>> >>> >>> root@DL1:~ # crm >>> Fatal error: >>> No module named lxml >>> No module named modules >>> >>> Failed to start crmsh! This is likely due to a broken >>> installation or a missing dependency. >>> >>> If you are using a packaged version of crmsh, please try >>> reinstalling the package. Also check your PYTHONPATH and >>> make sure that the crmsh module is reachable. >>> >>> Please file an issue describing your installation at >>> https://github.com/Clusterlabs/crmsh/issues/ . >>> root@DL1:~ # >>> >>> >>> And when I launch pcs : >>> >>> root@DL1:~ # pcs >>> Traceback (most recent call last): >>> File "/usr/sbin/pcs", line 9, in <module> >>> load_entry_point('pcs==0.9.153', 'console_scripts', 'pcs')() >>> File >>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line >>> 519, in load_entry_point >>> return get_distribution(dist).load_entry_point(group, name) >>> File >>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line >>> 2630, in load_entry_point >>> return ep.load() >>> File >>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line >>> 2310, in load >>> return self.resolve() >>> File >>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line >>> 2316, in resolve >>> module = __import__(self.module_name, >>> fromlist=['__name__'], level=0) >>> File "/usr/lib/python2.7/site-packages/pcs/app.py", line >>> 14, in <module> >>> from pcs import ( >>> File "/usr/lib/python2.7/site-packages/pcs/acl.py", line >>> 10, in <module> >>> from pcs import ( >>> File "/usr/lib/python2.7/site-packages/pcs/prop.py", line >>> 13, in <module> >>> from pcs import utils >>> File "/usr/lib/python2.7/site-packages/pcs/utils.py", line >>> 65, in <module> >>> from pcs.lib.env import LibraryEnvironment >>> File "/usr/lib/python2.7/site-packages/pcs/lib/env.py", >>> line 8, in <module> >>> from lxml import etree >>> ImportError: No module named lxml >>> root@DL1:~ # >>> >>> Regards >>> >>> Christian >>> >>> >>> >>> 2016-09-24 14:24 GMT+02:00 Heiko Zuerker <he...@zu...>: >>> >>>> _Sorry for the delay. The latest build is uploading now. >>>> It should be done ~1 hour from the time I sent this email._ >>>> >>>> >>>> _Heiko >>>> >>>> Quoting Heiko Zuerker <he...@zu...>:_ >>>> >>>> >>>> >>>>> _They changes are in CVS. I don't think I'll be able to upload >>>>> the nightly compile for at leat a few days. I'll get it done as >>>>> soon as I can. >>>>> >>>>> Heiko >>>>> >>>>> Quoting Heiko Zuerker <he...@zu...>:_ >>>>> >>>>>> _Hey >>>>>> >>>>>> I'm hoping to get a chance on Saturday to work on the missing >>>>>> components. Stay tuned for further updates & sorry for being so >>>>>> slow. >>>>>> >>>>>> Heiko >>>>>> >>>>>> Quoting Ma poubelle <the...@gm...>:_ >>>>>> >>>>>>> _Hi Heiko, _ _ _ >>>>>>> _All the crm_... binaries is installed and work. _ >>>>>>> _ _ >>>>>>> _My request is about the crm from crmsh . The >>>>>>> shell to interactively configure HA. >>>>>>> https://github.com/ClusterLabs/crmsh_ >>>>>>> _ _ >>>>>>> _And other tools I like to use is pcs >>>>>>> (Pacemaker/Corosync configuration system) >>>>>>> https://github.com/ClusterLabs/pcs_ >>>>>>> _ _ >>>>>>> _Can you integrate them on new rc ?_ >>>>>>> _ _ >>>>>>> _Kind Regards_ >>>>>>> _ _ >>>>>>> _ _ >>>>>>> >>>>>>> >>>>>>> _2016-08-28 15:39 GMT+02:00 Heiko Zuerker >>>>>>> <he...@zu...>:_ >>>>>>> >>>>>>>> __Hey, >>>>>>>> >>>>>>>> I looked into this and all the crm binaries are there and >>>>>>>> corosync & pacemaker started for me. >>>>>>>> Do you have a specific error message you can share? >>>>>>>> Did you start with a vanilla config or are you upgrading something? >>>>>>>> >>>>>>>> Heiko >>>>>>>> >>>>>>>> Quoting Heiko Zuerker <he...@zu...>:__ >>>>>>>> >>>>>>>>> __Hi, >>>>>>>>> >>>>>>>>> I won't get a chance to look into this until the weekend. >>>>>>>>> >>>>>>>>> Heiko >>>>>>>>> >>>>>>>>> Quoting Ma poubelle <the...@gm...>:__ >>>>>>>>> >>>>>>>>>> __Hi, >>>>>>>>>> __ >>>>>>>>>> __I use the 1.8.0-rc2-2016-08-13-x86_64__ >>>>>>>>>> >>>>>>>>>> __I just try to start a cluster using corosync and >>>>>>>>>> pacemaker and i stop my test , cannot find the crm binary ! >>>>>>>>>> __ >>>>>>>>>> __Kind Regards__ >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> __ __ >>>>>>>>> >>>>>>>>> >>>>>>>>> __-- >>>>>>>>> >>>>>>>>> Regards >>>>>>>>> Heiko Zuerker >>>>>>>>> __ >>>>>>>> >>>>>>>> _ _ >>>>>>>> >>>>>>>> >>>>>>>> __-- >>>>>>>> >>>>>>>> Regards >>>>>>>> Heiko Zuerker >>>>>>>> __ >>>>>>>> >>>>>>>> __------------------------------------------------------------------------------ >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Devil-linux-discuss mailing list >>>>>>>> Dev...@li... >>>>>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss_ >>>>>>>> _ >>>>>> >>>>>> >>>>>> _-- >>>>>> >>>>>> Regards >>>>>> Heiko Zuerker >>>>>> _ >>>>> >>>>> >>>>> _-- >>>>> >>>>> Regards >>>>> Heiko Zuerker >>>>> _ >>>> >>>> >>>> >>>> >>>> _-- >>>> >>>> Regards >>>> Heiko Zuerker >>>> _ >>>> >>>> _------------------------------------------------------------------------------ >>>> >>>> _______________________________________________ >>>> Devil-linux-discuss mailing list >>>> Dev...@li... >>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss_ >>>> >> >> >> -- >> >> Regards >> Heiko Zuerker >> > > > -- > > Regards > Heiko Zuerker > -- Regards Heiko Zuerker |
|
From: Ma p. <the...@gm...> - 2016-10-20 15:31:40
|
Hi Heiko, I currently testing the corosync & pacemaker. I don't have anymore error message when using crm & pcs. But my testing is not finish. I keep you informed when done. Kind Regards Christian 2016-10-15 15:42 GMT+02:00 Heiko Zuerker <he...@zu...>: > Christian, > > Did you get a chance to test if it works now? > > > Heiko > > Quoting Heiko Zuerker <he...@zu...>: > > Christian, > > The latest build is uploading now to the testing directory. > It should be complete about 30 minutes after I sent this email. > > Heiko > > Quoting Heiko Zuerker <he...@zu...>: > > Christian, > > All the missing python modules are now included. > This turned out to be a bit more complicated, since I had to make some > significant changes to how python modules get included. The new solution is > much more flexible and will make it a lot easier to add python modules. > (similar to how perl is handled). > > I'll upload a new testing release in the next couple of days. > > Heiko > > Quoting Ma poubelle <the...@gm...>: > > Hello Heiko, > > Thanks for the update. We approach the goal. > > I think that misses some Python modules > > When I launch crm I get the following output > > > root@DL1:~ # crm > Fatal error: > No module named lxml > No module named modules > > Failed to start crmsh! This is likely due to a broken > installation or a missing dependency. > > If you are using a packaged version of crmsh, please try > reinstalling the package. Also check your PYTHONPATH and > make sure that the crmsh module is reachable. > > Please file an issue describing your installation at > https://github.com/Clusterlabs/crmsh/issues/ . > root@DL1:~ # > > > And when I launch pcs : > > root@DL1:~ # pcs > Traceback (most recent call last): > File "/usr/sbin/pcs", line 9, in <module> > load_entry_point('pcs==0.9.153', 'console_scripts', 'pcs')() > File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line > 519, in load_entry_point > return get_distribution(dist).load_entry_point(group, name) > File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line > 2630, in load_entry_point > return ep.load() > File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line > 2310, in load > return self.resolve() > File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line > 2316, in resolve > module = __import__(self.module_name, fromlist=['__name__'], level=0) > File "/usr/lib/python2.7/site-packages/pcs/app.py", line 14, in <module> > from pcs import ( > File "/usr/lib/python2.7/site-packages/pcs/acl.py", line 10, in <module> > from pcs import ( > File "/usr/lib/python2.7/site-packages/pcs/prop.py", line 13, in > <module> > from pcs import utils > File "/usr/lib/python2.7/site-packages/pcs/utils.py", line 65, in > <module> > from pcs.lib.env import LibraryEnvironment > File "/usr/lib/python2.7/site-packages/pcs/lib/env.py", line 8, in > <module> > from lxml import etree > ImportError: No module named lxml > root@DL1:~ # > > Regards > > Christian > > > 2016-09-24 14:24 GMT+02:00 Heiko Zuerker <he...@zu...>: > >> >> *Sorry for the delay. The latest build is uploading now. It should be >> done ~1 hour from the time I sent this email.* >> >> >> >> >> *Heiko Quoting Heiko Zuerker <he...@zu... <he...@zu...>>:* >> >> >> >> >> >> >> >> *They changes are in CVS. I don't think I'll be able to upload the >> nightly compile for at leat a few days. I'll get it done as soon as I can. >> Heiko Quoting Heiko Zuerker <he...@zu... <he...@zu...>>:* >> >> >> >> >> >> >> >> *Hey I'm hoping to get a chance on Saturday to work on the missing >> components. Stay tuned for further updates & sorry for being so slow. Heiko >> Quoting Ma poubelle <the...@gm... <the...@gm...>>:* >> >> *Hi Heiko, * >> >> *All the crm_... binaries is installed and work. * >> >> *My request is about the crm from crmsh . The shell to interactively >> configure HA. https://github.com/ClusterLabs/crmsh >> <https://github.com/ClusterLabs/crmsh>* >> >> *And other tools I like to use is pcs (Pacemaker/Corosync configuration >> system) https://github.com/ClusterLabs/pcs >> <https://github.com/ClusterLabs/pcs>* >> >> *Can you integrate them on new rc ?* >> >> *Kind Regards* >> >> >> >> *2016-08-28 15:39 GMT+02:00 Heiko Zuerker <he...@zu... >> <he...@zu...>>:* >> >>> >>> >>> >>> >>> >>> >>> >>> >>> *Hey, I looked into this and all the crm binaries are there and corosync >>> & pacemaker started for me. Do you have a specific error message you can >>> share? Did you start with a vanilla config or are you upgrading something? >>> Heiko Quoting Heiko Zuerker <he...@zu... <he...@zu...>>:* >>> >>> >>> >>> >>> >>> >>> >>> *Hi, I won't get a chance to look into this until the weekend. Heiko >>> Quoting Ma poubelle <the...@gm... <the...@gm...>>:* >>> >>> >>> *Hi, * >>> *I use the 1.8.0-rc2-2016-08-13-x86_64* >>> >>> >>> *I just try to start a cluster using corosync and pacemaker and i stop >>> my test , cannot find the crm binary ! * >>> *Kind Regards* >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> *-- Regards Heiko Zuerker * >>> >>> >>> >>> >>> >>> >>> >>> >>> *-- Regards Heiko Zuerker * >>> >>> >>> >>> >>> >>> >>> >>> *------------------------------------------------------------------------------ >>> _______________________________________________ Devil-linux-discuss mailing >>> list Dev...@li... >>> <Dev...@li...> >>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> * >> >> >> >> >> >> >> >> >> *-- Regards Heiko Zuerker * >> >> >> >> >> >> >> >> >> *-- Regards Heiko Zuerker * >> >> >> >> >> >> >> >> >> *-- Regards Heiko Zuerker * >> >> >> >> >> >> >> *------------------------------------------------------------------------------ >> _______________________________________________ Devil-linux-discuss mailing >> list Dev...@li... >> <Dev...@li...> >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>* >> > > > > > -- > > Regards > Heiko Zuerker > > > > > > -- > > Regards > Heiko Zuerker > > > > > > -- > > Regards > Heiko Zuerker > > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > Devil-linux-discuss mailing list > Dev...@li... > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > > |
|
From: cdmiller <cdm...@ad...> - 2016-10-28 03:50:53
|
How do I get to the testing directory? Had to switch to 1.8.0rc1 in production due to Intel X540-AT2 card being very bad under 1.6.9 and need to switch to corosync pacemaker from heartbeat. Thanks, - cameron On 10/20/2016 09:31 AM, Ma poubelle wrote: > Hi Heiko, > > I currently testing the corosync & pacemaker. I don't have anymore > error message when using crm & pcs. But my testing is not finish. > > I keep you informed when done. > > Kind Regards > > Christian > > 2016-10-15 15:42 GMT+02:00 Heiko Zuerker <he...@zu... > <mailto:he...@zu...>>: > > __ > > Christian, > > Did you get a chance to test if it works now? > > > > Heiko > > Quoting Heiko Zuerker <he...@zu... > <mailto:he...@zu...>>: > >> Christian, >> >> The latest build is uploading now to the testing directory. >> It should be complete about 30 minutes after I sent this emai l. >> >> Heiko >> >> Quoting Heiko Zuerker <he...@zu... >> <mailto:he...@zu...>>: >> >>> Christian, >>> >>> All the missing python modules are now included. >>> This turned out to be a bit more complicated, since I had to >>> make some significant changes to how python modules get >>> included. The new solution is much more flexible and will >>> make it a lot easier to add python modules. (similar to how >>> perl is handled). >>> >>> I'll upload a new testing release in the next couple of days . >>> >>> Heiko >>> >>> Quoting Ma poubelle <the...@gm... >>> <mailto:the...@gm...>>: >>> >>>> Hello Heiko, >>>> >>>> Thanks for the update. We approach the goal. >>>> >>>> I think that misses some Python modules >>>> >>>> When I launch crm I get the following output >>>> >>>> >>>> root@DL1:~ # crm >>>> Fatal error: >>>> No module named lxml >>>> No module named modules >>>> >>>> Failed to start crmsh! This is likely due to a broken >>>> installation or a missing dependency. >>>> >>>> If you are using a packaged version of crmsh, please tr y >>>> reinstalling the package. Also check your PYTHONPATH an d >>>> make sure that the crmsh module is reachable. >>>> >>>> Please file an issue describing your installation at >>>> https://github.com/Clusterlabs/crmsh/issues/ >>>> <https://github.com/Clusterlabs/crmsh/issues/> . >>>> root@DL1:~ # >>>> >>>> >>>> And when I launch pcs : >>>> >>>> root@DL1:~ # pcs >>>> Traceback (most recent call last): >>>> File "/usr/sbin/pcs", line 9, in <module> >>>> load_entry_point('pcs==0.9.153', 'console_scripts', 'pc s')() >>>> File >>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py ", line >>>> 519, in load_entry_point >>>> return get_distribution(dist).load_entry_point(group, n ame) >>>> File >>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py ", line >>>> 2630, in load_entry_point >>>> return ep.load() >>>> File >>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py ", line >>>> 2310, in load >>>> return self.resolve() >>>> File >>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py ", line >>>> 2316, in resolve >>>> module = __import__(self.module_name, >>>> fromlist=['__name__'], level=0) >>>> File "/usr/lib/python2.7/site-packages/pcs/app.py", line >>>> 14, in <module> >>>> from pcs import ( >>>> File "/usr/lib/python2.7/site-packages/pcs/acl.py", line >>>> 10, in <module> >>>> from pcs import ( >>>> File "/usr/lib/python2.7/site-packages/pcs/prop.py", line >>>> 13, in <module> >>>> from pcs import utils >>>> File "/usr/lib/python2.7/site-packages/pcs/utils.py", lin e >>>> 65, in <module> >>>> from pcs.lib.env import LibraryEnvironment >>>> File "/usr/lib/python2.7/site-packages/pcs/lib/env.py", >>>> line 8, in <module> >>>> from lxml import etree >>>> ImportError: No module named lxml >>>> root@DL1:~ # >>>> >>>> Regards >>>> >>>> Christian >>>> >>>> >>>> 2016-09-24 14:24 GMT+02:00 Heiko Zuerker <he...@zu... >>>> <mailto:he...@zu...>>: >>>> >>>> _Sorry for the delay. The latest build is uploading now . >>>> It should be done ~1 hour from the time I sent this ema il._ >>>> >>>> >>>> >>>> _Heiko >>>> >>>> Quoting Heiko Zuerker <he...@zu... >>>> <mailto:he...@zu...>>:_ >>>> >>>> >>>> >>>>> _They changes are in CVS. I don't think I'll be able t o >>>>> upload the nightly compile for at leat a few days. I'l l >>>>> get it done as soon as I can. >>>>> >>>>> Heiko >>>>> >>>>> Quoting Heiko Zuerker <he...@zu... >>>>> <mailto:he...@zu...>>:_ >>>>> >>>>>> _Hey >>>>>> >>>>>> I'm hoping to get a chance on Saturday to work on the >>>>>> missing components. Stay tuned for further updates & >>>>>> sorry for being so slow. >>>>>> >>>>>> Heiko >>>>>> >>>>>> Quoting Ma poubelle <the...@gm... >>>>>> <mailto:the...@gm...>>:_ >>>>>> >>>>>>> _Hi Heiko, _ >>>>>>> _ _ >>>>>>> _All the crm_... binaries is installed and work. _ >>>>>>> _ _ >>>>>>> _My request is about the crm from crmsh . The shell >>>>>>> to interactively configure HA. >>>>>>> https://github.com/ClusterLabs/crmsh >>>>>>> <https://github.com/ClusterLabs/crmsh>_ >>>>>>> _ _ >>>>>>> _And other tools I like to use is pcs >>>>>>> (Pacemaker/Corosync configuration system) >>>>>>> https://github.com/ClusterLabs/pcs >>>>>>> <https://github.com/ClusterLabs/pcs>_ >>>>>>> _ _ >>>>>>> _Can you integrate them on new rc ?_ >>>>>>> _ _ >>>>>>> _Kind Regards_ >>>>>>> _ _ >>>>>>> _ _ >>>>>>> >>>>>>> _2016-08-28 15:39 GMT+02:00 Heiko Zuerker >>>>>>> <he...@zu... <mailto:he...@zu...>>:_ >>>>>>> >>>>>>> __Hey, >>>>>>> >>>>>>> I looked into this and all the crm binaries are >>>>>>> there and corosync & pacemaker started for me. >>>>>>> Do you have a specific error message you can sha re? >>>>>>> Did you start with a vanilla config or are you >>>>>>> upgrading something? >>>>>>> >>>>>>> Heiko >>>>>>> >>>>>>> Quoting Heiko Zuerker <he...@zu... >>>>>>> <mailto:he...@zu...>>:__ >>>>>>> >>>>>>>> __Hi, >>>>>>>> >>>>>>>> I won't get a chance to look into this until th e >>>>>>>> weekend. >>>>>>>> >>>>>>>> Heiko >>>>>>>> >>>>>>>> Quoting Ma poubelle <the...@gm... >>>>>>>> <mailto:the...@gm...>>:__ >>>>>>>> >>>>>>>>> __Hi, >>>>>>>>> __ >>>>>>>>> __I use the 1.8.0-rc2-2016-08-13-x86_64__ >>>>>>>>> >>>>>>>>> __I just try to start a cluster using corosync >>>>>>>>> and pacemaker and i stop my test , cannot find >>>>>>>>> the crm binary ! >>>>>>>>> __ >>>>>>>>> __Kind Regards__ >>>>>>>>> >>>>>>>>> >>>>>>>>> __ __ >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> __-- >>>>>>>> >>>>>>>> Regards >>>>>>>> Heiko Zuerker >>>>>>>> __ >>>>>>> >>>>>>> _ _ >>>>>>> >>>>>>> __-- >>>>>>> >>>>>>> Regards >>>>>>> Heiko Zuerker >>>>>>> __ >>>>>>> >>>>>>> __---------------------------------------------- -------------------------------- >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Devil-linux-discuss mailing list >>>>>>> Dev...@li... >>>>>>> <mailto:Dev...@li... t> >>>>>>> https://lists.sourceforge.net/lists/listinfo/dev il-linux-discuss >>>>>>> <https://lists.sourceforge.net/lists/listinfo/de vil-linux-discuss>_ >>>>>>> _ >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> _-- >>>>>> >>>>>> Regards >>>>>> Heiko Zuerker >>>>>> _ >>>>> >>>>> >>>>> >>>>> _-- >>>>> >>>>> Regards >>>>> Heiko Zuerker >>>>> _ >>>> >>>> >>>> >>>> _-- >>>> >>>> Regards >>>> Heiko Zuerker >>>> _ >>>> >>>> _------------------------------------------------------ ------------------------ >>>> >>>> _______________________________________________ >>>> Devil-linux-discuss mailing list >>>> Dev...@li... >>>> <mailto:Dev...@li...> >>>> https://lists.sourceforge.net/lists/listinfo/devil-linu x-discuss >>>> <https://lists.sourceforge.net/lists/listinfo/devil-lin ux-discuss>_ >>>> >>>> >>> >>> >>> >>> -- >>> >>> Regards >>> Heiko Zuerker >>> >> >> >> >> -- >> >> Regards >> Heiko Zuerker >> > > > > -- > > Regards > Heiko Zuerker > > > -------------------------------------------------------------- ---------------- > Check out the vibrant tech community on one of the world's mos t > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > Devil-linux-discuss mailing list > Dev...@li... > <mailto:Dev...@li...> > https://lists.sourceforge.net/lists/listinfo/devil-linux-discu ss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-disc uss> > > > > > ------------------------------------------------------------------ ------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > > > > _______________________________________________ > Devil-linux-discuss mailing list > Dev...@li... > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > -- - cameron miller - Manager, Network and Systems Administration - http://staff.adams.edu/~cdmiller |
|
From: cdmiller <cdm...@ad...> - 2016-10-28 04:18:10
|
Duh, I see it under devel. On 10/27/2016 09:22 PM, cdmiller wrote: > How do I get to the testing directory? > > Had to switch to 1.8.0rc1 in production due to Intel X540-AT2 card > being very bad under 1.6.9 and need to switch to corosync pacemaker > from heartbeat. > > Thanks, > > - cameron > > On 10/20/2016 09:31 AM, Ma poubelle wrote: >> Hi Heiko, >> >> I currently testing the corosync & pacemaker. I don't have anymore >> error message when using crm & pcs. But my testing is not finish. >> >> I keep you informed when done. >> >> Kind Regards >> >> Christian >> >> 2016-10-15 15:42 GMT+02:00 Heiko Zuerker <he...@zu... >> <mailto:he...@zu...>>: >> >> __ >> >> Christian, >> >> Did you get a chance to test if it works now? >> >> >> >> Heiko >> >> Quoting Heiko Zuerker <he...@zu... >> <mailto:he...@zu...>>: >> >>> Christian, >>> >>> The latest build is uploading now to the testing directory. >>> It should be complete about 30 minutes after I sent this emai > l. >>> >>> Heiko >>> >>> Quoting Heiko Zuerker <he...@zu... >>> <mailto:he...@zu...>>: >>> >>>> Christian, >>>> >>>> All the missing python modules are now included. >>>> This turned out to be a bit more complicated, since I had to >>>> make some significant changes to how python modules get >>>> included. The new solution is much more flexible and will >>>> make it a lot easier to add python modules. (similar to how >>>> perl is handled). >>>> >>>> I'll upload a new testing release in the next couple of days > . >>>> >>>> Heiko >>>> >>>> Quoting Ma poubelle <the...@gm... >>>> <mailto:the...@gm...>>: >>>> >>>>> Hello Heiko, >>>>> >>>>> Thanks for the update. We approach the goal. >>>>> >>>>> I think that misses some Python modules >>>>> >>>>> When I launch crm I get the following output >>>>> >>>>> >>>>> root@DL1:~ # crm >>>>> Fatal error: >>>>> No module named lxml >>>>> No module named modules >>>>> >>>>> Failed to start crmsh! This is likely due to a broken >>>>> installation or a missing dependency. >>>>> >>>>> If you are using a packaged version of crmsh, please tr > y >>>>> reinstalling the package. Also check your PYTHONPATH an > d >>>>> make sure that the crmsh module is reachable. >>>>> >>>>> Please file an issue describing your installation at >>>>> https://github.com/Clusterlabs/crmsh/issues/ >>>>> <https://github.com/Clusterlabs/crmsh/issues/> . >>>>> root@DL1:~ # >>>>> >>>>> >>>>> And when I launch pcs : >>>>> >>>>> root@DL1:~ # pcs >>>>> Traceback (most recent call last): >>>>> File "/usr/sbin/pcs", line 9, in <module> >>>>> load_entry_point('pcs==0.9.153', 'console_scripts', 'pc > s')() >>>>> File >>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py > ", line >>>>> 519, in load_entry_point >>>>> return get_distribution(dist).load_entry_point(group, n > ame) >>>>> File >>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py > ", line >>>>> 2630, in load_entry_point >>>>> return ep.load() >>>>> File >>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py > ", line >>>>> 2310, in load >>>>> return self.resolve() >>>>> File >>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py > ", line >>>>> 2316, in resolve >>>>> module = __import__(self.module_name, >>>>> fromlist=['__name__'], level=0) >>>>> File "/usr/lib/python2.7/site-packages/pcs/app.py", line >>>>> 14, in <module> >>>>> from pcs import ( >>>>> File "/usr/lib/python2.7/site-packages/pcs/acl.py", line >>>>> 10, in <module> >>>>> from pcs import ( >>>>> File "/usr/lib/python2.7/site-packages/pcs/prop.py", line >>>>> 13, in <module> >>>>> from pcs import utils >>>>> File "/usr/lib/python2.7/site-packages/pcs/utils.py", lin > e >>>>> 65, in <module> >>>>> from pcs.lib.env import LibraryEnvironment >>>>> File "/usr/lib/python2.7/site-packages/pcs/lib/env.py", >>>>> line 8, in <module> >>>>> from lxml import etree >>>>> ImportError: No module named lxml >>>>> root@DL1:~ # >>>>> >>>>> Regards >>>>> >>>>> Christian >>>>> >>>>> >>>>> 2016-09-24 14:24 GMT+02:00 Heiko Zuerker <he...@zu... >>>>> <mailto:he...@zu...>>: >>>>> >>>>> _Sorry for the delay. The latest build is uploading now > . >>>>> It should be done ~1 hour from the time I sent this ema > il._ >>>>> >>>>> >>>>> >>>>> _Heiko >>>>> >>>>> Quoting Heiko Zuerker <he...@zu... >>>>> <mailto:he...@zu...>>:_ >>>>> >>>>> >>>>> >>>>>> _They changes are in CVS. I don't think I'll be able t > o >>>>>> upload the nightly compile for at leat a few days. I'l > l >>>>>> get it done as soon as I can. >>>>>> >>>>>> Heiko >>>>>> >>>>>> Quoting Heiko Zuerker <he...@zu... >>>>>> <mailto:he...@zu...>>:_ >>>>>> >>>>>>> _Hey >>>>>>> >>>>>>> I'm hoping to get a chance on Saturday to work on the >>>>>>> missing components. Stay tuned for further updates & >>>>>>> sorry for being so slow. >>>>>>> >>>>>>> Heiko >>>>>>> >>>>>>> Quoting Ma poubelle <the...@gm... >>>>>>> <mailto:the...@gm...>>:_ >>>>>>> >>>>>>>> _Hi Heiko, _ >>>>>>>> _ _ >>>>>>>> _All the crm_... binaries is installed and work. _ >>>>>>>> _ _ >>>>>>>> _My request is about the crm from crmsh . The shell >>>>>>>> to interactively configure HA. >>>>>>>> https://github.com/ClusterLabs/crmsh >>>>>>>> <https://github.com/ClusterLabs/crmsh>_ >>>>>>>> _ _ >>>>>>>> _And other tools I like to use is pcs >>>>>>>> (Pacemaker/Corosync configuration system) >>>>>>>> https://github.com/ClusterLabs/pcs >>>>>>>> <https://github.com/ClusterLabs/pcs>_ >>>>>>>> _ _ >>>>>>>> _Can you integrate them on new rc ?_ >>>>>>>> _ _ >>>>>>>> _Kind Regards_ >>>>>>>> _ _ >>>>>>>> _ _ >>>>>>>> >>>>>>>> _2016-08-28 15:39 GMT+02:00 Heiko Zuerker >>>>>>>> <he...@zu... <mailto:he...@zu...>>:_ >>>>>>>> >>>>>>>> __Hey, >>>>>>>> >>>>>>>> I looked into this and all the crm binaries are >>>>>>>> there and corosync & pacemaker started for me. >>>>>>>> Do you have a specific error message you can sha > re? >>>>>>>> Did you start with a vanilla config or are you >>>>>>>> upgrading something? >>>>>>>> >>>>>>>> Heiko >>>>>>>> >>>>>>>> Quoting Heiko Zuerker <he...@zu... >>>>>>>> <mailto:he...@zu...>>:__ >>>>>>>> >>>>>>>>> __Hi, >>>>>>>>> >>>>>>>>> I won't get a chance to look into this until th > e >>>>>>>>> weekend. >>>>>>>>> >>>>>>>>> Heiko >>>>>>>>> >>>>>>>>> Quoting Ma poubelle <the...@gm... >>>>>>>>> <mailto:the...@gm...>>:__ >>>>>>>>> >>>>>>>>>> __Hi, >>>>>>>>>> __ >>>>>>>>>> __I use the 1.8.0-rc2-2016-08-13-x86_64__ >>>>>>>>>> >>>>>>>>>> __I just try to start a cluster using corosync >>>>>>>>>> and pacemaker and i stop my test , cannot find >>>>>>>>>> the crm binary ! >>>>>>>>>> __ >>>>>>>>>> __Kind Regards__ >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> __ __ >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> __-- >>>>>>>>> >>>>>>>>> Regards >>>>>>>>> Heiko Zuerker >>>>>>>>> __ >>>>>>>> >>>>>>>> _ _ >>>>>>>> >>>>>>>> __-- >>>>>>>> >>>>>>>> Regards >>>>>>>> Heiko Zuerker >>>>>>>> __ >>>>>>>> >>>>>>>> __---------------------------------------------- > -------------------------------- >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Devil-linux-discuss mailing list >>>>>>>> Dev...@li... >>>>>>>> <mailto:Dev...@li... > t> >>>>>>>> https://lists.sourceforge.net/lists/listinfo/dev > il-linux-discuss >>>>>>>> <https://lists.sourceforge.net/lists/listinfo/de > vil-linux-discuss>_ >>>>>>>> _ >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> _-- >>>>>>> >>>>>>> Regards >>>>>>> Heiko Zuerker >>>>>>> _ >>>>>> >>>>>> >>>>>> >>>>>> _-- >>>>>> >>>>>> Regards >>>>>> Heiko Zuerker >>>>>> _ >>>>> >>>>> >>>>> >>>>> _-- >>>>> >>>>> Regards >>>>> Heiko Zuerker >>>>> _ >>>>> >>>>> _------------------------------------------------------ > ------------------------ >>>>> >>>>> _______________________________________________ >>>>> Devil-linux-discuss mailing list >>>>> Dev...@li... >>>>> <mailto:Dev...@li...> >>>>> https://lists.sourceforge.net/lists/listinfo/devil-linu > x-discuss >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-lin > ux-discuss>_ >>>>> >>>>> >>>> >>>> >>>> >>>> -- >>>> >>>> Regards >>>> Heiko Zuerker >>>> >>> >>> >>> >>> -- >>> >>> Regards >>> Heiko Zuerker >>> >> >> >> >> -- >> >> Regards >> Heiko Zuerker >> >> >> -------------------------------------------------------------- > ---------------- >> Check out the vibrant tech community on one of the world's mos > t >> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >> _______________________________________________ >> Devil-linux-discuss mailing list >> Dev...@li... >> <mailto:Dev...@li...> >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discu > ss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-disc > uss> >> >> >> >> >> ------------------------------------------------------------------ > ------------ >> Check out the vibrant tech community on one of the world's most >> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >> >> >> >> _______________________________________________ >> Devil-linux-discuss mailing list >> Dev...@li... >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> > > -- - cameron miller - Manager, Network and Systems Administration - http://staff.adams.edu/~cdmiller |
|
From: Frank W. <Fra...@cg...> - 2016-11-08 14:00:45
Attachments:
smime.p7s
|
Hi Christian, I try to get started with corosync/pacemaker on DL, but I get the following kind of error: root@tunnelconcentrator:~ # pcs cluster auth pcmk-1 pcmk-2 No such file or directory Error: unable to locate command: /usr/bin/ruby root@tunnelconcentrator:~ # cat /etc/Devil-release Devil-Linux 1.8.0-rc2-2016-10-06-x86_64 I am familiar with heartbeat cluster on earlier devil-linux releases but I can't figure out how to get started here. Thanks and regards Frank On 2016-10-20 17:31, Ma poubelle wrote: > Hi Heiko, > > I currently testing the corosync & pacemaker. I don't have anymore > error message when using crm & pcs. But my testing is not finish. > > I keep you informed when done. > > Kind Regards > > Christian > > 2016-10-15 15:42 GMT+02:00 Heiko Zuerker <he...@zu... > <mailto:he...@zu...>>: > > Christian, > > Did you get a chance to test if it works now? > > > > Heiko > > Quoting Heiko Zuerker <he...@zu... <mailto:he...@zu...>>: >> >> Christian, >> >> The latest build is uploading now to the testing directory. >> It should be complete about 30 minutes after I sent this email. >> >> Heiko >> >> Quoting Heiko Zuerker <he...@zu... <mailto:he...@zu...>>: >> >>> Christian, >>> >>> All the missing python modules are now included. >>> This turned out to be a bit more complicated, since I had to >>> make some significant changes to how python modules get >>> included. The new solution is much more flexible and will make >>> it a lot easier to add python modules. (similar to how perl is >>> handled). >>> >>> I'll upload a new testing release in the next couple of days. >>> >>> Heiko >>> >>> Quoting Ma poubelle <the...@gm... >>> <mailto:the...@gm...>>: >>> >>>> Hello Heiko, >>>> >>>> Thanks for the update. We approach the goal. >>>> >>>> I think that misses some Python modules >>>> >>>> When I launch crm I get the following output >>>> >>>> >>>> root@DL1:~ # crm >>>> Fatal error: >>>> No module named lxml >>>> No module named modules >>>> >>>> Failed to start crmsh! This is likely due to a broken >>>> installation or a missing dependency. >>>> >>>> If you are using a packaged version of crmsh, please try >>>> reinstalling the package. Also check your PYTHONPATH and >>>> make sure that the crmsh module is reachable. >>>> >>>> Please file an issue describing your installation at >>>> https://github.com/Clusterlabs/crmsh/issues/ >>>> <https://github.com/Clusterlabs/crmsh/issues/> . >>>> root@DL1:~ # >>>> >>>> >>>> And when I launch pcs : >>>> >>>> root@DL1:~ # pcs >>>> Traceback (most recent call last): >>>> File "/usr/sbin/pcs", line 9, in <module> >>>> load_entry_point('pcs==0.9.153', 'console_scripts', 'pcs')() >>>> File >>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>> line 519, in load_entry_point >>>> return get_distribution(dist).load_entry_point(group, name) >>>> File >>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>> line 2630, in load_entry_point >>>> return ep.load() >>>> File >>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>> line 2310, in load >>>> return self.resolve() >>>> File >>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>> line 2316, in resolve >>>> module = __import__(self.module_name, >>>> fromlist=['__name__'], level=0) >>>> File "/usr/lib/python2.7/site-packages/pcs/app.py", line 14, >>>> in <module> >>>> from pcs import ( >>>> File "/usr/lib/python2.7/site-packages/pcs/acl.py", line 10, >>>> in <module> >>>> from pcs import ( >>>> File "/usr/lib/python2.7/site-packages/pcs/prop.py", line 13, >>>> in <module> >>>> from pcs import utils >>>> File "/usr/lib/python2.7/site-packages/pcs/utils.py", line >>>> 65, in <module> >>>> from pcs.lib.env import LibraryEnvironment >>>> File "/usr/lib/python2.7/site-packages/pcs/lib/env.py", line >>>> 8, in <module> >>>> from lxml import etree >>>> ImportError: No module named lxml >>>> root@DL1:~ # >>>> >>>> Regards >>>> >>>> Christian >>>> >>>> >>>> 2016-09-24 14:24 GMT+02:00 Heiko Zuerker <he...@zu... >>>> <mailto:he...@zu...>>: >>>> >>>> _Sorry for the delay. The latest build is uploading now. >>>> It should be done ~1 hour from the time I sent this email._ >>>> >>>> >>>> >>>> _Heiko >>>> >>>> Quoting Heiko Zuerker <he...@zu... >>>> <mailto:he...@zu...>>:_ >>>> >>>> >>>> >>>>> _They changes are in CVS. I don't think I'll be able to >>>>> upload the nightly compile for at leat a few days. I'll >>>>> get it done as soon as I can. >>>>> >>>>> Heiko >>>>> >>>>> Quoting Heiko Zuerker <he...@zu... >>>>> <mailto:he...@zu...>>:_ >>>>> >>>>>> _Hey >>>>>> >>>>>> I'm hoping to get a chance on Saturday to work on the >>>>>> missing components. Stay tuned for further updates & >>>>>> sorry for being so slow. >>>>>> >>>>>> Heiko >>>>>> >>>>>> Quoting Ma poubelle <the...@gm... >>>>>> <mailto:the...@gm...>>:_ >>>>>> >>>>>>> _Hi Heiko, _ >>>>>>> _ _ >>>>>>> _All the crm_... binaries is installed and work. _ >>>>>>> _ _ >>>>>>> _My request is about the crm from crmsh . The shell to >>>>>>> interactively configure HA. >>>>>>> https://github.com/ClusterLabs/crmsh >>>>>>> <https://github.com/ClusterLabs/crmsh>_ >>>>>>> _ _ >>>>>>> _And other tools I like to use is pcs >>>>>>> (Pacemaker/Corosync configuration system) >>>>>>> https://github.com/ClusterLabs/pcs >>>>>>> <https://github.com/ClusterLabs/pcs>_ >>>>>>> _ _ >>>>>>> _Can you integrate them on new rc ?_ >>>>>>> _ _ >>>>>>> _Kind Regards_ >>>>>>> _ _ >>>>>>> _ _ >>>>>>> >>>>>>> _2016-08-28 15:39 GMT+02:00 Heiko Zuerker >>>>>>> <he...@zu... <mailto:he...@zu...>>:_ >>>>>>> >>>>>>> __Hey, >>>>>>> >>>>>>> I looked into this and all the crm binaries are >>>>>>> there and corosync & pacemaker started for me. >>>>>>> Do you have a specific error message you can share? >>>>>>> Did you start with a vanilla config or are you >>>>>>> upgrading something? >>>>>>> >>>>>>> Heiko >>>>>>> >>>>>>> Quoting Heiko Zuerker <he...@zu... >>>>>>> <mailto:he...@zu...>>:__ >>>>>>> >>>>>>>> __Hi, >>>>>>>> >>>>>>>> I won't get a chance to look into this until the >>>>>>>> weekend. >>>>>>>> >>>>>>>> Heiko >>>>>>>> >>>>>>>> Quoting Ma poubelle <the...@gm... >>>>>>>> <mailto:the...@gm...>>:__ >>>>>>>> >>>>>>>>> __Hi, >>>>>>>>> __ >>>>>>>>> __I use the 1.8.0-rc2-2016-08-13-x86_64__ >>>>>>>>> >>>>>>>>> __I just try to start a cluster using corosync and >>>>>>>>> pacemaker and i stop my test , cannot find the crm >>>>>>>>> binary ! >>>>>>>>> __ >>>>>>>>> __Kind Regards__ >>>>>>>>> >>>>>>>>> >>>>>>>>> __ __ >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> __-- >>>>>>>> >>>>>>>> Regards >>>>>>>> Heiko Zuerker >>>>>>>> __ >>>>>>> >>>>>>> _ _ >>>>>>> >>>>>>> __-- >>>>>>> >>>>>>> Regards >>>>>>> Heiko Zuerker >>>>>>> __ >>>>>>> >>>>>>> __------------------------------------------------------------------------------ >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Devil-linux-discuss mailing list >>>>>>> Dev...@li... >>>>>>> <mailto:Dev...@li...> >>>>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>_ >>>>>>> _ >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> _-- >>>>>> >>>>>> Regards >>>>>> Heiko Zuerker >>>>>> _ >>>>> >>>>> >>>>> >>>>> _-- >>>>> >>>>> Regards >>>>> Heiko Zuerker >>>>> _ >>>> >>>> >>>> >>>> _-- >>>> >>>> Regards >>>> Heiko Zuerker >>>> _ >>>> >>>> _------------------------------------------------------------------------------ >>>> >>>> _______________________________________________ >>>> Devil-linux-discuss mailing list >>>> Dev...@li... >>>> <mailto:Dev...@li...> >>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>_ >>>> >>>> >>> >>> >>> >>> -- >>> >>> Regards >>> Heiko Zuerker >>> >> >> >> >> -- >> >> Regards >> Heiko Zuerker >> > > > > -- > > Regards > Heiko Zuerker > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > Devil-linux-discuss mailing list > Dev...@li... > <mailto:Dev...@li...> > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> > > > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > > > _______________________________________________ > Devil-linux-discuss mailing list > Dev...@li... > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss -- *Frank Weis* Conseiller informaticien LE GOUVERNEMENT DU GRAND-DUCHÉ DE LUXEMBOURG Ministère de l’Éducation nationale, de l’Enfance et de la Jeunesse Centre de gestion informatique de l’éducation eduPôle - Walferdange Route de Diekirch, L-7220 Walferdange _Adresse postale_ : B.P. 98, L-7201 Bereldange Tél. : (+352) 247-85973 . Fax : (+352) 247-85174 E-mail : Fra...@cg... <mailto:Fra...@cg...> www.cgie.lu <http://www.cgie.lu/> www.men.lu <http://www.men.lu/> www.gouvernement.lu <http://www.gouvernement.lu> Ce message et toutes pièces jointes sont établis à l'intention exclusive de ses destinataires. Ils peuvent contenir des informations confidentielles. Si vous recevez ce message par erreur, merci de le détruire et d'en avertir immédiatement l'expéditeur. Toute utilisation de ce message non conforme à sa destination, toute diffusion ou toute publication, totale ou partielle, est interdite, sauf autorisation expresse. Ce message a fait l'objet d'un traitement anti-virus. Le contenu de ce message et des pièces jointes ne pourrait engager la responsabilité du ministère que s'il a été émis par une personne dûment habilitée agissant dans le strict cadre des fonctions auxquelles elle est employée et à des fins non étrangères à ses attributions. |
|
From: Heiko Z. <he...@zu...> - 2016-11-12 13:55:27
|
All, Sounds like PCS needs ruby, which is not included in DL. I really don't want to add that to DL. Can we get away without PCS? Heiko Quoting Frank Weis <Fra...@cg...>: > Hi Christian, > > I try to get started with corosync/pacemaker on DL, but I get the > following kind of error: > > root@tunnelconcentrator:~ # pcs cluster auth pcmk-1 pcmk-2 > No such file or directory > Error: unable to locate command: /usr/bin/ruby > root@tunnelconcentrator:~ # cat /etc/Devil-release > Devil-Linux 1.8.0-rc2-2016-10-06-x86_64 > > I am familiar with heartbeat cluster on earlier devil-linux > releases but I can't figure out how to get started here. > > Thanks and regards > > Frank > > On 2016-10-20 17:31, Ma poubelle wrote: > >> Hi Heiko, >> I currently testing the corosync & pacemaker. I don't have >> anymore error message when using crm & pcs. But my testing is not >> finish. >> >> I keep you informed when done. >> >> Kind Regards >> >> Christian >> >> >> 2016-10-15 15:42 GMT+02:00 Heiko Zuerker <he...@zu...>: >> >>> Christian, >>> >>> Did you get a chance to test if it works now? >>> >>> >>> Heiko >>> >>> Quoting Heiko Zuerker <he...@zu...>: >>> >>> >>>> Christian, >>>> >>>> The latest build is uploading now to the testing directory. >>>> It should be complete about 30 minutes after I sent this email. >>>> >>>> Heiko >>>> >>>> Quoting Heiko Zuerker <he...@zu...>: >>>> >>>>> Christian, >>>>> >>>>> All the missing python modules are now included. >>>>> This turned out to be a bit more complicated, since I had to >>>>> make some significant changes to how python modules get >>>>> included. The new solution is much more flexible and will make >>>>> it a lot easier to add python modules. (similar to how perl is >>>>> handled). >>>>> >>>>> I'll upload a new testing release in the next couple of days. >>>>> >>>>> Heiko >>>>> >>>>> Quoting Ma poubelle <the...@gm...>: >>>>> >>>>>> Hello Heiko, >>>>>> >>>>>> Thanks for the update. We approach the goal. >>>>>> >>>>>> I think that misses some Python modules >>>>>> >>>>>> When I launch crm I get the following output >>>>>> >>>>>> >>>>>> root@DL1:~ # crm >>>>>> Fatal error: >>>>>> No module named lxml >>>>>> No module named modules >>>>>> >>>>>> Failed to start crmsh! This is likely due to a broken >>>>>> installation or a missing dependency. >>>>>> >>>>>> If you are using a packaged version of crmsh, >>>>>> please try >>>>>> reinstalling the package. Also check your >>>>>> PYTHONPATH and >>>>>> make sure that the crmsh module is reachable. >>>>>> >>>>>> Please file an issue describing your installation at >>>>>> https://github.com/Clusterlabs/crmsh/issues/ . >>>>>> root@DL1:~ # >>>>>> >>>>>> >>>>>> And when I launch pcs : >>>>>> >>>>>> root@DL1:~ # pcs >>>>>> Traceback (most recent call last): >>>>>> File "/usr/sbin/pcs", line 9, in <module> >>>>>> load_entry_point('pcs==0.9.153', >>>>>> 'console_scripts', 'pcs')() >>>>>> File >>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>>> line 519, in load_entry_point >>>>>> return >>>>>> get_distribution(dist).load_entry_point(group, name) >>>>>> File >>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>>> line 2630, in load_entry_point >>>>>> return ep.load() >>>>>> File >>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>>> line 2310, in load >>>>>> return self.resolve() >>>>>> File >>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>>> line 2316, in resolve >>>>>> module = __import__(self.module_name, >>>>>> fromlist=['__name__'], level=0) >>>>>> File >>>>>> "/usr/lib/python2.7/site-packages/pcs/app.py", line 14, in >>>>>> <module> >>>>>> from pcs import ( >>>>>> File >>>>>> "/usr/lib/python2.7/site-packages/pcs/acl.py", line 10, in >>>>>> <module> >>>>>> from pcs import ( >>>>>> File >>>>>> "/usr/lib/python2.7/site-packages/pcs/prop.py", line 13, in >>>>>> <module> >>>>>> from pcs import utils >>>>>> File >>>>>> "/usr/lib/python2.7/site-packages/pcs/utils.py", line 65, in >>>>>> <module> >>>>>> from pcs.lib.env import LibraryEnvironment >>>>>> File >>>>>> "/usr/lib/python2.7/site-packages/pcs/lib/env.py", line 8, in >>>>>> <module> >>>>>> from lxml import etree >>>>>> ImportError: No module named lxml >>>>>> root@DL1:~ # >>>>>> >>>>>> Regards >>>>>> >>>>>> Christian >>>>>> >>>>>> >>>>>> >>>>>> 2016-09-24 14:24 GMT+02:00 Heiko Zuerker >>>>>> <he...@zu...>: >>>>>> >>>>>>> _Sorry for the delay. The latest build is uploading now. >>>>>>> It should be done ~1 hour from the time I sent this email._ >>>>>>> >>>>>>> >>>>>>> _Heiko >>>>>>> >>>>>>> Quoting Heiko Zuerker <he...@zu...>:_ >>>>>>> >>>>>>> >>>>>>> >>>>>>>> _They changes are in CVS. I don't think I'll be able to >>>>>>>> upload the nightly compile for at leat a few days. I'll get >>>>>>>> it done as soon as I can. >>>>>>>> >>>>>>>> Heiko >>>>>>>> >>>>>>>> Quoting Heiko Zuerker <he...@zu...>:_ >>>>>>>> >>>>>>>>> _Hey >>>>>>>>> >>>>>>>>> I'm hoping to get a chance on Saturday to work on the >>>>>>>>> missing components. Stay tuned for further updates & sorry >>>>>>>>> for being so slow. >>>>>>>>> >>>>>>>>> Heiko >>>>>>>>> >>>>>>>>> Quoting Ma poubelle <the...@gm...>:_ >>>>>>>>> >>>>>>>>>> _Hi Heiko, _ _ _ >>>>>>>>>> _All the crm_... binaries is >>>>>>>>>> installed and work. _ >>>>>>>>>> _ _ >>>>>>>>>> _My request is about the crm from >>>>>>>>>> crmsh . The shell to interactively configure HA. >>>>>>>>>> https://github.com/ClusterLabs/crmsh_ >>>>>>>>>> _ _ >>>>>>>>>> _And other tools I like to use is pcs >>>>>>>>>> (Pacemaker/Corosync configuration system) >>>>>>>>>> https://github.com/ClusterLabs/pcs_ >>>>>>>>>> _ _ >>>>>>>>>> _Can you integrate them on new rc ?_ >>>>>>>>>> _ _ >>>>>>>>>> _Kind Regards_ >>>>>>>>>> _ _ >>>>>>>>>> _ _ >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> _2016-08-28 15:39 GMT+02:00 Heiko >>>>>>>>>> Zuerker <he...@zu...>:_ >>>>>>>>>> >>>>>>>>>>> __Hey, >>>>>>>>>>> >>>>>>>>>>> I looked into this and all the crm binaries are there and >>>>>>>>>>> corosync & pacemaker started for me. >>>>>>>>>>> Do you have a specific error message you can share? >>>>>>>>>>> Did you start with a vanilla config or are you upgrading something? >>>>>>>>>>> >>>>>>>>>>> Heiko >>>>>>>>>>> >>>>>>>>>>> Quoting Heiko Zuerker <he...@zu...>:__ >>>>>>>>>>> >>>>>>>>>>>> __Hi, >>>>>>>>>>>> >>>>>>>>>>>> I won't get a chance to look into this until the weekend. >>>>>>>>>>>> >>>>>>>>>>>> Heiko >>>>>>>>>>>> >>>>>>>>>>>> Quoting Ma poubelle <the...@gm...>:__ >>>>>>>>>>>> >>>>>>>>>>>>> __Hi, >>>>>>>>>>>>> __ >>>>>>>>>>>>> __I use the 1.8.0-rc2-2016-08-13-x86_64__ >>>>>>>>>>>>> >>>>>>>>>>>>> __I just try to start a cluster using corosync and >>>>>>>>>>>>> pacemaker and i stop my test , cannot find the crm >>>>>>>>>>>>> binary ! >>>>>>>>>>>>> __ >>>>>>>>>>>>> __Kind Regards__ >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> __ __ >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> __-- >>>>>>>>>>>> >>>>>>>>>>>> Regards >>>>>>>>>>>> Heiko Zuerker >>>>>>>>>>>> __ >>>>>>>>>>> >>>>>>>>>>> _ _ >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> __-- >>>>>>>>>>> >>>>>>>>>>> Regards >>>>>>>>>>> Heiko Zuerker >>>>>>>>>>> __ >>>>>>>>>>> >>>>>>>>>>> __------------------------------------------------------------------------------ >>>>>>>>>>> >>>>>>>>>>> _______________________________________________ >>>>>>>>>>> Devil-linux-discuss mailing list >>>>>>>>>>> Dev...@li... >>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss_ >>>>>>>>>>> _ >>>>>>>>> >>>>>>>>> >>>>>>>>> _-- >>>>>>>>> >>>>>>>>> Regards >>>>>>>>> Heiko Zuerker >>>>>>>>> _ >>>>>>>> >>>>>>>> >>>>>>>> _-- >>>>>>>> >>>>>>>> Regards >>>>>>>> Heiko Zuerker >>>>>>>> _ >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> _-- >>>>>>> >>>>>>> Regards >>>>>>> Heiko Zuerker >>>>>>> _ >>>>>>> >>>>>>> _------------------------------------------------------------------------------ >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Devil-linux-discuss mailing list >>>>>>> Dev...@li... >>>>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss_ >>>>>>> >>>>> >>>>> >>>>> -- >>>>> >>>>> Regards >>>>> Heiko Zuerker >>>>> >>>> >>>> >>>> -- >>>> >>>> Regards >>>> Heiko Zuerker >>>> >>> >>> >>> >>> >>> -- >>> >>> Regards >>> Heiko Zuerker >>> >>> >>> ------------------------------------------------------------------------------ >>> Check out the vibrant tech community on one of the world's most >>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >>> _______________________________________________ >>> Devil-linux-discuss mailing list >>> Dev...@li... >>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>> >> >> >> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! >> http://sdm.link/slashdot >> >> _______________________________________________ Devil-linux-discuss >> mailing list >> Dev...@li...://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > > -- > > FRANK WEIS > Conseiller informaticien > > LE GOUVERNEMENT DU GRAND-DUCHÉ DE LUXEMBOURG > Ministère de l’Éducation nationale, de l’Enfance et de la Jeunesse > Centre de gestion informatique de l’éducation > > eduPôle - Walferdange > Route de Diekirch, L-7220 Walferdange > _Adresse postale_ : B.P. 98, L-7201 Bereldange > > Tél. : (+352) 247-85973 . Fax : (+352) 247-85174 > E-mail : Fra...@cg... > www.cgie.lu[1] > www.men.lu[2] > www.gouvernement.lu[3] > > Ce message et toutes pièces jointes sont établis à l'intention > exclusive de ses destinataires. Ils peuvent contenir des > informations confidentielles. Si vous recevez ce message par erreur, > merci de le détruire et d'en avertir immédiatement l'expéditeur. > Toute utilisation de ce message non conforme à sa destination, toute > diffusion ou toute publication, totale ou partielle, est interdite, > sauf autorisation expresse. Ce message a fait l'objet d'un > traitement anti-virus. > > Le contenu de ce message et des pièces jointes ne pourrait engager > la responsabilité du ministère que s'il a été émis par une personne > dûment habilitée agissant dans le strict cadre des fonctions > auxquelles elle est employée et à des fins non étrangères à ses > attributions. > Links: ------ [1] http://www.cgie.lu/ [2] http://www.men.lu/ [3] http://www.gouvernement.lu -- Regards Heiko Zuerker |
|
From: Heiko Z. <he...@zu...> - 2016-11-23 19:48:57
|
All, Thoughts on this? I'd like to get to a point to finally releasing DL 1.8 and this is the last open item. Heiko Quoting Heiko Zuerker <he...@zu...>: > All, > > Sounds like PCS needs ruby, which is not included in DL. > I really don't want to add that to DL. Can we get away without PCS? > > Heiko > > Quoting Frank Weis <Fra...@cg...>: > >> Hi Christian, >> >> I try to get started with corosync/pacemaker on DL, but I get >> the following kind of error: >> >> root@tunnelconcentrator:~ # pcs cluster auth pcmk-1 pcmk-2 >> No such file or directory >> Error: unable to locate command: /usr/bin/ruby >> root@tunnelconcentrator:~ # cat /etc/Devil-release >> Devil-Linux 1.8.0-rc2-2016-10-06-x86_64 >> >> I am familiar with heartbeat cluster on earlier devil-linux >> releases but I can't figure out how to get started here. >> >> Thanks and regards >> >> Frank >> >> On 2016-10-20 17:31, Ma poubelle wrote: >> >>> Hi Heiko, >>> I currently testing the corosync & pacemaker. I don't have >>> anymore error message when using crm & pcs. But my testing is not >>> finish. >>> >>> I keep you informed when done. >>> >>> Kind Regards >>> >>> Christian >>> >>> >>> 2016-10-15 15:42 GMT+02:00 Heiko Zuerker <he...@zu...>: >>> >>>> Christian, >>>> >>>> Did you get a chance to test if it works now? >>>> >>>> >>>> Heiko >>>> >>>> Quoting Heiko Zuerker <he...@zu...>: >>>> >>>> >>>>> Christian, >>>>> >>>>> The latest build is uploading now to the testing directory. >>>>> It should be complete about 30 minutes after I sent this email. >>>>> >>>>> Heiko >>>>> >>>>> Quoting Heiko Zuerker <he...@zu...>: >>>>> >>>>>> Christian, >>>>>> >>>>>> All the missing python modules are now included. >>>>>> This turned out to be a bit more complicated, since I had to >>>>>> make some significant changes to how python modules get >>>>>> included. The new solution is much more flexible and will make >>>>>> it a lot easier to add python modules. (similar to how perl is >>>>>> handled). >>>>>> >>>>>> I'll upload a new testing release in the next couple of days. >>>>>> >>>>>> Heiko >>>>>> >>>>>> Quoting Ma poubelle <the...@gm...>: >>>>>> >>>>>>> Hello Heiko, >>>>>>> >>>>>>> Thanks for the update. We approach the goal. >>>>>>> >>>>>>> I think that misses some Python modules >>>>>>> >>>>>>> When I launch crm I get the following output >>>>>>> >>>>>>> >>>>>>> root@DL1:~ # crm >>>>>>> Fatal error: >>>>>>> No module named lxml >>>>>>> No module named modules >>>>>>> >>>>>>> Failed to start crmsh! This is likely due to a broken >>>>>>> installation or a missing dependency. >>>>>>> >>>>>>> If you are using a packaged version of >>>>>>> crmsh, please try >>>>>>> reinstalling the package. Also check your >>>>>>> PYTHONPATH and >>>>>>> make sure that the crmsh module is reachable. >>>>>>> >>>>>>> Please file an issue describing your installation at >>>>>>> https://github.com/Clusterlabs/crmsh/issues/ . >>>>>>> root@DL1:~ # >>>>>>> >>>>>>> >>>>>>> And when I launch pcs : >>>>>>> >>>>>>> root@DL1:~ # pcs >>>>>>> Traceback (most recent call last): >>>>>>> File "/usr/sbin/pcs", line 9, in <module> >>>>>>> load_entry_point('pcs==0.9.153', >>>>>>> 'console_scripts', 'pcs')() >>>>>>> File >>>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>>>> line 519, in load_entry_point >>>>>>> return >>>>>>> get_distribution(dist).load_entry_point(group, name) >>>>>>> File >>>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>>>> line 2630, in load_entry_point >>>>>>> return ep.load() >>>>>>> File >>>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>>>> line 2310, in load >>>>>>> return self.resolve() >>>>>>> File >>>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>>>> line 2316, in resolve >>>>>>> module = __import__(self.module_name, >>>>>>> fromlist=['__name__'], level=0) >>>>>>> File >>>>>>> "/usr/lib/python2.7/site-packages/pcs/app.py", line 14, in >>>>>>> <module> >>>>>>> from pcs import ( >>>>>>> File >>>>>>> "/usr/lib/python2.7/site-packages/pcs/acl.py", line 10, in >>>>>>> <module> >>>>>>> from pcs import ( >>>>>>> File >>>>>>> "/usr/lib/python2.7/site-packages/pcs/prop.py", line 13, in >>>>>>> <module> >>>>>>> from pcs import utils >>>>>>> File >>>>>>> "/usr/lib/python2.7/site-packages/pcs/utils.py", line 65, in >>>>>>> <module> >>>>>>> from pcs.lib.env import LibraryEnvironment >>>>>>> File >>>>>>> "/usr/lib/python2.7/site-packages/pcs/lib/env.py", line 8, in >>>>>>> <module> >>>>>>> from lxml import etree >>>>>>> ImportError: No module named lxml >>>>>>> root@DL1:~ # >>>>>>> >>>>>>> Regards >>>>>>> >>>>>>> Christian >>>>>>> >>>>>>> >>>>>>> >>>>>>> 2016-09-24 14:24 GMT+02:00 Heiko Zuerker >>>>>>> <he...@zu...>: >>>>>>> >>>>>>>> _Sorry for the delay. The latest build is uploading now. >>>>>>>> It should be done ~1 hour from the time I sent this email._ >>>>>>>> >>>>>>>> >>>>>>>> _Heiko >>>>>>>> >>>>>>>> Quoting Heiko Zuerker <he...@zu...>:_ >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> _They changes are in CVS. I don't think I'll be able to >>>>>>>>> upload the nightly compile for at leat a few days. I'll get >>>>>>>>> it done as soon as I can. >>>>>>>>> >>>>>>>>> Heiko >>>>>>>>> >>>>>>>>> Quoting Heiko Zuerker <he...@zu...>:_ >>>>>>>>> >>>>>>>>>> _Hey >>>>>>>>>> >>>>>>>>>> I'm hoping to get a chance on Saturday to work on the >>>>>>>>>> missing components. Stay tuned for further updates & sorry >>>>>>>>>> for being so slow. >>>>>>>>>> >>>>>>>>>> Heiko >>>>>>>>>> >>>>>>>>>> Quoting Ma poubelle <the...@gm...>:_ >>>>>>>>>> >>>>>>>>>>> _Hi Heiko, _ _ _ >>>>>>>>>>> _All the crm_... binaries is >>>>>>>>>>> installed and work. _ >>>>>>>>>>> _ _ >>>>>>>>>>> _My request is about the crm from >>>>>>>>>>> crmsh . The shell to interactively configure HA. >>>>>>>>>>> https://github.com/ClusterLabs/crmsh_ >>>>>>>>>>> _ _ >>>>>>>>>>> _And other tools I like to use is >>>>>>>>>>> pcs (Pacemaker/Corosync configuration system) >>>>>>>>>>> https://github.com/ClusterLabs/pcs_ >>>>>>>>>>> _ _ >>>>>>>>>>> _Can you integrate them on new rc ?_ >>>>>>>>>>> _ _ >>>>>>>>>>> _Kind Regards_ >>>>>>>>>>> _ _ >>>>>>>>>>> _ _ >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> _2016-08-28 15:39 GMT+02:00 Heiko >>>>>>>>>>> Zuerker <he...@zu...>:_ >>>>>>>>>>> >>>>>>>>>>>> __Hey, >>>>>>>>>>>> >>>>>>>>>>>> I looked into this and all the crm binaries are there and >>>>>>>>>>>> corosync & pacemaker started for me. >>>>>>>>>>>> Do you have a specific error message you can share? >>>>>>>>>>>> Did you start with a vanilla config or are you upgrading >>>>>>>>>>>> something? >>>>>>>>>>>> >>>>>>>>>>>> Heiko >>>>>>>>>>>> >>>>>>>>>>>> Quoting Heiko Zuerker <he...@zu...>:__ >>>>>>>>>>>> >>>>>>>>>>>>> __Hi, >>>>>>>>>>>>> >>>>>>>>>>>>> I won't get a chance to look into this until the weekend. >>>>>>>>>>>>> >>>>>>>>>>>>> Heiko >>>>>>>>>>>>> >>>>>>>>>>>>> Quoting Ma poubelle <the...@gm...>:__ >>>>>>>>>>>>> >>>>>>>>>>>>>> __Hi, >>>>>>>>>>>>>> __ >>>>>>>>>>>>>> __I use the 1.8.0-rc2-2016-08-13-x86_64__ >>>>>>>>>>>>>> >>>>>>>>>>>>>> __I just try to start a cluster using corosync and >>>>>>>>>>>>>> pacemaker and i stop my test , cannot find the crm >>>>>>>>>>>>>> binary ! >>>>>>>>>>>>>> __ >>>>>>>>>>>>>> __Kind Regards__ >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> __ __ >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> __-- >>>>>>>>>>>>> >>>>>>>>>>>>> Regards >>>>>>>>>>>>> Heiko Zuerker >>>>>>>>>>>>> __ >>>>>>>>>>>> >>>>>>>>>>>> _ _ >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> __-- >>>>>>>>>>>> >>>>>>>>>>>> Regards >>>>>>>>>>>> Heiko Zuerker >>>>>>>>>>>> __ >>>>>>>>>>>> >>>>>>>>>>>> __------------------------------------------------------------------------------ >>>>>>>>>>>> >>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>> Devil-linux-discuss mailing list >>>>>>>>>>>> Dev...@li... >>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss_ >>>>>>>>>>>> _ >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> _-- >>>>>>>>>> >>>>>>>>>> Regards >>>>>>>>>> Heiko Zuerker >>>>>>>>>> _ >>>>>>>>> >>>>>>>>> >>>>>>>>> _-- >>>>>>>>> >>>>>>>>> Regards >>>>>>>>> Heiko Zuerker >>>>>>>>> _ >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> _-- >>>>>>>> >>>>>>>> Regards >>>>>>>> Heiko Zuerker >>>>>>>> _ >>>>>>>> >>>>>>>> _------------------------------------------------------------------------------ >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Devil-linux-discuss mailing list >>>>>>>> Dev...@li... >>>>>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss_ >>>>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> >>>>>> Regards >>>>>> Heiko Zuerker >>>>>> >>>>> >>>>> >>>>> -- >>>>> >>>>> Regards >>>>> Heiko Zuerker >>>>> >>>> >>>> >>>> >>>> >>>> -- >>>> >>>> Regards >>>> Heiko Zuerker >>>> >>>> >>>> ------------------------------------------------------------------------------ >>>> Check out the vibrant tech community on one of the world's most >>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >>>> _______________________________________________ >>>> Devil-linux-discuss mailing list >>>> Dev...@li... >>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>> >>> >>> >>> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! >>> http://sdm.link/slashdot >>> >>> _______________________________________________ >>> Devil-linux-discuss mailing list >>> Dev...@li...://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> >> -- >> >> FRANK WEIS >> Conseiller informaticien >> >> LE GOUVERNEMENT DU GRAND-DUCHÉ DE LUXEMBOURG >> Ministère de l’Éducation nationale, de l’Enfance et de la Jeunesse >> Centre de gestion informatique de l’éducation >> >> eduPôle - Walferdange >> Route de Diekirch, L-7220 Walferdange >> _Adresse postale_ : B.P. 98, L-7201 Bereldange >> >> Tél. : (+352) 247-85973 . Fax : (+352) 247-85174 >> E-mail : Fra...@cg... >> www.cgie.lu[1] >> www.men.lu[2] >> www.gouvernement.lu[3] >> >> Ce message et toutes pièces jointes sont établis à l'intention >> exclusive de ses destinataires. Ils peuvent contenir des >> informations confidentielles. Si vous recevez ce message par >> erreur, merci de le détruire et d'en avertir immédiatement >> l'expéditeur. Toute utilisation de ce message non conforme à sa >> destination, toute diffusion ou toute publication, totale ou >> partielle, est interdite, sauf autorisation expresse. Ce message a >> fait l'objet d'un traitement anti-virus. >> >> Le contenu de ce message et des pièces jointes ne pourrait engager >> la responsabilité du ministère que s'il a été émis par une personne >> dûment habilitée agissant dans le strict cadre des fonctions >> auxquelles elle est employée et à des fins non étrangères à ses >> attributions. >> > > > -- > > Regards > Heiko Zuerker > Links: ------ [1] http://www.cgie.lu/ [2] http://www.men.lu/ [3] http://www.gouvernement.lu -- Regards Heiko Zuerker |
|
From: cdmiller <cdm...@ad...> - 2016-11-28 23:24:23
|
Of corosync/pacemaker I have only used crm, not pcs. My understanding is crm only relies on python. http://crmsh.nongnu.org/faq.html Bottom of the old heartbeat page has a pararaph on crm and pcs: http://www.linux-ha.org/wiki/Configuration - cameron On 11/23/2016 12:48 PM, Heiko Zuerker wrote: > All, > > Thoughts on this? I'd like to get to a point to finally releasing DL > 1.8 and this is the last open item. > > Heiko > > Quoting Heiko Zuerker <he...@zu... <mailto:he...@zu...>>: > >> All, >> >> Sounds like PCS needs ruby, which is not included in DL. >> I really don't want to add that to DL. Can we get away without PCS? >> >> Heiko >> >> Quoting Frank Weis <Fra...@cg... <mailto:Fra...@cg...>>: >> >>> Hi Christian, >>> >>> I try to get started with corosync/pacemaker on DL, but I get the >>> following kind of error: >>> >>> root@tunnelconcentrator:~ # pcs cluster auth pcmk-1 pcmk-2 >>> No such file or directory >>> Error: unable to locate command: /usr/bin/ruby >>> root@tunnelconcentrator:~ # cat /etc/Devil-release >>> Devil-Linux 1.8.0-rc2-2016-10-06-x86_64 >>> >>> I am familiar with heartbeat cluster on earlier devil-linux >>> releases but I can't figure out how to get started here. >>> >>> Thanks and regards >>> >>> Frank >>> >>> >>> On 2016-10-20 17:31, Ma poubelle wrote: >>>> Hi Heiko, >>>> >>>> I currently testing the corosync & pacemaker. I don't have >>>> anymore error message when using crm & pcs. But my testing is >>>> not finish. >>>> >>>> I keep you informed when done. >>>> >>>> Kind Regards >>>> >>>> Christian >>>> >>>> 2016-10-15 15:42 GMT+02:00 Heiko Zuerker <he...@zu... >>>> <mailto:he...@zu...>>: >>>> >>>> Christian, >>>> >>>> Did you get a chance to test if it works now? >>>> >>>> >>>> >>>> Heiko >>>> >>>> Quoting Heiko Zuerker <he...@zu... >>>> <mailto:he...@zu...>>: >>>>> >>>>> Christian, >>>>> >>>>> The latest build is uploading now to the testing directory. >>>>> It should be complete about 30 minutes after I sent this email. >>>>> >>>>> Heiko >>>>> >>>>> Quoting Heiko Zuerker <he...@zu... >>>>> <mailto:he...@zu...>>: >>>>> >>>>>> Christian, >>>>>> >>>>>> All the missing python modules are now included. >>>>>> This turned out to be a bit more complicated, since I had >>>>>> to make some significant changes to how python modules get >>>>>> included. The new solution is much more flexible and will >>>>>> make it a lot easier to add python modules. (similar to >>>>>> how perl is handled). >>>>>> >>>>>> I'll upload a new testing release in the next couple of days. >>>>>> >>>>>> Heiko >>>>>> >>>>>> Quoting Ma poubelle <the...@gm... >>>>>> <mailto:the...@gm...>>: >>>>>> >>>>>>> Hello Heiko, >>>>>>> >>>>>>> Thanks for the update. We approach the goal. >>>>>>> >>>>>>> I think that misses some Python modules >>>>>>> >>>>>>> When I launch crm I get the following output >>>>>>> >>>>>>> >>>>>>> root@DL1:~ # crm >>>>>>> Fatal error: >>>>>>> No module named lxml >>>>>>> No module named modules >>>>>>> >>>>>>> Failed to start crmsh! This is likely due to a broken >>>>>>> installation or a missing dependency. >>>>>>> >>>>>>> If you are using a packaged version of crmsh, please try >>>>>>> reinstalling the package. Also check your PYTHONPATH and >>>>>>> make sure that the crmsh module is reachable. >>>>>>> >>>>>>> Please file an issue describing your installation at >>>>>>> https://github.com/Clusterlabs/crmsh/issues/ >>>>>>> <https://github.com/Clusterlabs/crmsh/issues/> . >>>>>>> root@DL1:~ # >>>>>>> >>>>>>> >>>>>>> And when I launch pcs : >>>>>>> >>>>>>> root@DL1:~ # pcs >>>>>>> Traceback (most recent call last): >>>>>>> File "/usr/sbin/pcs", line 9, in <module> >>>>>>> load_entry_point('pcs==0.9.153', 'console_scripts', >>>>>>> 'pcs')() >>>>>>> File >>>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>>>> line 519, in load_entry_point >>>>>>> return get_distribution(dist).load_entry_point(group, >>>>>>> name) >>>>>>> File >>>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>>>> line 2630, in load_entry_point >>>>>>> return ep.load() >>>>>>> File >>>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>>>> line 2310, in load >>>>>>> return self.resolve() >>>>>>> File >>>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>>>> line 2316, in resolve >>>>>>> module = __import__(self.module_name, >>>>>>> fromlist=['__name__'], level=0) >>>>>>> File "/usr/lib/python2.7/site-packages/pcs/app.py", >>>>>>> line 14, in <module> >>>>>>> from pcs import ( >>>>>>> File "/usr/lib/python2.7/site-packages/pcs/acl.py", >>>>>>> line 10, in <module> >>>>>>> from pcs import ( >>>>>>> File "/usr/lib/python2.7/site-packages/pcs/prop.py", >>>>>>> line 13, in <module> >>>>>>> from pcs import utils >>>>>>> File "/usr/lib/python2.7/site-packages/pcs/utils.py", >>>>>>> line 65, in <module> >>>>>>> from pcs.lib.env import LibraryEnvironment >>>>>>> File "/usr/lib/python2.7/site-packages/pcs/lib/env.py", >>>>>>> line 8, in <module> >>>>>>> from lxml import etree >>>>>>> ImportError: No module named lxml >>>>>>> root@DL1:~ # >>>>>>> >>>>>>> Regards >>>>>>> >>>>>>> Christian >>>>>>> >>>>>>> >>>>>>> 2016-09-24 14:24 GMT+02:00 Heiko Zuerker >>>>>>> <he...@zu... <mailto:he...@zu...>>: >>>>>>> >>>>>>> _Sorry for the delay. The latest build is uploading now. >>>>>>> It should be done ~1 hour from the time I sent this >>>>>>> email._ >>>>>>> >>>>>>> >>>>>>> >>>>>>> _Heiko >>>>>>> >>>>>>> Quoting Heiko Zuerker <he...@zu... >>>>>>> <mailto:he...@zu...>>:_ >>>>>>> >>>>>>> >>>>>>> >>>>>>>> _They changes are in CVS. I don't think I'll be able >>>>>>>> to upload the nightly compile for at leat a few >>>>>>>> days. I'll get it done as soon as I can. >>>>>>>> >>>>>>>> Heiko >>>>>>>> >>>>>>>> Quoting Heiko Zuerker <he...@zu... >>>>>>>> <mailto:he...@zu...>>:_ >>>>>>>> >>>>>>>>> _Hey >>>>>>>>> >>>>>>>>> I'm hoping to get a chance on Saturday to work on >>>>>>>>> the missing components. Stay tuned for further >>>>>>>>> updates & sorry for being so slow. >>>>>>>>> >>>>>>>>> Heiko >>>>>>>>> >>>>>>>>> Quoting Ma poubelle <the...@gm... >>>>>>>>> <mailto:the...@gm...>>:_ >>>>>>>>> >>>>>>>>>> _Hi Heiko, _ >>>>>>>>>> _ _ >>>>>>>>>> _All the crm_... binaries is installed and work. _ >>>>>>>>>> _ _ >>>>>>>>>> _My request is about the crm from crmsh . The >>>>>>>>>> shell to interactively configure HA. >>>>>>>>>> https://github.com/ClusterLabs/crmsh >>>>>>>>>> <https://github.com/ClusterLabs/crmsh>_ >>>>>>>>>> _ _ >>>>>>>>>> _And other tools I like to use is pcs >>>>>>>>>> (Pacemaker/Corosync configuration system) >>>>>>>>>> https://github.com/ClusterLabs/pcs >>>>>>>>>> <https://github.com/ClusterLabs/pcs>_ >>>>>>>>>> _ _ >>>>>>>>>> _Can you integrate them on new rc ?_ >>>>>>>>>> _ _ >>>>>>>>>> _Kind Regards_ >>>>>>>>>> _ _ >>>>>>>>>> _ _ >>>>>>>>>> >>>>>>>>>> _2016-08-28 15:39 GMT+02:00 Heiko Zuerker >>>>>>>>>> <he...@zu... <mailto:he...@zu...>>:_ >>>>>>>>>> >>>>>>>>>> __Hey, >>>>>>>>>> >>>>>>>>>> I looked into this and all the crm binaries >>>>>>>>>> are there and corosync & pacemaker started for me. >>>>>>>>>> Do you have a specific error message you can >>>>>>>>>> share? >>>>>>>>>> Did you start with a vanilla config or are you >>>>>>>>>> upgrading something? >>>>>>>>>> >>>>>>>>>> Heiko >>>>>>>>>> >>>>>>>>>> Quoting Heiko Zuerker <he...@zu... >>>>>>>>>> <mailto:he...@zu...>>:__ >>>>>>>>>> >>>>>>>>>>> __Hi, >>>>>>>>>>> >>>>>>>>>>> I won't get a chance to look into this until >>>>>>>>>>> the weekend. >>>>>>>>>>> >>>>>>>>>>> Heiko >>>>>>>>>>> >>>>>>>>>>> Quoting Ma poubelle <the...@gm... >>>>>>>>>>> <mailto:the...@gm...>>:__ >>>>>>>>>>> >>>>>>>>>>>> __Hi, >>>>>>>>>>>> __ >>>>>>>>>>>> __I use the 1.8.0-rc2-2016-08-13-x86_64__ >>>>>>>>>>>> >>>>>>>>>>>> __I just try to start a cluster using >>>>>>>>>>>> corosync and pacemaker and i stop my test , >>>>>>>>>>>> cannot find the crm binary ! >>>>>>>>>>>> __ >>>>>>>>>>>> __Kind Regards__ >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> __ __ >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> __-- >>>>>>>>>>> >>>>>>>>>>> Regards >>>>>>>>>>> Heiko Zuerker >>>>>>>>>>> __ >>>>>>>>>> >>>>>>>>>> _ _ >>>>>>>>>> >>>>>>>>>> __-- >>>>>>>>>> >>>>>>>>>> Regards >>>>>>>>>> Heiko Zuerker >>>>>>>>>> __ >>>>>>>>>> >>>>>>>>>> __------------------------------------------------------------------------------ >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> Devil-linux-discuss mailing list >>>>>>>>>> Dev...@li... >>>>>>>>>> <mailto:Dev...@li...> >>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>>>>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>_ >>>>>>>>>> _ >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> _-- >>>>>>>>> >>>>>>>>> Regards >>>>>>>>> Heiko Zuerker >>>>>>>>> _ >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> _-- >>>>>>>> >>>>>>>> Regards >>>>>>>> Heiko Zuerker >>>>>>>> _ >>>>>>> >>>>>>> >>>>>>> >>>>>>> _-- >>>>>>> >>>>>>> Regards >>>>>>> Heiko Zuerker >>>>>>> _ >>>>>>> >>>>>>> _------------------------------------------------------------------------------ >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Devil-linux-discuss mailing list >>>>>>> Dev...@li... >>>>>>> <mailto:Dev...@li...> >>>>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>_ >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> >>>>>> Regards >>>>>> Heiko Zuerker >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> >>>>> Regards >>>>> Heiko Zuerker >>>>> >>>> >>>> >>>> >>>> -- >>>> >>>> Regards >>>> Heiko Zuerker >>>> >>>> >>>> ------------------------------------------------------------------------------ >>>> Check out the vibrant tech community on one of the world's most >>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >>>> _______________________________________________ >>>> Devil-linux-discuss mailing list >>>> Dev...@li... >>>> <mailto:Dev...@li...> >>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>> >>>> >>>> >>>> >>>> ------------------------------------------------------------------------------ >>>> Check out the vibrant tech community on one of the world's most >>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >>>> >>>> >>>> _______________________________________________ >>>> Devil-linux-discuss mailing list >>>> Dev...@li... >>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>> >>> >>> -- >>> >>> *Frank Weis* >>> Conseiller informaticien >>> >>> LE GOUVERNEMENT DU GRAND-DUCHÉ DE LUXEMBOURG >>> Ministère de l’Éducation nationale, de l’Enfance et de la Jeunesse >>> Centre de gestion informatique de l’éducation >>> >>> eduPôle - Walferdange >>> Route de Diekirch, L-7220 Walferdange >>> _Adresse postale_ : B.P. 98, L-7201 Bereldange >>> >>> Tél. : (+352) 247-85973 . Fax : (+352) 247-85174 >>> E-mail : Fra...@cg... <mailto:Fra...@cg...> >>> www.cgie.lu <http://www.cgie.lu/> >>> www.men.lu <http://www.men.lu/> >>> www.gouvernement.lu <http://www.gouvernement.lu> >>> >>> Ce message et toutes pièces jointes sont établis à l'intention >>> exclusive de ses destinataires. Ils peuvent contenir des >>> informations confidentielles. Si vous recevez ce message par >>> erreur, merci de le détruire et d'en avertir immédiatement >>> l'expéditeur. Toute utilisation de ce message non conforme à sa >>> destination, toute diffusion ou toute publication, totale ou >>> partielle, est interdite, sauf autorisation expresse. Ce message >>> a fait l'objet d'un traitement anti-virus. >>> >>> Le contenu de ce message et des pièces jointes ne pourrait >>> engager la responsabilité du ministère que s'il a été émis par >>> une personne dûment habilitée agissant dans le strict cadre des >>> fonctions auxquelles elle est employée et à des fins non >>> étrangères à ses attributions. >>> >> >> >> >> -- >> >> Regards >> Heiko Zuerker >> > > > > -- > > Regards > Heiko Zuerker > > > > ------------------------------------------------------------------------------ > > > > _______________________________________________ > Devil-linux-discuss mailing list > Dev...@li... > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > -- - cameron miller - Manager, Network and Systems Administration - http://staff.adams.edu/~cdmiller |
|
From: Ma p. <the...@gm...> - 2016-11-29 13:41:19
|
Hello, Due to too much work, I have suspended the tests with DL. I just start again to setup a cluster using corosync and pacemaker. Following the last mail, I understand that we cannot use pcs but crm ! I hope to finish soon and we are happy to have a new release ... Regards 2016-11-29 0:24 GMT+01:00 cdmiller <cdm...@ad...>: > Of corosync/pacemaker I have only used crm, not pcs. My > understanding is crm only relies on python. > > http://crmsh.nongnu.org/faq.html > > Bottom of the old heartbeat page has a pararaph on crm and pcs: > http://www.linux-ha.org/wiki/Configuration > > - cameron > > On 11/23/2016 12:48 PM, Heiko Zuerker wrote: > > All, > > > > Thoughts on this? I'd like to get to a point to finally releasing DL > > 1.8 and this is the last open item. > > > > Heiko > > > > Quoting Heiko Zuerker <he...@zu... <mailto:he...@zu...>>: > > > >> All, > >> > >> Sounds like PCS needs ruby, which is not included in DL. > >> I really don't want to add that to DL. Can we get away without PCS? > >> > >> Heiko > >> > >> Quoting Frank Weis <Fra...@cg... <mailto:Fra...@cg...>>: > >> > >>> Hi Christian, > >>> > >>> I try to get started with corosync/pacemaker on DL, but I get the > >>> following kind of error: > >>> > >>> root@tunnelconcentrator:~ # pcs cluster auth pcmk-1 pcmk-2 > >>> No such file or directory > >>> Error: unable to locate command: /usr/bin/ruby > >>> root@tunnelconcentrator:~ # cat /etc/Devil-release > >>> Devil-Linux 1.8.0-rc2-2016-10-06-x86_64 > >>> > >>> I am familiar with heartbeat cluster on earlier devil-linux > >>> releases but I can't figure out how to get started here. > >>> > >>> Thanks and regards > >>> > >>> Frank > >>> > >>> > >>> On 2016-10-20 17:31, Ma poubelle wrote: > >>>> Hi Heiko, > >>>> > >>>> I currently testing the corosync & pacemaker. I don't have > >>>> anymore error message when using crm & pcs. But my testing is > >>>> not finish. > >>>> > >>>> I keep you informed when done. > >>>> > >>>> Kind Regards > >>>> > >>>> Christian > >>>> > >>>> 2016-10-15 15:42 GMT+02:00 Heiko Zuerker <he...@zu... > >>>> <mailto:he...@zu...>>: > >>>> > >>>> Christian, > >>>> > >>>> Did you get a chance to test if it works now? > >>>> > >>>> > >>>> > >>>> Heiko > >>>> > >>>> Quoting Heiko Zuerker <he...@zu... > >>>> <mailto:he...@zu...>>: > >>>>> > >>>>> Christian, > >>>>> > >>>>> The latest build is uploading now to the testing directory. > >>>>> It should be complete about 30 minutes after I sent this email. > >>>>> > >>>>> Heiko > >>>>> > >>>>> Quoting Heiko Zuerker <he...@zu... > >>>>> <mailto:he...@zu...>>: > >>>>> > >>>>>> Christian, > >>>>>> > >>>>>> All the missing python modules are now included. > >>>>>> This turned out to be a bit more complicated, since I had > >>>>>> to make some significant changes to how python modules get > >>>>>> included. The new solution is much more flexible and will > >>>>>> make it a lot easier to add python modules. (similar to > >>>>>> how perl is handled). > >>>>>> > >>>>>> I'll upload a new testing release in the next couple of days. > >>>>>> > >>>>>> Heiko > >>>>>> > >>>>>> Quoting Ma poubelle <the...@gm... > >>>>>> <mailto:the...@gm...>>: > >>>>>> > >>>>>>> Hello Heiko, > >>>>>>> > >>>>>>> Thanks for the update. We approach the goal. > >>>>>>> > >>>>>>> I think that misses some Python modules > >>>>>>> > >>>>>>> When I launch crm I get the following output > >>>>>>> > >>>>>>> > >>>>>>> root@DL1:~ # crm > >>>>>>> Fatal error: > >>>>>>> No module named lxml > >>>>>>> No module named modules > >>>>>>> > >>>>>>> Failed to start crmsh! This is likely due to a broken > >>>>>>> installation or a missing dependency. > >>>>>>> > >>>>>>> If you are using a packaged version of crmsh, please try > >>>>>>> reinstalling the package. Also check your PYTHONPATH and > >>>>>>> make sure that the crmsh module is reachable. > >>>>>>> > >>>>>>> Please file an issue describing your installation at > >>>>>>> https://github.com/Clusterlabs/crmsh/issues/ > >>>>>>> <https://github.com/Clusterlabs/crmsh/issues/> . > >>>>>>> root@DL1:~ # > >>>>>>> > >>>>>>> > >>>>>>> And when I launch pcs : > >>>>>>> > >>>>>>> root@DL1:~ # pcs > >>>>>>> Traceback (most recent call last): > >>>>>>> File "/usr/sbin/pcs", line 9, in <module> > >>>>>>> load_entry_point('pcs==0.9.153', 'console_scripts', > >>>>>>> 'pcs')() > >>>>>>> File > >>>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", > >>>>>>> line 519, in load_entry_point > >>>>>>> return get_distribution(dist).load_entry_point(group, > >>>>>>> name) > >>>>>>> File > >>>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", > >>>>>>> line 2630, in load_entry_point > >>>>>>> return ep.load() > >>>>>>> File > >>>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", > >>>>>>> line 2310, in load > >>>>>>> return self.resolve() > >>>>>>> File > >>>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", > >>>>>>> line 2316, in resolve > >>>>>>> module = __import__(self.module_name, > >>>>>>> fromlist=['__name__'], level=0) > >>>>>>> File "/usr/lib/python2.7/site-packages/pcs/app.py", > >>>>>>> line 14, in <module> > >>>>>>> from pcs import ( > >>>>>>> File "/usr/lib/python2.7/site-packages/pcs/acl.py", > >>>>>>> line 10, in <module> > >>>>>>> from pcs import ( > >>>>>>> File "/usr/lib/python2.7/site-packages/pcs/prop.py", > >>>>>>> line 13, in <module> > >>>>>>> from pcs import utils > >>>>>>> File "/usr/lib/python2.7/site-packages/pcs/utils.py", > >>>>>>> line 65, in <module> > >>>>>>> from pcs.lib.env import LibraryEnvironment > >>>>>>> File "/usr/lib/python2.7/site-packages/pcs/lib/env.py", > >>>>>>> line 8, in <module> > >>>>>>> from lxml import etree > >>>>>>> ImportError: No module named lxml > >>>>>>> root@DL1:~ # > >>>>>>> > >>>>>>> Regards > >>>>>>> > >>>>>>> Christian > >>>>>>> > >>>>>>> > >>>>>>> 2016-09-24 14:24 GMT+02:00 Heiko Zuerker > >>>>>>> <he...@zu... <mailto:he...@zu...>>: > >>>>>>> > >>>>>>> _Sorry for the delay. The latest build is uploading now. > >>>>>>> It should be done ~1 hour from the time I sent this > >>>>>>> email._ > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> _Heiko > >>>>>>> > >>>>>>> Quoting Heiko Zuerker <he...@zu... > >>>>>>> <mailto:he...@zu...>>:_ > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>>> _They changes are in CVS. I don't think I'll be able > >>>>>>>> to upload the nightly compile for at leat a few > >>>>>>>> days. I'll get it done as soon as I can. > >>>>>>>> > >>>>>>>> Heiko > >>>>>>>> > >>>>>>>> Quoting Heiko Zuerker <he...@zu... > >>>>>>>> <mailto:he...@zu...>>:_ > >>>>>>>> > >>>>>>>>> _Hey > >>>>>>>>> > >>>>>>>>> I'm hoping to get a chance on Saturday to work on > >>>>>>>>> the missing components. Stay tuned for further > >>>>>>>>> updates & sorry for being so slow. > >>>>>>>>> > >>>>>>>>> Heiko > >>>>>>>>> > >>>>>>>>> Quoting Ma poubelle <the...@gm... > >>>>>>>>> <mailto:the...@gm...>>:_ > >>>>>>>>> > >>>>>>>>>> _Hi Heiko, _ > >>>>>>>>>> _ _ > >>>>>>>>>> _All the crm_... binaries is installed and work. _ > >>>>>>>>>> _ _ > >>>>>>>>>> _My request is about the crm from crmsh . The > >>>>>>>>>> shell to interactively configure HA. > >>>>>>>>>> https://github.com/ClusterLabs/crmsh > >>>>>>>>>> <https://github.com/ClusterLabs/crmsh>_ > >>>>>>>>>> _ _ > >>>>>>>>>> _And other tools I like to use is pcs > >>>>>>>>>> (Pacemaker/Corosync configuration system) > >>>>>>>>>> https://github.com/ClusterLabs/pcs > >>>>>>>>>> <https://github.com/ClusterLabs/pcs>_ > >>>>>>>>>> _ _ > >>>>>>>>>> _Can you integrate them on new rc ?_ > >>>>>>>>>> _ _ > >>>>>>>>>> _Kind Regards_ > >>>>>>>>>> _ _ > >>>>>>>>>> _ _ > >>>>>>>>>> > >>>>>>>>>> _2016-08-28 15:39 GMT+02:00 Heiko Zuerker > >>>>>>>>>> <he...@zu... <mailto:he...@zu...>>:_ > >>>>>>>>>> > >>>>>>>>>> __Hey, > >>>>>>>>>> > >>>>>>>>>> I looked into this and all the crm binaries > >>>>>>>>>> are there and corosync & pacemaker started for me. > >>>>>>>>>> Do you have a specific error message you can > >>>>>>>>>> share? > >>>>>>>>>> Did you start with a vanilla config or are you > >>>>>>>>>> upgrading something? > >>>>>>>>>> > >>>>>>>>>> Heiko > >>>>>>>>>> > >>>>>>>>>> Quoting Heiko Zuerker <he...@zu... > >>>>>>>>>> <mailto:he...@zu...>>:__ > >>>>>>>>>> > >>>>>>>>>>> __Hi, > >>>>>>>>>>> > >>>>>>>>>>> I won't get a chance to look into this until > >>>>>>>>>>> the weekend. > >>>>>>>>>>> > >>>>>>>>>>> Heiko > >>>>>>>>>>> > >>>>>>>>>>> Quoting Ma poubelle <the...@gm... > >>>>>>>>>>> <mailto:the...@gm...>>:__ > >>>>>>>>>>> > >>>>>>>>>>>> __Hi, > >>>>>>>>>>>> __ > >>>>>>>>>>>> __I use the 1.8.0-rc2-2016-08-13-x86_64__ > >>>>>>>>>>>> > >>>>>>>>>>>> __I just try to start a cluster using > >>>>>>>>>>>> corosync and pacemaker and i stop my test , > >>>>>>>>>>>> cannot find the crm binary ! > >>>>>>>>>>>> __ > >>>>>>>>>>>> __Kind Regards__ > >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>> __ __ > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> __-- > >>>>>>>>>>> > >>>>>>>>>>> Regards > >>>>>>>>>>> Heiko Zuerker > >>>>>>>>>>> __ > >>>>>>>>>> > >>>>>>>>>> _ _ > >>>>>>>>>> > >>>>>>>>>> __-- > >>>>>>>>>> > >>>>>>>>>> Regards > >>>>>>>>>> Heiko Zuerker > >>>>>>>>>> __ > >>>>>>>>>> > >>>>>>>>>> __---------------------------- > -------------------------------------------------- > >>>>>>>>>> > >>>>>>>>>> _______________________________________________ > >>>>>>>>>> Devil-linux-discuss mailing list > >>>>>>>>>> Dev...@li... > >>>>>>>>>> <mailto:Dev...@li...> > >>>>>>>>>> https://lists.sourceforge.net/ > lists/listinfo/devil-linux-discuss > >>>>>>>>>> <https://lists.sourceforge. > net/lists/listinfo/devil-linux-discuss>_ > >>>>>>>>>> _ > >>>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> _-- > >>>>>>>>> > >>>>>>>>> Regards > >>>>>>>>> Heiko Zuerker > >>>>>>>>> _ > >>>>>>>> > >>>>>>>> > >>>>>>>> > >>>>>>>> _-- > >>>>>>>> > >>>>>>>> Regards > >>>>>>>> Heiko Zuerker > >>>>>>>> _ > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> _-- > >>>>>>> > >>>>>>> Regards > >>>>>>> Heiko Zuerker > >>>>>>> _ > >>>>>>> > >>>>>>> _----------------------------- > ------------------------------------------------- > >>>>>>> > >>>>>>> _______________________________________________ > >>>>>>> Devil-linux-discuss mailing list > >>>>>>> Dev...@li... > >>>>>>> <mailto:Dev...@li...> > >>>>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux- > discuss > >>>>>>> <https://lists.sourceforge.net/lists/listinfo/devil- > linux-discuss>_ > >>>>>>> > >>>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> -- > >>>>>> > >>>>>> Regards > >>>>>> Heiko Zuerker > >>>>>> > >>>>> > >>>>> > >>>>> > >>>>> -- > >>>>> > >>>>> Regards > >>>>> Heiko Zuerker > >>>>> > >>>> > >>>> > >>>> > >>>> -- > >>>> > >>>> Regards > >>>> Heiko Zuerker > >>>> > >>>> > >>>> ------------------------------------------------------------ > ------------------ > >>>> Check out the vibrant tech community on one of the world's most > >>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot > >>>> _______________________________________________ > >>>> Devil-linux-discuss mailing list > >>>> Dev...@li... > >>>> <mailto:Dev...@li...> > >>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > >>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > > > >>>> > >>>> > >>>> > >>>> > >>>> ------------------------------------------------------------ > ------------------ > >>>> Check out the vibrant tech community on one of the world's most > >>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot > >>>> > >>>> > >>>> _______________________________________________ > >>>> Devil-linux-discuss mailing list > >>>> Dev...@li... > >>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > >>>> > >>> > >>> -- > >>> > >>> *Frank Weis* > >>> Conseiller informaticien > >>> > >>> LE GOUVERNEMENT DU GRAND-DUCHÉ DE LUXEMBOURG > >>> Ministère de l’Éducation nationale, de l’Enfance et de la Jeunesse > >>> Centre de gestion informatique de l’éducation > >>> > >>> eduPôle - Walferdange > >>> Route de Diekirch, L-7220 Walferdange > >>> _Adresse postale_ : B.P. 98, L-7201 Bereldange > >>> > >>> Tél. : (+352) 247-85973 . Fax : (+352) 247-85174 > >>> E-mail : Fra...@cg... <mailto:Fra...@cg...> > >>> www.cgie.lu <http://www.cgie.lu/> > >>> www.men.lu <http://www.men.lu/> > >>> www.gouvernement.lu <http://www.gouvernement.lu> > >>> > >>> Ce message et toutes pièces jointes sont établis à l'intention > >>> exclusive de ses destinataires. Ils peuvent contenir des > >>> informations confidentielles. Si vous recevez ce message par > >>> erreur, merci de le détruire et d'en avertir immédiatement > >>> l'expéditeur. Toute utilisation de ce message non conforme à sa > >>> destination, toute diffusion ou toute publication, totale ou > >>> partielle, est interdite, sauf autorisation expresse. Ce message > >>> a fait l'objet d'un traitement anti-virus. > >>> > >>> Le contenu de ce message et des pièces jointes ne pourrait > >>> engager la responsabilité du ministère que s'il a été émis par > >>> une personne dûment habilitée agissant dans le strict cadre des > >>> fonctions auxquelles elle est employée et à des fins non > >>> étrangères à ses attributions. > >>> > >> > >> > >> > >> -- > >> > >> Regards > >> Heiko Zuerker > >> > > > > > > > > -- > > > > Regards > > Heiko Zuerker > > > > > > > > ------------------------------------------------------------ > ------------------ > > > > > > > > _______________________________________________ > > Devil-linux-discuss mailing list > > Dev...@li... > > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > > > > > -- > - cameron miller > - Manager, Network and Systems Administration > - http://staff.adams.edu/~cdmiller > > ------------------------------------------------------------ > ------------------ > _______________________________________________ > Devil-linux-discuss mailing list > Dev...@li... > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > |
|
From: Ma p. <the...@gm...> - 2016-11-29 17:40:30
|
Hello, First test, the corosync is working, and pacemaker start. crm is working, the first problem i see is that is missing some RA (ressources agent) located normally on /usr/lib/ocf/resources.d/heartbeat for me the missing files is IPaddr and IPaddr2 used to setup VIP ip address I continue tomorrow. Kind Regards 2016-11-29 14:41 GMT+01:00 Ma poubelle <the...@gm...>: > Hello, > > Due to too much work, I have suspended the tests with DL. > I just start again to setup a cluster using corosync and pacemaker. > Following the last mail, I understand that we cannot use pcs but crm ! > I hope to finish soon and we are happy to have a new release ... > Regards > > > 2016-11-29 0:24 GMT+01:00 cdmiller <cdm...@ad...>: > >> Of corosync/pacemaker I have only used crm, not pcs. My >> understanding is crm only relies on python. >> >> http://crmsh.nongnu.org/faq.html >> >> Bottom of the old heartbeat page has a pararaph on crm and pcs: >> http://www.linux-ha.org/wiki/Configuration >> >> - cameron >> >> On 11/23/2016 12:48 PM, Heiko Zuerker wrote: >> > All, >> > >> > Thoughts on this? I'd like to get to a point to finally releasing DL >> > 1.8 and this is the last open item. >> > >> > Heiko >> > >> > Quoting Heiko Zuerker <he...@zu... <mailto:he...@zu...>>: >> > >> >> All, >> >> >> >> Sounds like PCS needs ruby, which is not included in DL. >> >> I really don't want to add that to DL. Can we get away without PCS? >> >> >> >> Heiko >> >> >> >> Quoting Frank Weis <Fra...@cg... <mailto:Fra...@cg...>>: >> >> >> >>> Hi Christian, >> >>> >> >>> I try to get started with corosync/pacemaker on DL, but I get the >> >>> following kind of error: >> >>> >> >>> root@tunnelconcentrator:~ # pcs cluster auth pcmk-1 pcmk-2 >> >>> No such file or directory >> >>> Error: unable to locate command: /usr/bin/ruby >> >>> root@tunnelconcentrator:~ # cat /etc/Devil-release >> >>> Devil-Linux 1.8.0-rc2-2016-10-06-x86_64 >> >>> >> >>> I am familiar with heartbeat cluster on earlier devil-linux >> >>> releases but I can't figure out how to get started here. >> >>> >> >>> Thanks and regards >> >>> >> >>> Frank >> >>> >> >>> >> >>> On 2016-10-20 17:31, Ma poubelle wrote: >> >>>> Hi Heiko, >> >>>> >> >>>> I currently testing the corosync & pacemaker. I don't have >> >>>> anymore error message when using crm & pcs. But my testing is >> >>>> not finish. >> >>>> >> >>>> I keep you informed when done. >> >>>> >> >>>> Kind Regards >> >>>> >> >>>> Christian >> >>>> >> >>>> 2016-10-15 15:42 GMT+02:00 Heiko Zuerker <he...@zu... >> >>>> <mailto:he...@zu...>>: >> >>>> >> >>>> Christian, >> >>>> >> >>>> Did you get a chance to test if it works now? >> >>>> >> >>>> >> >>>> >> >>>> Heiko >> >>>> >> >>>> Quoting Heiko Zuerker <he...@zu... >> >>>> <mailto:he...@zu...>>: >> >>>>> >> >>>>> Christian, >> >>>>> >> >>>>> The latest build is uploading now to the testing directory. >> >>>>> It should be complete about 30 minutes after I sent this email. >> >>>>> >> >>>>> Heiko >> >>>>> >> >>>>> Quoting Heiko Zuerker <he...@zu... >> >>>>> <mailto:he...@zu...>>: >> >>>>> >> >>>>>> Christian, >> >>>>>> >> >>>>>> All the missing python modules are now included. >> >>>>>> This turned out to be a bit more complicated, since I had >> >>>>>> to make some significant changes to how python modules get >> >>>>>> included. The new solution is much more flexible and will >> >>>>>> make it a lot easier to add python modules. (similar to >> >>>>>> how perl is handled). >> >>>>>> >> >>>>>> I'll upload a new testing release in the next couple of days. >> >>>>>> >> >>>>>> Heiko >> >>>>>> >> >>>>>> Quoting Ma poubelle <the...@gm... >> >>>>>> <mailto:the...@gm...>>: >> >>>>>> >> >>>>>>> Hello Heiko, >> >>>>>>> >> >>>>>>> Thanks for the update. We approach the goal. >> >>>>>>> >> >>>>>>> I think that misses some Python modules >> >>>>>>> >> >>>>>>> When I launch crm I get the following output >> >>>>>>> >> >>>>>>> >> >>>>>>> root@DL1:~ # crm >> >>>>>>> Fatal error: >> >>>>>>> No module named lxml >> >>>>>>> No module named modules >> >>>>>>> >> >>>>>>> Failed to start crmsh! This is likely due to a broken >> >>>>>>> installation or a missing dependency. >> >>>>>>> >> >>>>>>> If you are using a packaged version of crmsh, please try >> >>>>>>> reinstalling the package. Also check your PYTHONPATH and >> >>>>>>> make sure that the crmsh module is reachable. >> >>>>>>> >> >>>>>>> Please file an issue describing your installation at >> >>>>>>> https://github.com/Clusterlabs/crmsh/issues/ >> >>>>>>> <https://github.com/Clusterlabs/crmsh/issues/> . >> >>>>>>> root@DL1:~ # >> >>>>>>> >> >>>>>>> >> >>>>>>> And when I launch pcs : >> >>>>>>> >> >>>>>>> root@DL1:~ # pcs >> >>>>>>> Traceback (most recent call last): >> >>>>>>> File "/usr/sbin/pcs", line 9, in <module> >> >>>>>>> load_entry_point('pcs==0.9.153', 'console_scripts', >> >>>>>>> 'pcs')() >> >>>>>>> File >> >>>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >> >>>>>>> line 519, in load_entry_point >> >>>>>>> return get_distribution(dist).load_entry_point(group, >> >>>>>>> name) >> >>>>>>> File >> >>>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >> >>>>>>> line 2630, in load_entry_point >> >>>>>>> return ep.load() >> >>>>>>> File >> >>>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >> >>>>>>> line 2310, in load >> >>>>>>> return self.resolve() >> >>>>>>> File >> >>>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >> >>>>>>> line 2316, in resolve >> >>>>>>> module = __import__(self.module_name, >> >>>>>>> fromlist=['__name__'], level=0) >> >>>>>>> File "/usr/lib/python2.7/site-packages/pcs/app.py", >> >>>>>>> line 14, in <module> >> >>>>>>> from pcs import ( >> >>>>>>> File "/usr/lib/python2.7/site-packages/pcs/acl.py", >> >>>>>>> line 10, in <module> >> >>>>>>> from pcs import ( >> >>>>>>> File "/usr/lib/python2.7/site-packages/pcs/prop.py", >> >>>>>>> line 13, in <module> >> >>>>>>> from pcs import utils >> >>>>>>> File "/usr/lib/python2.7/site-packages/pcs/utils.py", >> >>>>>>> line 65, in <module> >> >>>>>>> from pcs.lib.env import LibraryEnvironment >> >>>>>>> File "/usr/lib/python2.7/site-packages/pcs/lib/env.py", >> >>>>>>> line 8, in <module> >> >>>>>>> from lxml import etree >> >>>>>>> ImportError: No module named lxml >> >>>>>>> root@DL1:~ # >> >>>>>>> >> >>>>>>> Regards >> >>>>>>> >> >>>>>>> Christian >> >>>>>>> >> >>>>>>> >> >>>>>>> 2016-09-24 14:24 GMT+02:00 Heiko Zuerker >> >>>>>>> <he...@zu... <mailto:he...@zu...>>: >> >>>>>>> >> >>>>>>> _Sorry for the delay. The latest build is uploading now. >> >>>>>>> It should be done ~1 hour from the time I sent this >> >>>>>>> email._ >> >>>>>>> >> >>>>>>> >> >>>>>>> >> >>>>>>> _Heiko >> >>>>>>> >> >>>>>>> Quoting Heiko Zuerker <he...@zu... >> >>>>>>> <mailto:he...@zu...>>:_ >> >>>>>>> >> >>>>>>> >> >>>>>>> >> >>>>>>>> _They changes are in CVS. I don't think I'll be able >> >>>>>>>> to upload the nightly compile for at leat a few >> >>>>>>>> days. I'll get it done as soon as I can. >> >>>>>>>> >> >>>>>>>> Heiko >> >>>>>>>> >> >>>>>>>> Quoting Heiko Zuerker <he...@zu... >> >>>>>>>> <mailto:he...@zu...>>:_ >> >>>>>>>> >> >>>>>>>>> _Hey >> >>>>>>>>> >> >>>>>>>>> I'm hoping to get a chance on Saturday to work on >> >>>>>>>>> the missing components. Stay tuned for further >> >>>>>>>>> updates & sorry for being so slow. >> >>>>>>>>> >> >>>>>>>>> Heiko >> >>>>>>>>> >> >>>>>>>>> Quoting Ma poubelle <the...@gm... >> >>>>>>>>> <mailto:the...@gm...>>:_ >> >>>>>>>>> >> >>>>>>>>>> _Hi Heiko, _ >> >>>>>>>>>> _ _ >> >>>>>>>>>> _All the crm_... binaries is installed and work. _ >> >>>>>>>>>> _ _ >> >>>>>>>>>> _My request is about the crm from crmsh . The >> >>>>>>>>>> shell to interactively configure HA. >> >>>>>>>>>> https://github.com/ClusterLabs/crmsh >> >>>>>>>>>> <https://github.com/ClusterLabs/crmsh>_ >> >>>>>>>>>> _ _ >> >>>>>>>>>> _And other tools I like to use is pcs >> >>>>>>>>>> (Pacemaker/Corosync configuration system) >> >>>>>>>>>> https://github.com/ClusterLabs/pcs >> >>>>>>>>>> <https://github.com/ClusterLabs/pcs>_ >> >>>>>>>>>> _ _ >> >>>>>>>>>> _Can you integrate them on new rc ?_ >> >>>>>>>>>> _ _ >> >>>>>>>>>> _Kind Regards_ >> >>>>>>>>>> _ _ >> >>>>>>>>>> _ _ >> >>>>>>>>>> >> >>>>>>>>>> _2016-08-28 15:39 GMT+02:00 Heiko Zuerker >> >>>>>>>>>> <he...@zu... <mailto:he...@zu...>>:_ >> >>>>>>>>>> >> >>>>>>>>>> __Hey, >> >>>>>>>>>> >> >>>>>>>>>> I looked into this and all the crm binaries >> >>>>>>>>>> are there and corosync & pacemaker started for me. >> >>>>>>>>>> Do you have a specific error message you can >> >>>>>>>>>> share? >> >>>>>>>>>> Did you start with a vanilla config or are you >> >>>>>>>>>> upgrading something? >> >>>>>>>>>> >> >>>>>>>>>> Heiko >> >>>>>>>>>> >> >>>>>>>>>> Quoting Heiko Zuerker <he...@zu... >> >>>>>>>>>> <mailto:he...@zu...>>:__ >> >>>>>>>>>> >> >>>>>>>>>>> __Hi, >> >>>>>>>>>>> >> >>>>>>>>>>> I won't get a chance to look into this until >> >>>>>>>>>>> the weekend. >> >>>>>>>>>>> >> >>>>>>>>>>> Heiko >> >>>>>>>>>>> >> >>>>>>>>>>> Quoting Ma poubelle <the...@gm... >> >>>>>>>>>>> <mailto:the...@gm...>>:__ >> >>>>>>>>>>> >> >>>>>>>>>>>> __Hi, >> >>>>>>>>>>>> __ >> >>>>>>>>>>>> __I use the 1.8.0-rc2-2016-08-13-x86_64__ >> >>>>>>>>>>>> >> >>>>>>>>>>>> __I just try to start a cluster using >> >>>>>>>>>>>> corosync and pacemaker and i stop my test , >> >>>>>>>>>>>> cannot find the crm binary ! >> >>>>>>>>>>>> __ >> >>>>>>>>>>>> __Kind Regards__ >> >>>>>>>>>>>> >> >>>>>>>>>>>> >> >>>>>>>>>>>> __ __ >> >>>>>>>>>>> >> >>>>>>>>>>> >> >>>>>>>>>>> >> >>>>>>>>>>> __-- >> >>>>>>>>>>> >> >>>>>>>>>>> Regards >> >>>>>>>>>>> Heiko Zuerker >> >>>>>>>>>>> __ >> >>>>>>>>>> >> >>>>>>>>>> _ _ >> >>>>>>>>>> >> >>>>>>>>>> __-- >> >>>>>>>>>> >> >>>>>>>>>> Regards >> >>>>>>>>>> Heiko Zuerker >> >>>>>>>>>> __ >> >>>>>>>>>> >> >>>>>>>>>> __--------------------------- >> --------------------------------------------------- >> >>>>>>>>>> >> >>>>>>>>>> _______________________________________________ >> >>>>>>>>>> Devil-linux-discuss mailing list >> >>>>>>>>>> Dev...@li... >> >>>>>>>>>> <mailto:Dev...@li...> >> >>>>>>>>>> https://lists.sourceforge. >> net/lists/listinfo/devil-linux-discuss >> >>>>>>>>>> <https://lists.sourceforge.ne >> t/lists/listinfo/devil-linux-discuss>_ >> >>>>>>>>>> _ >> >>>>>>>>>> >> >>>>>>>>> >> >>>>>>>>> >> >>>>>>>>> >> >>>>>>>>> _-- >> >>>>>>>>> >> >>>>>>>>> Regards >> >>>>>>>>> Heiko Zuerker >> >>>>>>>>> _ >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> _-- >> >>>>>>>> >> >>>>>>>> Regards >> >>>>>>>> Heiko Zuerker >> >>>>>>>> _ >> >>>>>>> >> >>>>>>> >> >>>>>>> >> >>>>>>> _-- >> >>>>>>> >> >>>>>>> Regards >> >>>>>>> Heiko Zuerker >> >>>>>>> _ >> >>>>>>> >> >>>>>>> _---------------------------- >> -------------------------------------------------- >> >>>>>>> >> >>>>>>> _______________________________________________ >> >>>>>>> Devil-linux-discuss mailing list >> >>>>>>> Dev...@li... >> >>>>>>> <mailto:Dev...@li...> >> >>>>>>> https://lists.sourceforge.net/lists/listinfo/devil- >> linux-discuss >> >>>>>>> <https://lists.sourceforge.ne >> t/lists/listinfo/devil-linux-discuss>_ >> >>>>>>> >> >>>>>>> >> >>>>>> >> >>>>>> >> >>>>>> >> >>>>>> -- >> >>>>>> >> >>>>>> Regards >> >>>>>> Heiko Zuerker >> >>>>>> >> >>>>> >> >>>>> >> >>>>> >> >>>>> -- >> >>>>> >> >>>>> Regards >> >>>>> Heiko Zuerker >> >>>>> >> >>>> >> >>>> >> >>>> >> >>>> -- >> >>>> >> >>>> Regards >> >>>> Heiko Zuerker >> >>>> >> >>>> >> >>>> ----------------------------------------------------------- >> ------------------- >> >>>> Check out the vibrant tech community on one of the world's most >> >>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >> >>>> _______________________________________________ >> >>>> Devil-linux-discuss mailing list >> >>>> Dev...@li... >> >>>> <mailto:Dev...@li...> >> >>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> >>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux- >> discuss> >> >>>> >> >>>> >> >>>> >> >>>> >> >>>> ------------------------------------------------------------ >> ------------------ >> >>>> Check out the vibrant tech community on one of the world's most >> >>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >> >>>> >> >>>> >> >>>> _______________________________________________ >> >>>> Devil-linux-discuss mailing list >> >>>> Dev...@li... >> >>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> >>>> >> >>> >> >>> -- >> >>> >> >>> *Frank Weis* >> >>> Conseiller informaticien >> >>> >> >>> LE GOUVERNEMENT DU GRAND-DUCHÉ DE LUXEMBOURG >> >>> Ministère de l’Éducation nationale, de l’Enfance et de la Jeunesse >> >>> Centre de gestion informatique de l’éducation >> >>> >> >>> eduPôle - Walferdange >> >>> Route de Diekirch, L-7220 Walferdange >> >>> _Adresse postale_ : B.P. 98, L-7201 Bereldange >> >>> >> >>> Tél. : (+352) 247-85973 . Fax : (+352) 247-85174 >> >>> E-mail : Fra...@cg... <mailto:Fra...@cg...> >> >>> www.cgie.lu <http://www.cgie.lu/> >> >>> www.men.lu <http://www.men.lu/> >> >>> www.gouvernement.lu <http://www.gouvernement.lu> >> >>> >> >>> Ce message et toutes pièces jointes sont établis à l'intention >> >>> exclusive de ses destinataires. Ils peuvent contenir des >> >>> informations confidentielles. Si vous recevez ce message par >> >>> erreur, merci de le détruire et d'en avertir immédiatement >> >>> l'expéditeur. Toute utilisation de ce message non conforme à sa >> >>> destination, toute diffusion ou toute publication, totale ou >> >>> partielle, est interdite, sauf autorisation expresse. Ce message >> >>> a fait l'objet d'un traitement anti-virus. >> >>> >> >>> Le contenu de ce message et des pièces jointes ne pourrait >> >>> engager la responsabilité du ministère que s'il a été émis par >> >>> une personne dûment habilitée agissant dans le strict cadre des >> >>> fonctions auxquelles elle est employée et à des fins non >> >>> étrangères à ses attributions. >> >>> >> >> >> >> >> >> >> >> -- >> >> >> >> Regards >> >> Heiko Zuerker >> >> >> > >> > >> > >> > -- >> > >> > Regards >> > Heiko Zuerker >> > >> > >> > >> > ------------------------------------------------------------ >> ------------------ >> > >> > >> > >> > _______________________________________________ >> > Devil-linux-discuss mailing list >> > Dev...@li... >> > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> > >> >> >> -- >> - cameron miller >> - Manager, Network and Systems Administration >> - http://staff.adams.edu/~cdmiller >> >> ------------------------------------------------------------ >> ------------------ >> _______________________________________________ >> Devil-linux-discuss mailing list >> Dev...@li... >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> > > |
|
From: cdmiller <cdm...@ad...> - 2016-11-29 21:47:10
|
Definitely need those /usr/lib/ocf/resources.d/heartbeat scripts for fail over to function. In Debian/Ubuntu they are packaged in "resource-agents" https://packages.debian.org/sid/resource-agents Github: https://github.com/ClusterLabs/resource-agents - cameron On 11/29/2016 10:40 AM, Ma poubelle wrote: > Hello, > > First test, the corosync is working, and pacemaker start. > > crm is working, the first problem i see is that is missing some RA > (ressources agent) > > located normally on /usr/lib/ocf/resources.d/heartbeat > > for me the missing files is IPaddr and IPaddr2 used to setup VIP ip > address > > I continue tomorrow. > > Kind Regards > > 2016-11-29 14:41 GMT+01:00 Ma poubelle <the...@gm... > <mailto:the...@gm...>>: > > Hello, > > Due to too much work, I have suspended the tests with DL. > I just start again to setup a cluster using corosync and > pacemaker. Following the last mail, I understand that we cannot > use pcs but crm ! > I hope to finish soon and we are happy to have a new release ... > Regards > > > 2016-11-29 0:24 GMT+01:00 cdmiller <cdm...@ad... > <mailto:cdm...@ad...>>: > > Of corosync/pacemaker I have only used crm, not pcs. My > understanding is crm only relies on python. > > http://crmsh.nongnu.org/faq.html > <http://crmsh.nongnu.org/faq.html> > > Bottom of the old heartbeat page has a pararaph on crm and pcs: > http://www.linux-ha.org/wiki/Configuration > <http://www.linux-ha.org/wiki/Configuration> > > - cameron > > On 11/23/2016 12:48 PM, Heiko Zuerker wrote: > > All, > > > > Thoughts on this? I'd like to get to a point to finally releasing DL > > 1.8 and this is the last open item. > > > > Heiko > > > > Quoting Heiko Zuerker <he...@zu... <mailto:he...@zu...> > <mailto:he...@zu... <mailto:he...@zu...>>>: > > > >> All, > >> > >> Sounds like PCS needs ruby, which is not included in DL. > >> I really don't want to add that to DL. Can we get away without PCS? > >> > >> Heiko > >> > >> Quoting Frank Weis <Fra...@cg... <mailto:Fra...@cg...> > <mailto:Fra...@cg... <mailto:Fra...@cg...>>>: > >> > >>> Hi Christian, > >>> > >>> I try to get started with corosync/pacemaker on DL, but I get the > >>> following kind of error: > >>> > >>> root@tunnelconcentrator:~ # pcs cluster auth pcmk-1 pcmk-2 > >>> No such file or directory > >>> Error: unable to locate command: /usr/bin/ruby > >>> root@tunnelconcentrator:~ # cat /etc/Devil-release > >>> Devil-Linux 1.8.0-rc2-2016-10-06-x86_64 > >>> > >>> I am familiar with heartbeat cluster on earlier devil-linux > >>> releases but I can't figure out how to get started here. > >>> > >>> Thanks and regards > >>> > >>> Frank > >>> > >>> > >>> On 2016-10-20 17:31, Ma poubelle wrote: > >>>> Hi Heiko, > >>>> > >>>> I currently testing the corosync & pacemaker. I don't have > >>>> anymore error message when using crm & pcs. But my testing is > >>>> not finish. > >>>> > >>>> I keep you informed when done. > >>>> > >>>> Kind Regards > >>>> > >>>> Christian > >>>> > >>>> 2016-10-15 15:42 GMT+02:00 Heiko Zuerker <he...@zu... <mailto:he...@zu...> > >>>> <mailto:he...@zu... <mailto:he...@zu...>>>: > >>>> > >>>> Christian, > >>>> > >>>> Did you get a chance to test if it works now? > >>>> > >>>> > >>>> > >>>> Heiko > >>>> > >>>> Quoting Heiko Zuerker <he...@zu... <mailto:he...@zu...> > >>>> <mailto:he...@zu... <mailto:he...@zu...>>>: > >>>>> > >>>>> Christian, > >>>>> > >>>>> The latest build is uploading now to the testing directory. > >>>>> It should be complete about 30 minutes after I sent this email. > >>>>> > >>>>> Heiko > >>>>> > >>>>> Quoting Heiko Zuerker <he...@zu... <mailto:he...@zu...> > >>>>> <mailto:he...@zu... > <mailto:he...@zu...>>>: > >>>>> > >>>>>> Christian, > >>>>>> > >>>>>> All the missing python modules are now included. > >>>>>> This turned out to be a bit more complicated, since I had > >>>>>> to make some significant changes to how python modules get > >>>>>> included. The new solution is much more flexible and will > >>>>>> make it a lot easier to add python modules. (similar to > >>>>>> how perl is handled). > >>>>>> > >>>>>> I'll upload a new testing release in the next couple of days. > >>>>>> > >>>>>> Heiko > >>>>>> > >>>>>> Quoting Ma poubelle <the...@gm... <mailto:the...@gm...> > >>>>>> <mailto:the...@gm... > <mailto:the...@gm...>>>: > >>>>>> > >>>>>>> Hello Heiko, > >>>>>>> > >>>>>>> Thanks for the update. We approach the goal. > >>>>>>> > >>>>>>> I think that misses some Python modules > >>>>>>> > >>>>>>> When I launch crm I get the following output > >>>>>>> > >>>>>>> > >>>>>>> root@DL1:~ # crm > >>>>>>> Fatal error: > >>>>>>> No module named lxml > >>>>>>> No module named modules > >>>>>>> > >>>>>>> Failed to start crmsh! This is likely due to > a broken > >>>>>>> installation or a missing dependency. > >>>>>>> > >>>>>>> If you are using a packaged version of > crmsh, please try > >>>>>>> reinstalling the package. Also check your > PYTHONPATH and > >>>>>>> make sure that the crmsh module is reachable. > >>>>>>> > >>>>>>> Please file an issue describing your > installation at > >>>>>>> https://github.com/Clusterlabs/crmsh/issues/ > <https://github.com/Clusterlabs/crmsh/issues/> > >>>>>>> <https://github.com/Clusterlabs/crmsh/issues/ > <https://github.com/Clusterlabs/crmsh/issues/>> . > >>>>>>> root@DL1:~ # > >>>>>>> > >>>>>>> > >>>>>>> And when I launch pcs : > >>>>>>> > >>>>>>> root@DL1:~ # pcs > >>>>>>> Traceback (most recent call last): > >>>>>>> File "/usr/sbin/pcs", line 9, in <module> > >>>>>>> load_entry_point('pcs==0.9.153', > 'console_scripts', > >>>>>>> 'pcs')() > >>>>>>> File > >>>>>>> > "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", > >>>>>>> line 519, in load_entry_point > >>>>>>> return > get_distribution(dist).load_entry_point(group, > >>>>>>> name) > >>>>>>> File > >>>>>>> > "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", > >>>>>>> line 2630, in load_entry_point > >>>>>>> return ep.load() > >>>>>>> File > >>>>>>> > "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", > >>>>>>> line 2310, in load > >>>>>>> return self.resolve() > >>>>>>> File > >>>>>>> > "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", > >>>>>>> line 2316, in resolve > >>>>>>> module = __import__(self.module_name, > >>>>>>> fromlist=['__name__'], level=0) > >>>>>>> File > "/usr/lib/python2.7/site-packages/pcs/app.py", > >>>>>>> line 14, in <module> > >>>>>>> from pcs import ( > >>>>>>> File > "/usr/lib/python2.7/site-packages/pcs/acl.py", > >>>>>>> line 10, in <module> > >>>>>>> from pcs import ( > >>>>>>> File > "/usr/lib/python2.7/site-packages/pcs/prop.py", > >>>>>>> line 13, in <module> > >>>>>>> from pcs import utils > >>>>>>> File > "/usr/lib/python2.7/site-packages/pcs/utils.py", > >>>>>>> line 65, in <module> > >>>>>>> from pcs.lib.env import LibraryEnvironment > >>>>>>> File > "/usr/lib/python2.7/site-packages/pcs/lib/env.py", > >>>>>>> line 8, in <module> > >>>>>>> from lxml import etree > >>>>>>> ImportError: No module named lxml > >>>>>>> root@DL1:~ # > >>>>>>> > >>>>>>> Regards > >>>>>>> > >>>>>>> Christian > >>>>>>> > >>>>>>> > >>>>>>> 2016-09-24 14:24 GMT+02:00 Heiko Zuerker > >>>>>>> <he...@zu... <mailto:he...@zu...> > <mailto:he...@zu... <mailto:he...@zu...>>>: > >>>>>>> > >>>>>>> _Sorry for the delay. The latest build is > uploading now. > >>>>>>> It should be done ~1 hour from the time I sent this > >>>>>>> email._ > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> _Heiko > >>>>>>> > >>>>>>> Quoting Heiko Zuerker <he...@zu... <mailto:he...@zu...> > >>>>>>> <mailto:he...@zu... <mailto:he...@zu...>>>:_ > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>>> _They changes are in CVS. I don't think > I'll be able > >>>>>>>> to upload the nightly compile for at leat a few > >>>>>>>> days. I'll get it done as soon as I can. > >>>>>>>> > >>>>>>>> Heiko > >>>>>>>> > >>>>>>>> Quoting Heiko Zuerker <he...@zu... <mailto:he...@zu...> > >>>>>>>> <mailto:he...@zu... > <mailto:he...@zu...>>>:_ > >>>>>>>> > >>>>>>>>> _Hey > >>>>>>>>> > >>>>>>>>> I'm hoping to get a chance on Saturday to work on > >>>>>>>>> the missing components. Stay tuned for further > >>>>>>>>> updates & sorry for being so slow. > >>>>>>>>> > >>>>>>>>> Heiko > >>>>>>>>> > >>>>>>>>> Quoting Ma poubelle <the...@gm... <mailto:the...@gm...> > >>>>>>>>> <mailto:the...@gm... <mailto:the...@gm...>>>:_ > >>>>>>>>> > >>>>>>>>>> _Hi Heiko, _ > >>>>>>>>>> _ _ > >>>>>>>>>> _All the crm_... binaries is installed > and work. _ > >>>>>>>>>> _ _ > >>>>>>>>>> _My request is about the crm from crmsh . The > >>>>>>>>>> shell to interactively configure HA. > >>>>>>>>>> https://github.com/ClusterLabs/crmsh > <https://github.com/ClusterLabs/crmsh> > >>>>>>>>>> <https://github.com/ClusterLabs/crmsh > <https://github.com/ClusterLabs/crmsh>>_ > >>>>>>>>>> _ _ > >>>>>>>>>> _And other tools I like to use is pcs > >>>>>>>>>> (Pacemaker/Corosync configuration system) > >>>>>>>>>> https://github.com/ClusterLabs/pcs > <https://github.com/ClusterLabs/pcs> > >>>>>>>>>> <https://github.com/ClusterLabs/pcs > <https://github.com/ClusterLabs/pcs>>_ > >>>>>>>>>> _ _ > >>>>>>>>>> _Can you integrate them on new rc ?_ > >>>>>>>>>> _ _ > >>>>>>>>>> _Kind Regards_ > >>>>>>>>>> _ _ > >>>>>>>>>> _ _ > >>>>>>>>>> > >>>>>>>>>> _2016-08-28 15:39 GMT+02:00 Heiko Zuerker > >>>>>>>>>> <he...@zu... > <mailto:he...@zu...> <mailto:he...@zu... > <mailto:he...@zu...>>>:_ > >>>>>>>>>> > >>>>>>>>>> __Hey, > >>>>>>>>>> > >>>>>>>>>> I looked into this and all the crm binaries > >>>>>>>>>> are there and corosync & pacemaker started for me. > >>>>>>>>>> Do you have a specific error message you can > >>>>>>>>>> share? > >>>>>>>>>> Did you start with a vanilla config or are you > >>>>>>>>>> upgrading something? > >>>>>>>>>> > >>>>>>>>>> Heiko > >>>>>>>>>> > >>>>>>>>>> Quoting Heiko Zuerker <he...@zu... <mailto:he...@zu...> > >>>>>>>>>> <mailto:he...@zu... > <mailto:he...@zu...>>>:__ > >>>>>>>>>> > >>>>>>>>>>> __Hi, > >>>>>>>>>>> > >>>>>>>>>>> I won't get a chance to look into this until > >>>>>>>>>>> the weekend. > >>>>>>>>>>> > >>>>>>>>>>> Heiko > >>>>>>>>>>> > >>>>>>>>>>> Quoting Ma poubelle <the...@gm... <mailto:the...@gm...> > >>>>>>>>>>> <mailto:the...@gm... <mailto:the...@gm...>>>:__ > >>>>>>>>>>> > >>>>>>>>>>>> __Hi, > >>>>>>>>>>>> __ > >>>>>>>>>>>> __I use the 1.8.0-rc2-2016-08-13-x86_64__ > >>>>>>>>>>>> > >>>>>>>>>>>> __I just try to start a cluster using > >>>>>>>>>>>> corosync and pacemaker and i stop my test , > >>>>>>>>>>>> cannot find the crm binary ! > >>>>>>>>>>>> __ > >>>>>>>>>>>> __Kind Regards__ > >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>> __ __ > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> __-- > >>>>>>>>>>> > >>>>>>>>>>> Regards > >>>>>>>>>>> Heiko Zuerker > >>>>>>>>>>> __ > >>>>>>>>>> > >>>>>>>>>> _ _ > >>>>>>>>>> > >>>>>>>>>> __-- > >>>>>>>>>> > >>>>>>>>>> Regards > >>>>>>>>>> Heiko Zuerker > >>>>>>>>>> __ > >>>>>>>>>> > >>>>>>>>>> __------------------------------------------------------------------------------ > >>>>>>>>>> > >>>>>>>>>> _______________________________________________ > >>>>>>>>>> Devil-linux-discuss mailing list > >>>>>>>>>> Dev...@li... > <mailto:Dev...@li...> > >>>>>>>>>> > <mailto:Dev...@li... > <mailto:Dev...@li...>> > >>>>>>>>>> > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> > >>>>>>>>>> > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>>_ > >>>>>>>>>> _ > >>>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> _-- > >>>>>>>>> > >>>>>>>>> Regards > >>>>>>>>> Heiko Zuerker > >>>>>>>>> _ > >>>>>>>> > >>>>>>>> > >>>>>>>> > >>>>>>>> _-- > >>>>>>>> > >>>>>>>> Regards > >>>>>>>> Heiko Zuerker > >>>>>>>> _ > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> _-- > >>>>>>> > >>>>>>> Regards > >>>>>>> Heiko Zuerker > >>>>>>> _ > >>>>>>> > >>>>>>> _------------------------------------------------------------------------------ > >>>>>>> > >>>>>>> _______________________________________________ > >>>>>>> Devil-linux-discuss mailing list > >>>>>>> Dev...@li... > <mailto:Dev...@li...> > >>>>>>> > <mailto:Dev...@li... > <mailto:Dev...@li...>> > >>>>>>> > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> > >>>>>>> > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>>_ > >>>>>>> > >>>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> -- > >>>>>> > >>>>>> Regards > >>>>>> Heiko Zuerker > >>>>>> > >>>>> > >>>>> > >>>>> > >>>>> -- > >>>>> > >>>>> Regards > >>>>> Heiko Zuerker > >>>>> > >>>> > >>>> > >>>> > >>>> -- > >>>> > >>>> Regards > >>>> Heiko Zuerker > >>>> > >>>> > >>>> ------------------------------------------------------------------------------ > >>>> Check out the vibrant tech community on one of the world's most > >>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot > >>>> _______________________________________________ > >>>> Devil-linux-discuss mailing list > >>>> Dev...@li... > <mailto:Dev...@li...> > >>>> <mailto:Dev...@li... > <mailto:Dev...@li...>> > >>>> > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> > >>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>> > >>>> > >>>> > >>>> > >>>> > >>>> ------------------------------------------------------------------------------ > >>>> Check out the vibrant tech community on one of the world's most > >>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot > >>>> > >>>> > >>>> _______________________________________________ > >>>> Devil-linux-discuss mailing list > >>>> Dev...@li... > <mailto:Dev...@li...> > >>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> > >>>> > >>> > >>> -- > >>> > >>> *Frank Weis* > >>> Conseiller informaticien > >>> > >>> LE GOUVERNEMENT DU GRAND-DUCHÉ DE LUXEMBOURG > >>> Ministère de l’Éducation nationale, de l’Enfance et de la Jeunesse > >>> Centre de gestion informatique de l’éducation > >>> > >>> eduPôle - Walferdange > >>> Route de Diekirch, L-7220 Walferdange > >>> _Adresse postale_ : B.P. 98, L-7201 Bereldange > >>> > >>> Tél. : (+352) 247-85973 <tel:%28%2B352%29%20247-85973> . Fax : > (+352) 247-85174 <tel:%28%2B352%29%20247-85174> > >>> E-mail : Fra...@cg... <mailto:Fra...@cg...> > <mailto:Fra...@cg... <mailto:Fra...@cg...>> > >>> www.cgie.lu <http://www.cgie.lu> <http://www.cgie.lu/> > >>> www.men.lu <http://www.men.lu> <http://www.men.lu/> > >>> www.gouvernement.lu <http://www.gouvernement.lu> > <http://www.gouvernement.lu> > >>> > >>> Ce message et toutes pièces jointes sont établis à l'intention > >>> exclusive de ses destinataires. Ils peuvent contenir des > >>> informations confidentielles. Si vous recevez ce message par > >>> erreur, merci de le détruire et d'en avertir immédiatement > >>> l'expéditeur. Toute utilisation de ce message non conforme à sa > >>> destination, toute diffusion ou toute publication, totale ou > >>> partielle, est interdite, sauf autorisation expresse. Ce message > >>> a fait l'objet d'un traitement anti-virus. > >>> > >>> Le contenu de ce message et des pièces jointes ne pourrait > >>> engager la responsabilité du ministère que s'il a été émis par > >>> une personne dûment habilitée agissant dans le strict cadre des > >>> fonctions auxquelles elle est employée et à des fins non > >>> étrangères à ses attributions. > >>> > >> > >> > >> > >> -- > >> > >> Regards > >> Heiko Zuerker > >> > > > > > > > > -- > > > > Regards > > Heiko Zuerker > > > > > > > > ------------------------------------------------------------------------------ > > > > > > > > _______________________________________________ > > Devil-linux-discuss mailing list > > Dev...@li... > <mailto:Dev...@li...> > > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> > > > > > -- > - cameron miller > - Manager, Network and Systems Administration > - http://staff.adams.edu/~cdmiller > <http://staff.adams.edu/~cdmiller> > > ------------------------------------------------------------------------------ > _______________________________________________ > Devil-linux-discuss mailing list > Dev...@li... > <mailto:Dev...@li...> > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> > > > > > > ------------------------------------------------------------------------------ > > > > _______________________________________________ > Devil-linux-discuss mailing list > Dev...@li... > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > -- - cameron miller - Manager, Network and Systems Administration - http://staff.adams.edu/~cdmiller |
|
From: Heiko Z. <he...@zu...> - 2016-11-30 13:53:07
|
Thanks for checking. Not sure when I'll get to fixing this. Might be a bit since I have some other stuff going on. Heiko Quoting cdmiller <cdm...@ad...>: > Definitely need those /usr/lib/ocf/resources.d/heartbeat scripts for > fail over to function. > > In Debian/Ubuntu they are packaged in "resource-agents" > https://packages.debian.org/sid/resource-agents > > Github: > https://github.com/ClusterLabs/resource-agents > > - cameron > > On 11/29/2016 10:40 AM, Ma poubelle wrote: >> Hello, >> >> First test, the corosync is working, and pacemaker start. >> >> crm is working, the first problem i see is that is missing some RA >> (ressources agent) >> >> located normally on /usr/lib/ocf/resources.d/heartbeat >> >> for me the missing files is IPaddr and IPaddr2 used to setup VIP ip >> address >> >> I continue tomorrow. >> >> Kind Regards >> >> 2016-11-29 14:41 GMT+01:00 Ma poubelle <the...@gm... >> <mailto:the...@gm...>>: >> >> Hello, >> >> Due to too much work, I have suspended the tests with DL. >> I just start again to setup a cluster using corosync and >> pacemaker. Following the last mail, I understand that we cannot >> use pcs but crm ! >> I hope to finish soon and we are happy to have a new release ... >> Regards >> >> 2016-11-29 0:24 GMT+01:00 cdmiller <cdm...@ad... >> <mailto:cdm...@ad...>>: >> >> Of corosync/pacemaker I have only used crm, not pcs. My >> understanding is crm only relies on python. >> >> http://crmsh.nongnu.org/faq.html >> <http://crmsh.nongnu.org/faq.html> >> >> Bottom of the old heartbeat page has a pararaph on crm and pcs: >> http://www.linux-ha.org/wiki/Configuration >> <http://www.linux-ha.org/wiki/Configuration> >> >> - cameron >> >> On 11/23/2016 12:48 PM, Heiko Zuerker wrote: >> > All, >> > >> > Thoughts on this? I'd like to get to a point to finally >> releasing DL >> > 1.8 and this is the last open item. >> > >> > Heiko >> > >> > Quoting Heiko Zuerker <he...@zu... >> <mailto:he...@zu...> >> <mailto:he...@zu... <mailto:he...@zu...>>>: >> > >> >> All, >> >> >> >> Sounds like PCS needs ruby, which is not included in DL. >> >> I really don't want to add that to DL. Can we get away >> without PCS? >> >> >> >> Heiko >> >> >> >> Quoting Frank Weis <Fra...@cg... >> <mailto:Fra...@cg...> >> <mailto:Fra...@cg... <mailto:Fra...@cg...>>>: >> >> >> >>> Hi Christian, >> >>> >> >>> I try to get started with corosync/pacemaker on DL, but >> I get the >> >>> following kind of error: >> >>> >> >>> root@tunnelconcentrator:~ # pcs cluster auth pcmk-1 pcmk-2 >> >>> No such file or directory >> >>> Error: unable to locate command: /usr/bin/ruby >> >>> root@tunnelconcentrator:~ # cat /etc/Devil-release >> >>> Devil-Linux 1.8.0-rc2-2016-10-06-x86_64 >> >>> >> >>> I am familiar with heartbeat cluster on earlier devil-linux >> >>> releases but I can't figure out how to get started here. >> >>> >> >>> Thanks and regards >> >>> >> >>> Frank >> >>> >> >>> >> >>> On 2016-10-20 17:31, Ma poubelle wrote: >> >>>> Hi Heiko, >> >>>> >> >>>> I currently testing the corosync & pacemaker. I don't have >> >>>> anymore error message when using crm & pcs. But my testing is >> >>>> not finish. >> >>>> >> >>>> I keep you informed when done. >> >>>> >> >>>> Kind Regards >> >>>> >> >>>> Christian >> >>>> >> >>>> 2016-10-15 15:42 GMT+02:00 Heiko Zuerker >> <he...@zu... <mailto:he...@zu...> >> >>>> <mailto:he...@zu... <mailto:he...@zu...>>>: >> >>>> >> >>>> Christian, >> >>>> >> >>>> Did you get a chance to test if it works now? >> >>>> >> >>>> >> >>>> >> >>>> Heiko >> >>>> >> >>>> Quoting Heiko Zuerker <he...@zu... >> <mailto:he...@zu...> >> >>>> <mailto:he...@zu... <mailto:he...@zu...>>>: >> >>>>> >> >>>>> Christian, >> >>>>> >> >>>>> The latest build is uploading now to the testing >> directory. >> >>>>> It should be complete about 30 minutes after I >> sent this email. >> >>>>> >> >>>>> Heiko >> >>>>> >> >>>>> Quoting Heiko Zuerker <he...@zu... >> <mailto:he...@zu...> >> >>>>> <mailto:he...@zu... >> <mailto:he...@zu...>>>: >> >>>>> >> >>>>>> Christian, >> >>>>>> >> >>>>>> All the missing python modules are now included. >> >>>>>> This turned out to be a bit more complicated, since I had >> >>>>>> to make some significant changes to how python >> modules get >> >>>>>> included. The new solution is much more flexible and will >> >>>>>> make it a lot easier to add python modules. (similar to >> >>>>>> how perl is handled). >> >>>>>> >> >>>>>> I'll upload a new testing release in the next >> couple of days. >> >>>>>> >> >>>>>> Heiko >> >>>>>> >> >>>>>> Quoting Ma poubelle <the...@gm... >> <mailto:the...@gm...> >> >>>>>> <mailto:the...@gm... >> <mailto:the...@gm...>>>: >> >>>>>> >> >>>>>>> Hello Heiko, >> >>>>>>> >> >>>>>>> Thanks for the update. We approach the goal. >> >>>>>>> >> >>>>>>> I think that misses some Python modules >> >>>>>>> >> >>>>>>> When I launch crm I get the following output >> >>>>>>> >> >>>>>>> >> >>>>>>> root@DL1:~ # crm >> >>>>>>> Fatal error: >> >>>>>>> No module named lxml >> >>>>>>> No module named modules >> >>>>>>> >> >>>>>>> Failed to start crmsh! This is likely due to >> a broken >> >>>>>>> installation or a missing dependency. >> >>>>>>> >> >>>>>>> If you are using a packaged version of >> crmsh, please try >> >>>>>>> reinstalling the package. Also check your >> PYTHONPATH and >> >>>>>>> make sure that the crmsh module is reachable. >> >>>>>>> >> >>>>>>> Please file an issue describing your >> installation at >> >>>>>>> https://github.com/Clusterlabs/crmsh/issues/ >> <https://github.com/Clusterlabs/crmsh/issues/> >> >>>>>>> <https://github.com/Clusterlabs/crmsh/issues/ >> <https://github.com/Clusterlabs/crmsh/issues/>> . >> >>>>>>> root@DL1:~ # >> >>>>>>> >> >>>>>>> >> >>>>>>> And when I launch pcs : >> >>>>>>> >> >>>>>>> root@DL1:~ # pcs >> >>>>>>> Traceback (most recent call last): >> >>>>>>> File "/usr/sbin/pcs", line 9, in <module> >> >>>>>>> load_entry_point('pcs==0.9.153', >> 'console_scripts', >> >>>>>>> 'pcs')() >> >>>>>>> File >> >>>>>>> >> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >> >>>>>>> line 519, in load_entry_point >> >>>>>>> return >> get_distribution(dist).load_entry_point(group, >> >>>>>>> name) >> >>>>>>> File >> >>>>>>> >> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >> >>>>>>> line 2630, in load_entry_point >> >>>>>>> return ep.load() >> >>>>>>> File >> >>>>>>> >> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >> >>>>>>> line 2310, in load >> >>>>>>> return self.resolve() >> >>>>>>> File >> >>>>>>> >> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >> >>>>>>> line 2316, in resolve >> >>>>>>> module = __import__(self.module_name, >> >>>>>>> fromlist=['__name__'], level=0) >> >>>>>>> File >> "/usr/lib/python2.7/site-packages/pcs/app.py", >> >>>>>>> line 14, in <module> >> >>>>>>> from pcs import ( >> >>>>>>> File >> "/usr/lib/python2.7/site-packages/pcs/acl.py", >> >>>>>>> line 10, in <module> >> >>>>>>> from pcs import ( >> >>>>>>> File >> "/usr/lib/python2.7/site-packages/pcs/prop.py", >> >>>>>>> line 13, in <module> >> >>>>>>> from pcs import utils >> >>>>>>> File >> "/usr/lib/python2.7/site-packages/pcs/utils.py", >> >>>>>>> line 65, in <module> >> >>>>>>> from pcs.lib.env import LibraryEnvironment >> >>>>>>> File >> "/usr/lib/python2.7/site-packages/pcs/lib/env.py", >> >>>>>>> line 8, in <module> >> >>>>>>> from lxml import etree >> >>>>>>> ImportError: No module named lxml >> >>>>>>> root@DL1:~ # >> >>>>>>> >> >>>>>>> Regards >> >>>>>>> >> >>>>>>> Christian >> >>>>>>> >> >>>>>>> >> >>>>>>> 2016-09-24 14:24 GMT+02:00 Heiko Zuerker >> >>>>>>> <he...@zu... <mailto:he...@zu...> >> <mailto:he...@zu... <mailto:he...@zu...>>>: >> >>>>>>> >> >>>>>>> _Sorry for the delay. The latest build is >> uploading now. >> >>>>>>> It should be done ~1 hour from the time I sent this >> >>>>>>> email._ >> >>>>>>> >> >>>>>>> >> >>>>>>> >> >>>>>>> _Heiko >> >>>>>>> >> >>>>>>> Quoting Heiko Zuerker <he...@zu... >> <mailto:he...@zu...> >> >>>>>>> <mailto:he...@zu... >> <mailto:he...@zu...>>>:_ >> >>>>>>> >> >>>>>>> >> >>>>>>> >> >>>>>>>> _They changes are in CVS. I don't think >> I'll be able >> >>>>>>>> to upload the nightly compile for at leat a few >> >>>>>>>> days. I'll get it done as soon as I can. >> >>>>>>>> >> >>>>>>>> Heiko >> >>>>>>>> >> >>>>>>>> Quoting Heiko Zuerker <he...@zu... >> <mailto:he...@zu...> >> >>>>>>>> <mailto:he...@zu... >> <mailto:he...@zu...>>>:_ >> >>>>>>>> >> >>>>>>>>> _Hey >> >>>>>>>>> >> >>>>>>>>> I'm hoping to get a chance on Saturday to work on >> >>>>>>>>> the missing components. Stay tuned for further >> >>>>>>>>> updates & sorry for being so slow. >> >>>>>>>>> >> >>>>>>>>> Heiko >> >>>>>>>>> >> >>>>>>>>> Quoting Ma poubelle <the...@gm... >> <mailto:the...@gm...> >> >>>>>>>>> <mailto:the...@gm... >> <mailto:the...@gm...>>>:_ >> >>>>>>>>> >> >>>>>>>>>> _Hi Heiko, _ >> >>>>>>>>>> _ _ >> >>>>>>>>>> _All the crm_... binaries is installed >> and work. _ >> >>>>>>>>>> _ _ >> >>>>>>>>>> _My request is about the crm from crmsh . The >> >>>>>>>>>> shell to interactively configure HA. >> >>>>>>>>>> https://github.com/ClusterLabs/crmsh >> <https://github.com/ClusterLabs/crmsh> >> >>>>>>>>>> <https://github.com/ClusterLabs/crmsh >> <https://github.com/ClusterLabs/crmsh>>_ >> >>>>>>>>>> _ _ >> >>>>>>>>>> _And other tools I like to use is pcs >> >>>>>>>>>> (Pacemaker/Corosync configuration system) >> >>>>>>>>>> https://github.com/ClusterLabs/pcs >> <https://github.com/ClusterLabs/pcs> >> >>>>>>>>>> <https://github.com/ClusterLabs/pcs >> <https://github.com/ClusterLabs/pcs>>_ >> >>>>>>>>>> _ _ >> >>>>>>>>>> _Can you integrate them on new rc ?_ >> >>>>>>>>>> _ _ >> >>>>>>>>>> _Kind Regards_ >> >>>>>>>>>> _ _ >> >>>>>>>>>> _ _ >> >>>>>>>>>> >> >>>>>>>>>> _2016-08-28 15:39 GMT+02:00 Heiko Zuerker >> >>>>>>>>>> <he...@zu... >> <mailto:he...@zu...> <mailto:he...@zu... >> <mailto:he...@zu...>>>:_ >> >>>>>>>>>> >> >>>>>>>>>> __Hey, >> >>>>>>>>>> >> >>>>>>>>>> I looked into this and all the crm binaries >> >>>>>>>>>> are there and corosync & pacemaker >> started for me. >> >>>>>>>>>> Do you have a specific error message you can >> >>>>>>>>>> share? >> >>>>>>>>>> Did you start with a vanilla config >> or are you >> >>>>>>>>>> upgrading something? >> >>>>>>>>>> >> >>>>>>>>>> Heiko >> >>>>>>>>>> >> >>>>>>>>>> Quoting Heiko Zuerker >> <he...@zu... <mailto:he...@zu...> >> >>>>>>>>>> <mailto:he...@zu... >> <mailto:he...@zu...>>>:__ >> >>>>>>>>>> >> >>>>>>>>>>> __Hi, >> >>>>>>>>>>> >> >>>>>>>>>>> I won't get a chance to look into this until >> >>>>>>>>>>> the weekend. >> >>>>>>>>>>> >> >>>>>>>>>>> Heiko >> >>>>>>>>>>> >> >>>>>>>>>>> Quoting Ma poubelle >> <the...@gm... <mailto:the...@gm...> >> >>>>>>>>>>> <mailto:the...@gm... >> <mailto:the...@gm...>>>:__ >> >>>>>>>>>>> >> >>>>>>>>>>>> __Hi, >> >>>>>>>>>>>> __ >> >>>>>>>>>>>> __I use the 1.8.0-rc2-2016-08-13-x86_64__ >> >>>>>>>>>>>> >> >>>>>>>>>>>> __I just try to start a cluster using >> >>>>>>>>>>>> corosync and pacemaker and i stop my test , >> >>>>>>>>>>>> cannot find the crm binary ! >> >>>>>>>>>>>> __ >> >>>>>>>>>>>> __Kind Regards__ >> >>>>>>>>>>>> >> >>>>>>>>>>>> >> >>>>>>>>>>>> __ __ >> >>>>>>>>>>> >> >>>>>>>>>>> >> >>>>>>>>>>> >> >>>>>>>>>>> __-- >> >>>>>>>>>>> >> >>>>>>>>>>> Regards >> >>>>>>>>>>> Heiko Zuerker >> >>>>>>>>>>> __ >> >>>>>>>>>> >> >>>>>>>>>> _ _ >> >>>>>>>>>> >> >>>>>>>>>> __-- >> >>>>>>>>>> >> >>>>>>>>>> Regards >> >>>>>>>>>> Heiko Zuerker >> >>>>>>>>>> __ >> >>>>>>>>>> >> >>>>>>>>>> >> __------------------------------------------------------------------------------ >> >>>>>>>>>> >> >>>>>>>>>> >> _______________________________________________ >> >>>>>>>>>> Devil-linux-discuss mailing list >> >>>>>>>>>> Dev...@li... >> <mailto:Dev...@li...> >> >>>>>>>>>> >> <mailto:Dev...@li... >> <mailto:Dev...@li...>> >> >>>>>>>>>> >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >> >>>>>>>>>> >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>>_ >> >>>>>>>>>> _ >> >>>>>>>>>> >> >>>>>>>>> >> >>>>>>>>> >> >>>>>>>>> >> >>>>>>>>> _-- >> >>>>>>>>> >> >>>>>>>>> Regards >> >>>>>>>>> Heiko Zuerker >> >>>>>>>>> _ >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> _-- >> >>>>>>>> >> >>>>>>>> Regards >> >>>>>>>> Heiko Zuerker >> >>>>>>>> _ >> >>>>>>> >> >>>>>>> >> >>>>>>> >> >>>>>>> _-- >> >>>>>>> >> >>>>>>> Regards >> >>>>>>> Heiko Zuerker >> >>>>>>> _ >> >>>>>>> >> >>>>>>> >> _------------------------------------------------------------------------------ >> >>>>>>> >> >>>>>>> _______________________________________________ >> >>>>>>> Devil-linux-discuss mailing list >> >>>>>>> Dev...@li... >> <mailto:Dev...@li...> >> >>>>>>> >> <mailto:Dev...@li... >> <mailto:Dev...@li...>> >> >>>>>>> >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >> >>>>>>> >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>>_ >> >>>>>>> >> >>>>>>> >> >>>>>> >> >>>>>> >> >>>>>> >> >>>>>> -- >> >>>>>> >> >>>>>> Regards >> >>>>>> Heiko Zuerker >> >>>>>> >> >>>>> >> >>>>> >> >>>>> >> >>>>> -- >> >>>>> >> >>>>> Regards >> >>>>> Heiko Zuerker >> >>>>> >> >>>> >> >>>> >> >>>> >> >>>> -- >> >>>> >> >>>> Regards >> >>>> Heiko Zuerker >> >>>> >> >>>> >> >>>> >> ------------------------------------------------------------------------------ >> >>>> Check out the vibrant tech community on one of the >> world's most >> >>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >> >>>> _______________________________________________ >> >>>> Devil-linux-discuss mailing list >> >>>> Dev...@li... >> <mailto:Dev...@li...> >> >>>> <mailto:Dev...@li... >> <mailto:Dev...@li...>> >> >>>> >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >> >>>> >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>> >> >>>> >> >>>> >> >>>> >> >>>> >> >>>> >> ------------------------------------------------------------------------------ >> >>>> Check out the vibrant tech community on one of the world's most >> >>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >> >>>> >> >>>> >> >>>> _______________________________________________ >> >>>> Devil-linux-discuss mailing list >> >>>> Dev...@li... >> <mailto:Dev...@li...> >> >>>> >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >> >>>> >> >>> >> >>> -- >> >>> >> >>> *Frank Weis* >> >>> Conseiller informaticien >> >>> >> >>> LE GOUVERNEMENT DU GRAND-DUCHÉ DE LUXEMBOURG >> >>> Ministère de l’Éducation nationale, de l’Enfance et de >> la Jeunesse >> >>> Centre de gestion informatique de l’éducation >> >>> >> >>> eduPôle - Walferdange >> >>> Route de Diekirch, L-7220 Walferdange >> >>> _Adresse postale_ : B.P. 98, L-7201 Bereldange >> >>> >> >>> Tél. : (+352) 247-85973 <tel:%28%2B352%29%20247-85973> . Fax : >> (+352) 247-85174 <tel:%28%2B352%29%20247-85174> >> >>> E-mail : Fra...@cg... <mailto:Fra...@cg...> >> <mailto:Fra...@cg... <mailto:Fra...@cg...>> >> >>> www.cgie.lu[1] <http://www.cgie.lu> <http://www.cgie.lu/> >> >>> www.men.lu[2] <http://www.men.lu> <http://www.men.lu/> >> >>> www.gouvernement.lu[3] <http://www.gouvernement.lu> >> <http://www.gouvernement.lu> >> >>> >> >>> Ce message et toutes pièces jointes sont établis à l'intention >> >>> exclusive de ses destinataires. Ils peuvent contenir des >> >>> informations confidentielles. Si vous recevez ce message par >> >>> erreur, merci de le détruire et d'en avertir immédiatement >> >>> l'expéditeur. Toute utilisation de ce message non conforme à sa >> >>> destination, toute diffusion ou toute publication, totale ou >> >>> partielle, est interdite, sauf autorisation expresse. Ce message >> >>> a fait l'objet d'un traitement anti-virus. >> >>> >> >>> Le contenu de ce message et des pièces jointes ne pourrait >> >>> engager la responsabilité du ministère que s'il a été émis par >> >>> une personne dûment habilitée agissant dans le strict cadre des >> >>> fonctions auxquelles elle est employée et à des fins non >> >>> étrangères à ses attributions. >> >>> >> >> >> >> >> >> >> >> -- >> >> >> >> Regards >> >> Heiko Zuerker >> >> >> > >> > >> > >> > -- >> > >> > Regards >> > Heiko Zuerker >> > >> > >> > >> > >> ------------------------------------------------------------------------------ >> > >> > >> > >> > _______________________________________________ >> > Devil-linux-discuss mailing list >> > Dev...@li... >> <mailto:Dev...@li...> >> > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >> > >> >> -- >> - cameron miller >> - Manager, Network and Systems Administration >> - http://staff.adams.edu/~cdmiller >> <http://staff.adams.edu/~cdmiller> >> >> >> ------------------------------------------------------------------------------ >> _______________________________________________ >> Devil-linux-discuss mailing list >> Dev...@li... >> <mailto:Dev...@li...> >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >> >> ------------------------------------------------------------------------------ >> >> _______________________________________________ >> Devil-linux-discuss mailing list >> Dev...@li... >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > > -- > - cameron miller > - Manager, Network and Systems Administration > - http://staff.adams.edu/~cdmiller > > ------------------------------------------------------------------------------ > _______________________________________________ > Devil-linux-discuss mailing list > Dev...@li...://lists.sourceforge.net/lists/listinfo/devil-linux-discuss Links: ------ [1] http://www.cgie.lu [2] http://www.men.lu [3] http://www.gouvernement.lu -- Regards Heiko Zuerker |
|
From: Ma p. <the...@gm...> - 2016-11-30 14:15:17
|
Another misconfig is in /etc/init.d/pacemaker_remote CONFIGNAME=COROSYNC must be CONFIGNAME=PACEMAKER_REMOTE Regards 2016-11-30 14:52 GMT+01:00 Heiko Zuerker <he...@zu...>: > Thanks for checking. > Not sure when I'll get to fixing this. Might be a bit since I have some > other stuff going on. > > Heiko > > Quoting cdmiller <cdm...@ad...>: > > Definitely need those /usr/lib/ocf/resources.d/heartbeat scripts for > fail over to function. > > In Debian/Ubuntu they are packaged in "resource-agents" > https://packages.debian.org/sid/resource-agents > > Github: > https://github.com/ClusterLabs/resource-agents > > - cameron > > On 11/29/2016 10:40 AM, Ma poubelle wrote: > > Hello, > > First test, the corosync is working, and pacemaker start. > > crm is working, the first problem i see is that is missing some RA > (ressources agent) > > located normally on /usr/lib/ocf/resources.d/heartbeat > > for me the missing files is IPaddr and IPaddr2 used to setup VIP ip > address > > I continue tomorrow. > > Kind Regards > > 2016-11-29 14:41 GMT+01:00 Ma poubelle <the...@gm... > <mailto:the...@gm...>>: > > Hello, > > Due to too much work, I have suspended the tests with DL. > I just start again to setup a cluster using corosync and > pacemaker. Following the last mail, I understand that we cannot > use pcs but crm ! > I hope to finish soon and we are happy to have a new release ... > Regards > > > 2016-11-29 0:24 GMT+01:00 cdmiller <cdm...@ad... > <mailto:cdm...@ad...>>: > > Of corosync/pacemaker I have only used crm, not pcs. My > understanding is crm only relies on python. > > http://crmsh.nongnu.org/faq.html > <http://crmsh.nongnu.org/faq.html> > > Bottom of the old heartbeat page has a pararaph on crm and pcs: > http://www.linux-ha.org/wiki/Configuration > <http://www.linux-ha.org/wiki/Configuration> > > - cameron > > On 11/23/2016 12:48 PM, Heiko Zuerker wrote: > > All, > > > > Thoughts on this? I'd like to get to a point to finally > releasing DL > > 1.8 and this is the last open item. > > > > Heiko > > > > Quoting Heiko Zuerker <he...@zu... <mailto: > he...@zu...> > <mailto:he...@zu... <mailto:he...@zu...>>>: > > > >> All, > >> > >> Sounds like PCS needs ruby, which is not included in DL. > >> I really don't want to add that to DL. Can we get away without > PCS? > >> > >> Heiko > >> > >> Quoting Frank Weis <Fra...@cg... <mailto: > Fra...@cg...> > <mailto:Fra...@cg... <mailto:Fra...@cg...>>>: > >> > >>> Hi Christian, > >>> > >>> I try to get started with corosync/pacemaker on DL, but I get > the > >>> following kind of error: > >>> > >>> root@tunnelconcentrator:~ # pcs cluster auth pcmk-1 pcmk-2 > >>> No such file or directory > >>> Error: unable to locate command: /usr/bin/ruby > >>> root@tunnelconcentrator:~ # cat /etc/Devil-release > >>> Devil-Linux 1.8.0-rc2-2016-10-06-x86_64 > >>> > >>> I am familiar with heartbeat cluster on earlier devil-linux > >>> releases but I can't figure out how to get started here. > >>> > >>> Thanks and regards > >>> > >>> Frank > >>> > >>> > >>> On 2016-10-20 17:31, Ma poubelle wrote: > >>>> Hi Heiko, > >>>> > >>>> I currently testing the corosync & pacemaker. I don't have > >>>> anymore error message when using crm & pcs. But my testing is > >>>> not finish. > >>>> > >>>> I keep you informed when done. > >>>> > >>>> Kind Regards > >>>> > >>>> Christian > >>>> > >>>> 2016-10-15 15:42 GMT+02:00 Heiko Zuerker <he...@zu... > <mailto:he...@zu...> > >>>> <mailto:he...@zu... <mailto:he...@zu...>>>: > >>>> > >>>> Christian, > >>>> > >>>> Did you get a chance to test if it works now? > >>>> > >>>> > >>>> > >>>> Heiko > >>>> > >>>> Quoting Heiko Zuerker <he...@zu... <mailto: > he...@zu...> > >>>> <mailto:he...@zu... <mailto:he...@zu...>>>: > >>>>> > >>>>> Christian, > >>>>> > >>>>> The latest build is uploading now to the testing > directory. > >>>>> It should be complete about 30 minutes after I sent this > email. > >>>>> > >>>>> Heiko > >>>>> > >>>>> Quoting Heiko Zuerker <he...@zu... <mailto: > he...@zu...> > >>>>> <mailto:he...@zu... > <mailto:he...@zu...>>>: > >>>>> > >>>>>> Christian, > >>>>>> > >>>>>> All the missing python modules are now included. > >>>>>> This turned out to be a bit more complicated, since I > had > >>>>>> to make some significant changes to how python modules > get > >>>>>> included. The new solution is much more flexible and > will > >>>>>> make it a lot easier to add python modules. (similar to > >>>>>> how perl is handled). > >>>>>> > >>>>>> I'll upload a new testing release in the next couple of > days. > >>>>>> > >>>>>> Heiko > >>>>>> > >>>>>> Quoting Ma poubelle <the...@gm... <mailto: > the...@gm...> > >>>>>> <mailto:the...@gm... > <mailto:the...@gm...>>>: > >>>>>> > >>>>>>> Hello Heiko, > >>>>>>> > >>>>>>> Thanks for the update. We approach the goal. > >>>>>>> > >>>>>>> I think that misses some Python modules > >>>>>>> > >>>>>>> When I launch crm I get the following output > >>>>>>> > >>>>>>> > >>>>>>> root@DL1:~ # crm > >>>>>>> Fatal error: > >>>>>>> No module named lxml > >>>>>>> No module named modules > >>>>>>> > >>>>>>> Failed to start crmsh! This is likely due to > a broken > >>>>>>> installation or a missing dependency. > >>>>>>> > >>>>>>> If you are using a packaged version of > crmsh, please try > >>>>>>> reinstalling the package. Also check your > PYTHONPATH and > >>>>>>> make sure that the crmsh module is reachable. > >>>>>>> > >>>>>>> Please file an issue describing your > installation at > >>>>>>> https://github.com/Clusterlabs/crmsh/issues/ > <https://github.com/Clusterlabs/crmsh/issues/> > >>>>>>> <https://github.com/Clusterlabs/crmsh/issues/ > <https://github.com/Clusterlabs/crmsh/issues/>> . > >>>>>>> root@DL1:~ # > >>>>>>> > >>>>>>> > >>>>>>> And when I launch pcs : > >>>>>>> > >>>>>>> root@DL1:~ # pcs > >>>>>>> Traceback (most recent call last): > >>>>>>> File "/usr/sbin/pcs", line 9, in <module> > >>>>>>> load_entry_point('pcs==0.9.153', > 'console_scripts', > >>>>>>> 'pcs')() > >>>>>>> File > >>>>>>> > "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", > >>>>>>> line 519, in load_entry_point > >>>>>>> return > get_distribution(dist).load_entry_point(group, > >>>>>>> name) > >>>>>>> File > >>>>>>> > "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", > >>>>>>> line 2630, in load_entry_point > >>>>>>> return ep.load() > >>>>>>> File > >>>>>>> > "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", > >>>>>>> line 2310, in load > >>>>>>> return self.resolve() > >>>>>>> File > >>>>>>> > "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", > >>>>>>> line 2316, in resolve > >>>>>>> module = __import__(self.module_name, > >>>>>>> fromlist=['__name__'], level=0) > >>>>>>> File > "/usr/lib/python2.7/site-packages/pcs/app.py", > >>>>>>> line 14, in <module> > >>>>>>> from pcs import ( > >>>>>>> File > "/usr/lib/python2.7/site-packages/pcs/acl.py", > >>>>>>> line 10, in <module> > >>>>>>> from pcs import ( > >>>>>>> File > "/usr/lib/python2.7/site-packages/pcs/prop.py", > >>>>>>> line 13, in <module> > >>>>>>> from pcs import utils > >>>>>>> File > "/usr/lib/python2.7/site-packages/pcs/utils.py", > >>>>>>> line 65, in <module> > >>>>>>> from pcs.lib.env import LibraryEnvironment > >>>>>>> File > "/usr/lib/python2.7/site-packages/pcs/lib/env.py", > >>>>>>> line 8, in <module> > >>>>>>> from lxml import etree > >>>>>>> ImportError: No module named lxml > >>>>>>> root@DL1:~ # > >>>>>>> > >>>>>>> Regards > >>>>>>> > >>>>>>> Christian > >>>>>>> > >>>>>>> > >>>>>>> 2016-09-24 14:24 GMT+02:00 Heiko Zuerker > >>>>>>> <he...@zu... <mailto:he...@zu...> > <mailto:he...@zu... <mailto:he...@zu...>>>: > >>>>>>> > >>>>>>> _Sorry for the delay. The latest build is > uploading now. > >>>>>>> It should be done ~1 hour from the time I sent this > >>>>>>> email._ > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> _Heiko > >>>>>>> > >>>>>>> Quoting Heiko Zuerker <he...@zu... <mailto: > he...@zu...> > >>>>>>> <mailto:he...@zu... <mailto: > he...@zu...>>>:_ > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>>> _They changes are in CVS. I don't think > I'll be able > >>>>>>>> to upload the nightly compile for at leat a few > >>>>>>>> days. I'll get it done as soon as I can. > >>>>>>>> > >>>>>>>> Heiko > >>>>>>>> > >>>>>>>> Quoting Heiko Zuerker <he...@zu... <mailto: > he...@zu...> > >>>>>>>> <mailto:he...@zu... > <mailto:he...@zu...>>>:_ > >>>>>>>> > >>>>>>>>> _Hey > >>>>>>>>> > >>>>>>>>> I'm hoping to get a chance on Saturday to work on > >>>>>>>>> the missing components. Stay tuned for further > >>>>>>>>> updates & sorry for being so slow. > >>>>>>>>> > >>>>>>>>> Heiko > >>>>>>>>> > >>>>>>>>> Quoting Ma poubelle <the...@gm... > <mailto:the...@gm...> > >>>>>>>>> <mailto:the...@gm... <mailto: > the...@gm...>>>:_ > >>>>>>>>> > >>>>>>>>>> _Hi Heiko, _ > >>>>>>>>>> _ _ > >>>>>>>>>> _All the crm_... binaries is installed > and work. _ > >>>>>>>>>> _ _ > >>>>>>>>>> _My request is about the crm from crmsh . The > >>>>>>>>>> shell to interactively configure HA. > >>>>>>>>>> https://github.com/ClusterLabs/crmsh > <https://github.com/ClusterLabs/crmsh> > >>>>>>>>>> <https://github.com/ClusterLabs/crmsh > <https://github.com/ClusterLabs/crmsh>>_ > >>>>>>>>>> _ _ > >>>>>>>>>> _And other tools I like to use is pcs > >>>>>>>>>> (Pacemaker/Corosync configuration system) > >>>>>>>>>> https://github.com/ClusterLabs/pcs > <https://github.com/ClusterLabs/pcs> > >>>>>>>>>> <https://github.com/ClusterLabs/pcs > <https://github.com/ClusterLabs/pcs>>_ > >>>>>>>>>> _ _ > >>>>>>>>>> _Can you integrate them on new rc ?_ > >>>>>>>>>> _ _ > >>>>>>>>>> _Kind Regards_ > >>>>>>>>>> _ _ > >>>>>>>>>> _ _ > >>>>>>>>>> > >>>>>>>>>> _2016-08-28 15:39 GMT+02:00 Heiko Zuerker > >>>>>>>>>> <he...@zu... > <mailto:he...@zu...> <mailto:he...@zu... > <mailto:he...@zu...>>>:_ > >>>>>>>>>> > >>>>>>>>>> __Hey, > >>>>>>>>>> > >>>>>>>>>> I looked into this and all the crm binaries > >>>>>>>>>> are there and corosync & pacemaker started > for me. > >>>>>>>>>> Do you have a specific error message you can > >>>>>>>>>> share? > >>>>>>>>>> Did you start with a vanilla config or are > you > >>>>>>>>>> upgrading something? > >>>>>>>>>> > >>>>>>>>>> Heiko > >>>>>>>>>> > >>>>>>>>>> Quoting Heiko Zuerker <he...@zu... > <mailto:he...@zu...> > >>>>>>>>>> <mailto:he...@zu... > <mailto:he...@zu...>>>:__ > >>>>>>>>>> > >>>>>>>>>>> __Hi, > >>>>>>>>>>> > >>>>>>>>>>> I won't get a chance to look into this > until > >>>>>>>>>>> the weekend. > >>>>>>>>>>> > >>>>>>>>>>> Heiko > >>>>>>>>>>> > >>>>>>>>>>> Quoting Ma poubelle <the...@gm... > <mailto:the...@gm...> > >>>>>>>>>>> <mailto:the...@gm... <mailto: > the...@gm...>>>:__ > >>>>>>>>>>> > >>>>>>>>>>>> __Hi, > >>>>>>>>>>>> __ > >>>>>>>>>>>> __I use the 1.8.0-rc2-2016-08-13-x86_64__ > >>>>>>>>>>>> > >>>>>>>>>>>> __I just try to start a cluster using > >>>>>>>>>>>> corosync and pacemaker and i stop my test > , > >>>>>>>>>>>> cannot find the crm binary ! > >>>>>>>>>>>> __ > >>>>>>>>>>>> __Kind Regards__ > >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>> __ __ > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> __-- > >>>>>>>>>>> > >>>>>>>>>>> Regards > >>>>>>>>>>> Heiko Zuerker > >>>>>>>>>>> __ > >>>>>>>>>> > >>>>>>>>>> _ _ > >>>>>>>>>> > >>>>>>>>>> __-- > >>>>>>>>>> > >>>>>>>>>> Regards > >>>>>>>>>> Heiko Zuerker > >>>>>>>>>> __ > >>>>>>>>>> > >>>>>>>>>> __--------------------------- > --------------------------------------------------- > >>>>>>>>>> > >>>>>>>>>> _____________________________ > __________________ > >>>>>>>>>> Devil-linux-discuss mailing list > >>>>>>>>>> Dev...@li... > <mailto:Dev...@li...> > >>>>>>>>>> > <mailto:Dev...@li... > <mailto:Dev...@li...>> > >>>>>>>>>> > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> > >>>>>>>>>> > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > >>_ > >>>>>>>>>> _ > >>>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> _-- > >>>>>>>>> > >>>>>>>>> Regards > >>>>>>>>> Heiko Zuerker > >>>>>>>>> _ > >>>>>>>> > >>>>>>>> > >>>>>>>> > >>>>>>>> _-- > >>>>>>>> > >>>>>>>> Regards > >>>>>>>> Heiko Zuerker > >>>>>>>> _ > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> _-- > >>>>>>> > >>>>>>> Regards > >>>>>>> Heiko Zuerker > >>>>>>> _ > >>>>>>> > >>>>>>> _---------------------------- > -------------------------------------------------- > >>>>>>> > >>>>>>> _______________________________________________ > >>>>>>> Devil-linux-discuss mailing list > >>>>>>> Dev...@li... > <mailto:Dev...@li...> > >>>>>>> > <mailto:Dev...@li... > <mailto:Dev...@li...>> > >>>>>>> > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> > >>>>>>> > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > >>_ > >>>>>>> > >>>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> -- > >>>>>> > >>>>>> Regards > >>>>>> Heiko Zuerker > >>>>>> > >>>>> > >>>>> > >>>>> > >>>>> -- > >>>>> > >>>>> Regards > >>>>> Heiko Zuerker > >>>>> > >>>> > >>>> > >>>> > >>>> -- > >>>> > >>>> Regards > >>>> Heiko Zuerker > >>>> > >>>> > >>>> ----------------------------- > ------------------------------------------------- > >>>> Check out the vibrant tech community on one of the > world's most > >>>> engaging tech sites, SlashDot.org! > http://sdm.link/slashdot > >>>> _______________________________________________ > >>>> Devil-linux-discuss mailing list > >>>> Dev...@li... > <mailto:Dev...@li...> > >>>> <mailto:Dev...@li... > <mailto:Dev...@li...>> > >>>> > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> > >>>> <https://lists.sourceforge.net/lists/listinfo/devil- > linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > >> > >>>> > >>>> > >>>> > >>>> > >>>> ------------------------------------------------------------ > ------------------ > >>>> Check out the vibrant tech community on one of the world's > most > >>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot > >>>> > >>>> > >>>> _______________________________________________ > >>>> Devil-linux-discuss mailing list > >>>> Dev...@li... > <mailto:Dev...@li...> > >>>> https://lists.sourceforge.net/lists/listinfo/devil-linux- > discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> > >>>> > >>> > >>> -- > >>> > >>> *Frank Weis* > >>> Conseiller informaticien > >>> > >>> LE GOUVERNEMENT DU GRAND-DUCHÉ DE LUXEMBOURG > >>> Ministère de l’Éducation nationale, de l’Enfance et de la > Jeunesse > >>> Centre de gestion informatique de l’éducation > >>> > >>> eduPôle - Walferdange > >>> Route de Diekirch, L-7220 Walferdange > >>> _Adresse postale_ : B.P. 98, L-7201 Bereldange > >>> > >>> Tél. : (+352) 247-85973 <tel:%28%2B352%29%20247-85973> . Fax : > (+352) 247-85174 <tel:%28%2B352%29%20247-85174> > >>> E-mail : Fra...@cg... <mailto:Fra...@cg...> > <mailto:Fra...@cg... <mailto:Fra...@cg...>> > >>> www.cgie.lu <http://www.cgie.lu> <http://www.cgie.lu/> > >>> www.men.lu <http://www.men.lu> <http://www.men.lu/> > >>> www.gouvernement.lu <http://www.gouvernement.lu> > <http://www.gouvernement.lu> > >>> > >>> Ce message et toutes pièces jointes sont établis à l'intention > >>> exclusive de ses destinataires. Ils peuvent contenir des > >>> informations confidentielles. Si vous recevez ce message par > >>> erreur, merci de le détruire et d'en avertir immédiatement > >>> l'expéditeur. Toute utilisation de ce message non conforme à sa > >>> destination, toute diffusion ou toute publication, totale ou > >>> partielle, est interdite, sauf autorisation expresse. Ce > message > >>> a fait l'objet d'un traitement anti-virus. > >>> > >>> Le contenu de ce message et des pièces jointes ne pourrait > >>> engager la responsabilité du ministère que s'il a été émis par > >>> une personne dûment habilitée agissant dans le strict cadre des > >>> fonctions auxquelles elle est employée et à des fins non > >>> étrangères à ses attributions. > >>> > >> > >> > >> > >> -- > >> > >> Regards > >> Heiko Zuerker > >> > > > > > > > > -- > > > > Regards > > Heiko Zuerker > > > > > > > > ------------------------------------------------------------ > ------------------ > > > > > > > > _______________________________________________ > > Devil-linux-discuss mailing list > > Dev...@li... > <mailto:Dev...@li...> > > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> > > > > > -- > - cameron miller > - Manager, Network and Systems Administration > - http://staff.adams.edu/~cdmiller > <http://staff.adams.edu/~cdmiller> > > ------------------------------------------------------------ > ------------------ > _______________________________________________ > Devil-linux-discuss mailing list > Dev...@li... > <mailto:Dev...@li...> > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> > > > > > > ------------------------------------------------------------ > ------------------ > > > > _______________________________________________ > Devil-linux-discuss mailing list > Dev...@li... > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > > -- > - cameron miller > - Manager, Network and Systems Administration > - http://staff.adams.edu/~cdmiller > > ------------------------------------------------------------ > ------------------ > _______________________________________________ > Devil-linux-discuss mailing list > Dev...@li...://lists. > sourceforge.net/lists/listinfo/devil-linux-discuss > > > > > -- > > Regards > Heiko Zuerker > > > ------------------------------------------------------------ > ------------------ > > _______________________________________________ > Devil-linux-discuss mailing list > Dev...@li... > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > > |
|
From: Heiko Z. <he...@zu...> - 2016-12-01 11:07:56
|
Fixed in CVS. Thanks Heiko Quoting Ma poubelle <the...@gm...>: > Another misconfig is in /etc/init.d/pacemaker_remote > CONFIGNAME=COROSYNC > > must be > > CONFIGNAME=PACEMAKER_REMOTE > > > Regards > > > 2016-11-30 14:52 GMT+01:00 Heiko Zuerker <he...@zu...>: > >> _Thanks for checking. >> Not sure when I'll get to fixing this. Might be a bit since I have >> some other stuff going on. >> >> Heiko >> >> Quoting cdmiller <cdm...@ad...>:_ >> >>> _Definitely need those /usr/lib/ocf/resources.d/heartbeat scripts for >>> fail over to function. >>> >>> In Debian/Ubuntu they are packaged in "resource-agents" >>> https://packages.debian.org/sid/resource-agents >>> >>> Github: >>> https://github.com/ClusterLabs/resource-agents >>> >>> - cameron >>> >>> On 11/29/2016 10:40 AM, Ma poubelle wrote: _ >>>> _Hello, >>>> >>>> First test, the corosync is working, and pacemaker start. >>>> >>>> crm is working, the first problem i see is that is missing some RA >>>> (ressources agent) >>>> >>>> located normally on /usr/lib/ocf/resources.d/heartbeat >>>> >>>> for me the missing files is IPaddr and IPaddr2 used to setup VIP ip >>>> address >>>> >>>> I continue tomorrow. >>>> >>>> Kind Regards >>>> >>>> 2016-11-29 14:41 GMT+01:00 Ma poubelle <the...@gm... >>>> <mailto:the...@gm...>>:[1] >>>> >>>> Hello, >>>> >>>> Due to too much work, I have suspended the tests with DL. >>>> I just start again to setup a cluster using corosync and >>>> pacemaker. Following the last mail, I understand that we cannot >>>> use pcs but crm ! >>>> I hope to finish soon and we are happy to have a new release ... >>>> Regards >>>> >>>> 2016-11-29 0:24 GMT+01:00 cdmiller <cdm...@ad... >>>> <mailto:cdm...@ad...>>:[2] >>>> >>>> Of corosync/pacemaker I have only used crm, not pcs. My >>>> understanding is crm only relies on python. >>>> >>>> http://crmsh.nongnu.org/faq.html >>>> <http://crmsh.nongnu.org/faq.html> >>>> >>>> Bottom of the old heartbeat page has a pararaph on crm and pcs: >>>> http://www.linux-ha.org/wiki/Configuration >>>> <http://www.linux-ha.org/wiki/Configuration> >>>> >>>> - cameron >>>> >>>> On 11/23/2016 12:48 PM, Heiko Zuerker wrote: >>>> > All, >>>> > >>>> > Thoughts on this? I'd like to get to a point to finally >>>> releasing DL >>>> > 1.8 and this is the last open item. >>>> > >>>> > Heiko >>>> > >>>> > Quoting Heiko Zuerker <he...@zu... >>>> <mailto:he...@zu...>[3] >>>> <mailto:he...@zu... <mailto:he...@zu...>>>:[4] >>>> > >>>> >> All, >>>> >> >>>> >> Sounds like PCS needs ruby, which is not included in DL. >>>> >> I really don't want to add that to DL. Can we get away >>>> without PCS? >>>> >> >>>> >> Heiko >>>> >> >>>> >> Quoting Frank Weis <Fra...@cg... >>>> <mailto:Fra...@cg...>[5] >>>> <mailto:Fra...@cg... <mailto:Fra...@cg...>>>:[6] >>>> >> >>>> >>> Hi Christian, >>>> >>> >>>> >>> I try to get started with corosync/pacemaker on DL, >>>> but I get the >>>> >>> following kind of error: >>>> >>> >>>> >>> root@tunnelconcentrator:~ # pcs cluster auth pcmk-1 pcmk-2 >>>> >>> No such file or directory >>>> >>> Error: unable to locate command: /usr/bin/ruby >>>> >>> root@tunnelconcentrator:~ # cat /etc/Devil-release >>>> >>> Devil-Linux 1.8.0-rc2-2016-10-06-x86_64 >>>> >>> >>>> >>> I am familiar with heartbeat cluster on earlier devil-linux >>>> >>> releases but I can't figure out how to get started here. >>>> >>> >>>> >>> Thanks and regards >>>> >>> >>>> >>> Frank >>>> >>> >>>> >>> >>>> >>> On 2016-10-20 17:31, Ma poubelle wrote: >>>> >>>> Hi Heiko, >>>> >>>> >>>> >>>> I currently testing the corosync & pacemaker. I don't have >>>> >>>> anymore error message when using crm & pcs. But my testing is >>>> >>>> not finish. >>>> >>>> >>>> >>>> I keep you informed when done. >>>> >>>> >>>> >>>> Kind Regards >>>> >>>> >>>> >>>> Christian >>>> >>>> >>>> >>>> 2016-10-15 15:42 GMT+02:00 Heiko Zuerker >>>> <he...@zu... <mailto:he...@zu...>[3] >>>> >>>> <mailto:he...@zu... <mailto:he...@zu...>>>:[4] >>>> >>>> >>>> >>>> Christian, >>>> >>>> >>>> >>>> Did you get a chance to test if it works now? >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> Heiko >>>> >>>> >>>> >>>> Quoting Heiko Zuerker <he...@zu... >>>> <mailto:he...@zu...>[3] >>>> >>>> <mailto:he...@zu... >>>> <mailto:he...@zu...>>>:[4] >>>> >>>>> >>>> >>>>> Christian, >>>> >>>>> >>>> >>>>> The latest build is uploading now to the >>>> testing directory. >>>> >>>>> It should be complete about 30 minutes after I >>>> sent this email. >>>> >>>>> >>>> >>>>> Heiko >>>> >>>>> >>>> >>>>> Quoting Heiko Zuerker <he...@zu... >>>> <mailto:he...@zu...>[3] >>>> >>>>> <mailto:he...@zu... >>>> <mailto:he...@zu...>>>:[4] >>>> >>>>> >>>> >>>>>> Christian, >>>> >>>>>> >>>> >>>>>> All the missing python modules are now included. >>>> >>>>>> This turned out to be a bit more complicated, >>>> since I had >>>> >>>>>> to make some significant changes to how python >>>> modules get >>>> >>>>>> included. The new solution is much more >>>> flexible and will >>>> >>>>>> make it a lot easier to add python modules. (similar to >>>> >>>>>> how perl is handled). >>>> >>>>>> >>>> >>>>>> I'll upload a new testing release in the next >>>> couple of days. >>>> >>>>>> >>>> >>>>>> Heiko >>>> >>>>>> >>>> >>>>>> Quoting Ma poubelle <the...@gm... >>>> <mailto:the...@gm...>[7] >>>> >>>>>> <mailto:the...@gm... >>>> <mailto:the...@gm...>>>:[8] >>>> >>>>>> >>>> >>>>>>> Hello Heiko, >>>> >>>>>>> >>>> >>>>>>> Thanks for the update. We approach the goal. >>>> >>>>>>> >>>> >>>>>>> I think that misses some Python modules >>>> >>>>>>> >>>> >>>>>>> When I launch crm I get the following output >>>> >>>>>>> >>>> >>>>>>> >>>> >>>>>>> root@DL1:~ # crm >>>> >>>>>>> Fatal error: >>>> >>>>>>> No module named lxml >>>> >>>>>>> No module named modules >>>> >>>>>>> >>>> >>>>>>> Failed to start crmsh! This is likely due to >>>> a broken >>>> >>>>>>> installation or a missing dependency. >>>> >>>>>>> >>>> >>>>>>> If you are using a packaged version of >>>> crmsh, please try >>>> >>>>>>> reinstalling the package. Also check your >>>> PYTHONPATH and >>>> >>>>>>> make sure that the crmsh module is reachable. >>>> >>>>>>> >>>> >>>>>>> Please file an issue describing your >>>> installation at >>>> >>>>>>> https://github.com/Clusterlabs/crmsh/issues/ >>>> <https://github.com/Clusterlabs/crmsh/issues/> >>>> >>>>>>> <https://github.com/Clusterlabs/crmsh/issues/ >>>> <https://github.com/Clusterlabs/crmsh/issues/>> . >>>> >>>>>>> root@DL1:~ # >>>> >>>>>>> >>>> >>>>>>> >>>> >>>>>>> And when I launch pcs : >>>> >>>>>>> >>>> >>>>>>> root@DL1:~ # pcs >>>> >>>>>>> Traceback (most recent call last): >>>> >>>>>>> File "/usr/sbin/pcs", line 9, in <module> >>>> >>>>>>> load_entry_point('pcs==0.9.153', >>>> 'console_scripts', >>>> >>>>>>> 'pcs')() >>>> >>>>>>> File >>>> >>>>>>> >>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>> >>>>>>> line 519, in load_entry_point >>>> >>>>>>> return >>>> get_distribution(dist).load_entry_point(group, >>>> >>>>>>> name) >>>> >>>>>>> File >>>> >>>>>>> >>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>> >>>>>>> line 2630, in load_entry_point >>>> >>>>>>> return ep.load() >>>> >>>>>>> File >>>> >>>>>>> >>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>> >>>>>>> line 2310, in load >>>> >>>>>>> return self.resolve() >>>> >>>>>>> File >>>> >>>>>>> >>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>> >>>>>>> line 2316, in resolve >>>> >>>>>>> module = __import__(self.module_name, >>>> >>>>>>> fromlist=['__name__'], level=0) >>>> >>>>>>> File >>>> "/usr/lib/python2.7/site-packages/pcs/app.py", >>>> >>>>>>> line 14, in <module> >>>> >>>>>>> from pcs import ( >>>> >>>>>>> File >>>> "/usr/lib/python2.7/site-packages/pcs/acl.py", >>>> >>>>>>> line 10, in <module> >>>> >>>>>>> from pcs import ( >>>> >>>>>>> File >>>> "/usr/lib/python2.7/site-packages/pcs/prop.py", >>>> >>>>>>> line 13, in <module> >>>> >>>>>>> from pcs import utils >>>> >>>>>>> File >>>> "/usr/lib/python2.7/site-packages/pcs/utils.py", >>>> >>>>>>> line 65, in <module> >>>> >>>>>>> from pcs.lib.env import LibraryEnvironment >>>> >>>>>>> File >>>> "/usr/lib/python2.7/site-packages/pcs/lib/env.py", >>>> >>>>>>> line 8, in <module> >>>> >>>>>>> from lxml import etree >>>> >>>>>>> ImportError: No module named lxml >>>> >>>>>>> root@DL1:~ # >>>> >>>>>>> >>>> >>>>>>> Regards >>>> >>>>>>> >>>> >>>>>>> Christian >>>> >>>>>>> >>>> >>>>>>> >>>> >>>>>>> 2016-09-24 14:24 GMT+02:00 Heiko Zuerker >>>> >>>>>>> <he...@zu... <mailto:he...@zu...>[3] >>>> <mailto:he...@zu... <mailto:he...@zu...>>>:[4] >>>> >>>>>>> >>>> >>>>>>> _Sorry for the delay. The latest build is >>>> uploading now. >>>> >>>>>>> It should be done ~1 hour from the time I >>>> sent this >>>> >>>>>>> email._ >>>> >>>>>>> >>>> >>>>>>> >>>> >>>>>>> >>>> >>>>>>> _Heiko >>>> >>>>>>> >>>> >>>>>>> Quoting Heiko Zuerker <he...@zu... >>>> <mailto:he...@zu...>[3] >>>> >>>>>>> <mailto:he...@zu... >>>> <mailto:he...@zu...>>>:_[9] >>>> >>>>>>> >>>> >>>>>>> >>>> >>>>>>> >>>> >>>>>>>> _They changes are in CVS. I don't think >>>> I'll be able >>>> >>>>>>>> to upload the nightly compile for at leat a few >>>> >>>>>>>> days. I'll get it done as soon as I can. >>>> >>>>>>>> >>>> >>>>>>>> Heiko >>>> >>>>>>>> >>>> >>>>>>>> Quoting Heiko Zuerker <he...@zu... >>>> <mailto:he...@zu...>[3] >>>> >>>>>>>> <mailto:he...@zu... >>>> <mailto:he...@zu...>>>:_[9] >>>> >>>>>>>> >>>> >>>>>>>>> _Hey >>>> >>>>>>>>> >>>> >>>>>>>>> I'm hoping to get a chance on Saturday >>>> to work on >>>> >>>>>>>>> the missing components. Stay tuned for further >>>> >>>>>>>>> updates & sorry for being so slow. >>>> >>>>>>>>> >>>> >>>>>>>>> Heiko >>>> >>>>>>>>> >>>> >>>>>>>>> Quoting Ma poubelle >>>> <the...@gm... <mailto:the...@gm...>[7] >>>> >>>>>>>>> <mailto:the...@gm... >>>> <mailto:the...@gm...>>>:_[10] >>>> >>>>>>>>> >>>> >>>>>>>>>> _Hi Heiko, _ >>>> >>>>>>>>>> _ _ >>>> >>>>>>>>>> _All the crm_... binaries is installed >>>> and work. _ >>>> >>>>>>>>>> _ _ >>>> >>>>>>>>>> _My request is about the crm from crmsh . The >>>> >>>>>>>>>> shell to interactively configure HA. >>>> >>>>>>>>>> https://github.com/ClusterLabs/crmsh >>>> <https://github.com/ClusterLabs/crmsh> >>>> >>>>>>>>>> <https://github.com/ClusterLabs/crmsh >>>> <https://github.com/ClusterLabs/crmsh>>_ >>>> >>>>>>>>>> _ _ >>>> >>>>>>>>>> _And other tools I like to use is pcs >>>> >>>>>>>>>> (Pacemaker/Corosync configuration system) >>>> >>>>>>>>>> https://github.com/ClusterLabs/pcs >>>> <https://github.com/ClusterLabs/pcs> >>>> >>>>>>>>>> <https://github.com/ClusterLabs/pcs >>>> <https://github.com/ClusterLabs/pcs>>_ >>>> >>>>>>>>>> _ _ >>>> >>>>>>>>>> _Can you integrate them on new rc ?_ >>>> >>>>>>>>>> _ _ >>>> >>>>>>>>>> _Kind Regards_ >>>> >>>>>>>>>> _ _ >>>> >>>>>>>>>> _ _ >>>> >>>>>>>>>> >>>> >>>>>>>>>> _2016-08-28 15:39 GMT+02:00 Heiko Zuerker >>>> >>>>>>>>>> <he...@zu... >>>> <mailto:he...@zu...>[3] <mailto:he...@zu... >>>> <mailto:he...@zu...>>>:_[9] >>>> >>>>>>>>>> >>>> >>>>>>>>>> __Hey, >>>> >>>>>>>>>> >>>> >>>>>>>>>> I looked into this and all the crm binaries >>>> >>>>>>>>>> are there and corosync & pacemaker >>>> started for me. >>>> >>>>>>>>>> Do you have a specific error >>>> message you can >>>> >>>>>>>>>> share? >>>> >>>>>>>>>> Did you start with a vanilla >>>> config or are you >>>> >>>>>>>>>> upgrading something? >>>> >>>>>>>>>> >>>> >>>>>>>>>> Heiko >>>> >>>>>>>>>> >>>> >>>>>>>>>> Quoting Heiko Zuerker >>>> <he...@zu... <mailto:he...@zu...>[3] >>>> >>>>>>>>>> <mailto:he...@zu... >>>> <mailto:he...@zu...>>>:__[11] >>>> >>>>>>>>>> >>>> >>>>>>>>>>> __Hi, >>>> >>>>>>>>>>> >>>> >>>>>>>>>>> I won't get a chance to look into >>>> this until >>>> >>>>>>>>>>> the weekend. >>>> >>>>>>>>>>> >>>> >>>>>>>>>>> Heiko >>>> >>>>>>>>>>> >>>> >>>>>>>>>>> Quoting Ma poubelle >>>> <the...@gm... <mailto:the...@gm...>[7] >>>> >>>>>>>>>>> <mailto:the...@gm... >>>> <mailto:the...@gm...>>>:__[12] >>>> >>>>>>>>>>> >>>> >>>>>>>>>>>> __Hi, >>>> >>>>>>>>>>>> __ >>>> >>>>>>>>>>>> __I use the 1.8.0-rc2-2016-08-13-x86_64__ >>>> >>>>>>>>>>>> >>>> >>>>>>>>>>>> __I just try to start a cluster using >>>> >>>>>>>>>>>> corosync and pacemaker and i >>>> stop my test , >>>> >>>>>>>>>>>> cannot find the crm binary ! >>>> >>>>>>>>>>>> __ >>>> >>>>>>>>>>>> __Kind Regards__ >>>> >>>>>>>>>>>> >>>> >>>>>>>>>>>> >>>> >>>>>>>>>>>> __ __ >>>> >>>>>>>>>>> >>>> >>>>>>>>>>> >>>> >>>>>>>>>>> >>>> >>>>>>>>>>> __-- >>>> >>>>>>>>>>> >>>> >>>>>>>>>>> Regards >>>> >>>>>>>>>>> Heiko Zuerker >>>> >>>>>>>>>>> __ >>>> >>>>>>>>>> >>>> >>>>>>>>>> _ _ >>>> >>>>>>>>>> >>>> >>>>>>>>>> __-- >>>> >>>>>>>>>> >>>> >>>>>>>>>> Regards >>>> >>>>>>>>>> Heiko Zuerker >>>> >>>>>>>>>> __ >>>> >>>>>>>>>> >>>> >>>>>>>>>> >>>> __------------------------------------------------------------------------------ >>>> >>>>>>>>>> >>>> >>>>>>>>>> >>>> _______________________________________________ >>>> >>>>>>>>>> Devil-linux-discuss mailing list >>>> >>>>>>>>>> Dev...@li... >>>> <mailto:Dev...@li...>[13] >>>> >>>>>>>>>> >>>> <mailto:Dev...@li... >>>> <mailto:Dev...@li...>>[14] >>>> >>>>>>>>>> >>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>> >>>>>>>>>> >>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>> >>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>>_ >>>> >>>>>>>>>> _ >>>> >>>>>>>>>> >>>> >>>>>>>>> >>>> >>>>>>>>> >>>> >>>>>>>>> >>>> >>>>>>>>> _-- >>>> >>>>>>>>> >>>> >>>>>>>>> Regards >>>> >>>>>>>>> Heiko Zuerker >>>> >>>>>>>>> _ >>>> >>>>>>>> >>>> >>>>>>>> >>>> >>>>>>>> >>>> >>>>>>>> _-- >>>> >>>>>>>> >>>> >>>>>>>> Regards >>>> >>>>>>>> Heiko Zuerker >>>> >>>>>>>> _ >>>> >>>>>>> >>>> >>>>>>> >>>> >>>>>>> >>>> >>>>>>> _-- >>>> >>>>>>> >>>> >>>>>>> Regards >>>> >>>>>>> Heiko Zuerker >>>> >>>>>>> _ >>>> >>>>>>> >>>> >>>>>>> >>>> _------------------------------------------------------------------------------ >>>> >>>>>>> >>>> >>>>>>> _______________________________________________ >>>> >>>>>>> Devil-linux-discuss mailing list >>>> >>>>>>> Dev...@li... >>>> <mailto:Dev...@li...>[13] >>>> >>>>>>> >>>> <mailto:Dev...@li... >>>> <mailto:Dev...@li...>>[14] >>>> >>>>>>> >>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>> >>>>>>> >>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>> >>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>>_ >>>> >>>>>>> >>>> >>>>>>> >>>> >>>>>> >>>> >>>>>> >>>> >>>>>> >>>> >>>>>> -- >>>> >>>>>> >>>> >>>>>> Regards >>>> >>>>>> Heiko Zuerker >>>> >>>>>> >>>> >>>>> >>>> >>>>> >>>> >>>>> >>>> >>>>> -- >>>> >>>>> >>>> >>>>> Regards >>>> >>>>> Heiko Zuerker >>>> >>>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> -- >>>> >>>> >>>> >>>> Regards >>>> >>>> Heiko Zuerker >>>> >>>> >>>> >>>> >>>> >>>> >>>> ------------------------------------------------------------------------------ >>>> >>>> Check out the vibrant tech community on one of >>>> the world's most >>>> >>>> engaging tech sites, SlashDot.org! >>>> http://sdm.link/slashdot >>>> >>>> _______________________________________________ >>>> >>>> Devil-linux-discuss mailing list >>>> >>>> Dev...@li... >>>> <mailto:Dev...@li...>[13] >>>> >>>> <mailto:Dev...@li... >>>> <mailto:Dev...@li...>>[14] >>>> >>>> >>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>> >>>> >>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>> >>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> ------------------------------------------------------------------------------ >>>> >>>> Check out the vibrant tech community on one of the >>>> world's most >>>> >>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >>>> >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> >>>> Devil-linux-discuss mailing list >>>> >>>> Dev...@li... >>>> <mailto:Dev...@li...>[13] >>>> >>>> >>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>> >>>> >>>> >>> >>>> >>> -- >>>> >>> >>>> >>> *Frank Weis* >>>> >>> Conseiller informaticien >>>> >>> >>>> >>> LE GOUVERNEMENT DU GRAND-DUCHÉ DE LUXEMBOURG >>>> >>> Ministère de l’Éducation nationale, de l’Enfance et >>>> de la Jeunesse >>>> >>> Centre de gestion informatique de l’éducation >>>> >>> >>>> >>> eduPôle - Walferdange >>>> >>> Route de Diekirch, L-7220 Walferdange >>>> >>> _Adresse postale_ : B.P. 98, L-7201 Bereldange >>>> >>> >>>> >>> Tél. : (+352) 247-85973 <tel:%28%2B352%29%20247-85973> . Fax : >>>> (+352) 247-85174 <tel:%28%2B352%29%20247-85174> >>>> >>> E-mail : Fra...@cg... <mailto:Fra...@cg...>[5] >>>> <mailto:Fra...@cg... <mailto:Fra...@cg...>>[15] >>>> >>> www.cgie.lu[16] <http://www.cgie.lu> <http://www.cgie.lu/> >>>> >>> www.men.lu[17] <http://www.men.lu> <http://www.men.lu/> >>>> >>> www.gouvernement.lu[18] <http://www.gouvernement.lu> >>>> <http://www.gouvernement.lu> >>>> >>> >>>> >>> Ce message et toutes pièces jointes sont établis à l'intention >>>> >>> exclusive de ses destinataires. Ils peuvent contenir des >>>> >>> informations confidentielles. Si vous recevez ce message par >>>> >>> erreur, merci de le détruire et d'en avertir immédiatement >>>> >>> l'expéditeur. Toute utilisation de ce message non >>>> conforme à sa >>>> >>> destination, toute diffusion ou toute publication, totale ou >>>> >>> partielle, est interdite, sauf autorisation expresse. >>>> Ce message >>>> >>> a fait l'objet d'un traitement anti-virus. >>>> >>> >>>> >>> Le contenu de ce message et des pièces jointes ne pourrait >>>> >>> engager la responsabilité du ministère que s'il a été émis par >>>> >>> une personne dûment habilitée agissant dans le strict >>>> cadre des >>>> >>> fonctions auxquelles elle est employée et à des fins non >>>> >>> étrangères à ses attributions. >>>> >>> >>>> >> >>>> >> >>>> >> >>>> >> -- >>>> >> >>>> >> Regards >>>> >> Heiko Zuerker >>>> >> >>>> > >>>> > >>>> > >>>> > -- >>>> > >>>> > Regards >>>> > Heiko Zuerker >>>> > >>>> > >>>> > >>>> > >>>> ------------------------------------------------------------------------------ >>>> > >>>> > >>>> > >>>> > _______________________________________________ >>>> > Devil-linux-discuss mailing list >>>> > Dev...@li... >>>> <mailto:Dev...@li...>[13] >>>> > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>> > >>>> >>>> -- >>>> - cameron miller >>>> - Manager, Network and Systems Administration >>>> - http://staff.adams.edu/~cdmiller >>>> <http://staff.adams.edu/~cdmiller> >>>> >>>> >>>> ------------------------------------------------------------------------------ >>>> _______________________________________________ >>>> Devil-linux-discuss mailing list >>>> Dev...@li... >>>> <mailto:Dev...@li...>[13] >>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>> >>>> ------------------------------------------------------------------------------ >>>> >>>> _______________________________________________ >>>> Devil-linux-discuss mailing list >>>> Dev...@li... >>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss_ >>> >>> _-- >>> - cameron miller >>> - Manager, Network and Systems Administration >>> - http://staff.adams.edu/~cdmiller >>> >>> ------------------------------------------------------------------------------ >>> _______________________________________________ >>> Devil-linux-discuss mailing list_ >>> >>> _De...@li...://lists.sourceforge.net/lists/listinfo/devil-linux-discuss[19]_ >> >> >> _-- >> >> Regards >> Heiko Zuerker >> _ >> >> _------------------------------------------------------------------------------ >> >> _______________________________________________ >> Devil-linux-discuss mailing list >> Dev...@li... >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss_ >> Links: ------ [1] mailto:the...@gm...%3E%3E: [2] mailto:cdm...@ad...%3E%3E: [3] mailto:he...@zu...%3E [4] mailto:he...@zu...%3E%3E%3E: [5] mailto:Fra...@cg...%3E [6] mailto:Fra...@cg...%3E%3E%3E: [7] mailto:the...@gm...%3E [8] mailto:the...@gm...%3E%3E%3E: [9] mailto:he...@zu...%3E%3E%3E:_ [10] mailto:the...@gm...%3E%3E%3E:_ [11] mailto:he...@zu...%3E%3E%3E:__ [12] mailto:the...@gm...%3E%3E%3E:__ [13] mailto:Dev...@li...%3E [14] mailto:Dev...@li...%3E%3E [15] mailto:Fra...@cg...%3E%3E [16] http://www.cgie.lu [17] http://www.men.lu [18] http://www.gouvernement.lu [19] -- Regards Heiko Zuerker ... [truncated message content] |
|
From: Ma p. <the...@gm...> - 2016-11-30 15:08:55
|
A small error occurs when entering : corosync -v corosync: /lib64/libsqlite3.so: no version information available (required by /lib64/libsoftokn3.so) Corosync Cluster Engine, version 'UNKNOWN' Regards 2016-11-30 15:15 GMT+01:00 Ma poubelle <the...@gm...>: > Another misconfig is in /etc/init.d/pacemaker_remote > > CONFIGNAME=COROSYNC > > must be > > CONFIGNAME=PACEMAKER_REMOTE > > > Regards > > 2016-11-30 14:52 GMT+01:00 Heiko Zuerker <he...@zu...>: > >> Thanks for checking. >> Not sure when I'll get to fixing this. Might be a bit since I have some >> other stuff going on. >> >> Heiko >> >> Quoting cdmiller <cdm...@ad...>: >> >> Definitely need those /usr/lib/ocf/resources.d/heartbeat scripts for >> fail over to function. >> >> In Debian/Ubuntu they are packaged in "resource-agents" >> https://packages.debian.org/sid/resource-agents >> >> Github: >> https://github.com/ClusterLabs/resource-agents >> >> - cameron >> >> On 11/29/2016 10:40 AM, Ma poubelle wrote: >> >> Hello, >> >> First test, the corosync is working, and pacemaker start. >> >> crm is working, the first problem i see is that is missing some RA >> (ressources agent) >> >> located normally on /usr/lib/ocf/resources.d/heartbeat >> >> for me the missing files is IPaddr and IPaddr2 used to setup VIP ip >> address >> >> I continue tomorrow. >> >> Kind Regards >> >> 2016-11-29 14:41 GMT+01:00 Ma poubelle <the...@gm... >> <mailto:the...@gm...>>: >> >> Hello, >> >> Due to too much work, I have suspended the tests with DL. >> I just start again to setup a cluster using corosync and >> pacemaker. Following the last mail, I understand that we cannot >> use pcs but crm ! >> I hope to finish soon and we are happy to have a new release ... >> Regards >> >> >> 2016-11-29 0:24 GMT+01:00 cdmiller <cdm...@ad... >> <mailto:cdm...@ad...>>: >> >> Of corosync/pacemaker I have only used crm, not pcs. My >> understanding is crm only relies on python. >> >> http://crmsh.nongnu.org/faq.html >> <http://crmsh.nongnu.org/faq.html> >> >> Bottom of the old heartbeat page has a pararaph on crm and pcs: >> http://www.linux-ha.org/wiki/Configuration >> <http://www.linux-ha.org/wiki/Configuration> >> >> - cameron >> >> On 11/23/2016 12:48 PM, Heiko Zuerker wrote: >> > All, >> > >> > Thoughts on this? I'd like to get to a point to finally >> releasing DL >> > 1.8 and this is the last open item. >> > >> > Heiko >> > >> > Quoting Heiko Zuerker <he...@zu... <mailto: >> he...@zu...> >> <mailto:he...@zu... <mailto:he...@zu...>>>: >> > >> >> All, >> >> >> >> Sounds like PCS needs ruby, which is not included in DL. >> >> I really don't want to add that to DL. Can we get away without >> PCS? >> >> >> >> Heiko >> >> >> >> Quoting Frank Weis <Fra...@cg... <mailto: >> Fra...@cg...> >> <mailto:Fra...@cg... <mailto:Fra...@cg...>>>: >> >> >> >>> Hi Christian, >> >>> >> >>> I try to get started with corosync/pacemaker on DL, but I get >> the >> >>> following kind of error: >> >>> >> >>> root@tunnelconcentrator:~ # pcs cluster auth pcmk-1 pcmk-2 >> >>> No such file or directory >> >>> Error: unable to locate command: /usr/bin/ruby >> >>> root@tunnelconcentrator:~ # cat /etc/Devil-release >> >>> Devil-Linux 1.8.0-rc2-2016-10-06-x86_64 >> >>> >> >>> I am familiar with heartbeat cluster on earlier devil-linux >> >>> releases but I can't figure out how to get started here. >> >>> >> >>> Thanks and regards >> >>> >> >>> Frank >> >>> >> >>> >> >>> On 2016-10-20 17:31, Ma poubelle wrote: >> >>>> Hi Heiko, >> >>>> >> >>>> I currently testing the corosync & pacemaker. I don't have >> >>>> anymore error message when using crm & pcs. But my testing is >> >>>> not finish. >> >>>> >> >>>> I keep you informed when done. >> >>>> >> >>>> Kind Regards >> >>>> >> >>>> Christian >> >>>> >> >>>> 2016-10-15 15:42 GMT+02:00 Heiko Zuerker <he...@zu... >> <mailto:he...@zu...> >> >>>> <mailto:he...@zu... <mailto:he...@zu...>>>: >> >>>> >> >>>> Christian, >> >>>> >> >>>> Did you get a chance to test if it works now? >> >>>> >> >>>> >> >>>> >> >>>> Heiko >> >>>> >> >>>> Quoting Heiko Zuerker <he...@zu... <mailto: >> he...@zu...> >> >>>> <mailto:he...@zu... <mailto:he...@zu...>>>: >> >>>>> >> >>>>> Christian, >> >>>>> >> >>>>> The latest build is uploading now to the testing >> directory. >> >>>>> It should be complete about 30 minutes after I sent >> this email. >> >>>>> >> >>>>> Heiko >> >>>>> >> >>>>> Quoting Heiko Zuerker <he...@zu... <mailto: >> he...@zu...> >> >>>>> <mailto:he...@zu... >> <mailto:he...@zu...>>>: >> >>>>> >> >>>>>> Christian, >> >>>>>> >> >>>>>> All the missing python modules are now included. >> >>>>>> This turned out to be a bit more complicated, since I >> had >> >>>>>> to make some significant changes to how python modules >> get >> >>>>>> included. The new solution is much more flexible and >> will >> >>>>>> make it a lot easier to add python modules. (similar to >> >>>>>> how perl is handled). >> >>>>>> >> >>>>>> I'll upload a new testing release in the next couple >> of days. >> >>>>>> >> >>>>>> Heiko >> >>>>>> >> >>>>>> Quoting Ma poubelle <the...@gm... <mailto: >> the...@gm...> >> >>>>>> <mailto:the...@gm... >> <mailto:the...@gm...>>>: >> >>>>>> >> >>>>>>> Hello Heiko, >> >>>>>>> >> >>>>>>> Thanks for the update. We approach the goal. >> >>>>>>> >> >>>>>>> I think that misses some Python modules >> >>>>>>> >> >>>>>>> When I launch crm I get the following output >> >>>>>>> >> >>>>>>> >> >>>>>>> root@DL1:~ # crm >> >>>>>>> Fatal error: >> >>>>>>> No module named lxml >> >>>>>>> No module named modules >> >>>>>>> >> >>>>>>> Failed to start crmsh! This is likely due to >> a broken >> >>>>>>> installation or a missing dependency. >> >>>>>>> >> >>>>>>> If you are using a packaged version of >> crmsh, please try >> >>>>>>> reinstalling the package. Also check your >> PYTHONPATH and >> >>>>>>> make sure that the crmsh module is reachable. >> >>>>>>> >> >>>>>>> Please file an issue describing your >> installation at >> >>>>>>> https://github.com/Clusterlabs/crmsh/issues/ >> <https://github.com/Clusterlabs/crmsh/issues/> >> >>>>>>> <https://github.com/Clusterlabs/crmsh/issues/ >> <https://github.com/Clusterlabs/crmsh/issues/>> . >> >>>>>>> root@DL1:~ # >> >>>>>>> >> >>>>>>> >> >>>>>>> And when I launch pcs : >> >>>>>>> >> >>>>>>> root@DL1:~ # pcs >> >>>>>>> Traceback (most recent call last): >> >>>>>>> File "/usr/sbin/pcs", line 9, in <module> >> >>>>>>> load_entry_point('pcs==0.9.153', >> 'console_scripts', >> >>>>>>> 'pcs')() >> >>>>>>> File >> >>>>>>> >> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >> >>>>>>> line 519, in load_entry_point >> >>>>>>> return >> get_distribution(dist).load_entry_point(group, >> >>>>>>> name) >> >>>>>>> File >> >>>>>>> >> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >> >>>>>>> line 2630, in load_entry_point >> >>>>>>> return ep.load() >> >>>>>>> File >> >>>>>>> >> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >> >>>>>>> line 2310, in load >> >>>>>>> return self.resolve() >> >>>>>>> File >> >>>>>>> >> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >> >>>>>>> line 2316, in resolve >> >>>>>>> module = __import__(self.module_name, >> >>>>>>> fromlist=['__name__'], level=0) >> >>>>>>> File >> "/usr/lib/python2.7/site-packages/pcs/app.py", >> >>>>>>> line 14, in <module> >> >>>>>>> from pcs import ( >> >>>>>>> File >> "/usr/lib/python2.7/site-packages/pcs/acl.py", >> >>>>>>> line 10, in <module> >> >>>>>>> from pcs import ( >> >>>>>>> File >> "/usr/lib/python2.7/site-packages/pcs/prop.py", >> >>>>>>> line 13, in <module> >> >>>>>>> from pcs import utils >> >>>>>>> File >> "/usr/lib/python2.7/site-packages/pcs/utils.py", >> >>>>>>> line 65, in <module> >> >>>>>>> from pcs.lib.env import LibraryEnvironment >> >>>>>>> File >> "/usr/lib/python2.7/site-packages/pcs/lib/env.py", >> >>>>>>> line 8, in <module> >> >>>>>>> from lxml import etree >> >>>>>>> ImportError: No module named lxml >> >>>>>>> root@DL1:~ # >> >>>>>>> >> >>>>>>> Regards >> >>>>>>> >> >>>>>>> Christian >> >>>>>>> >> >>>>>>> >> >>>>>>> 2016-09-24 14:24 GMT+02:00 Heiko Zuerker >> >>>>>>> <he...@zu... <mailto:he...@zu...> >> <mailto:he...@zu... <mailto:he...@zu...>>>: >> >>>>>>> >> >>>>>>> _Sorry for the delay. The latest build is >> uploading now. >> >>>>>>> It should be done ~1 hour from the time I sent >> this >> >>>>>>> email._ >> >>>>>>> >> >>>>>>> >> >>>>>>> >> >>>>>>> _Heiko >> >>>>>>> >> >>>>>>> Quoting Heiko Zuerker <he...@zu... <mailto: >> he...@zu...> >> >>>>>>> <mailto:he...@zu... <mailto: >> he...@zu...>>>:_ >> >>>>>>> >> >>>>>>> >> >>>>>>> >> >>>>>>>> _They changes are in CVS. I don't think >> I'll be able >> >>>>>>>> to upload the nightly compile for at leat a few >> >>>>>>>> days. I'll get it done as soon as I can. >> >>>>>>>> >> >>>>>>>> Heiko >> >>>>>>>> >> >>>>>>>> Quoting Heiko Zuerker <he...@zu... >> <mailto:he...@zu...> >> >>>>>>>> <mailto:he...@zu... >> <mailto:he...@zu...>>>:_ >> >>>>>>>> >> >>>>>>>>> _Hey >> >>>>>>>>> >> >>>>>>>>> I'm hoping to get a chance on Saturday to work >> on >> >>>>>>>>> the missing components. Stay tuned for further >> >>>>>>>>> updates & sorry for being so slow. >> >>>>>>>>> >> >>>>>>>>> Heiko >> >>>>>>>>> >> >>>>>>>>> Quoting Ma poubelle <the...@gm... >> <mailto:the...@gm...> >> >>>>>>>>> <mailto:the...@gm... <mailto: >> the...@gm...>>>:_ >> >>>>>>>>> >> >>>>>>>>>> _Hi Heiko, _ >> >>>>>>>>>> _ _ >> >>>>>>>>>> _All the crm_... binaries is installed >> and work. _ >> >>>>>>>>>> _ _ >> >>>>>>>>>> _My request is about the crm from crmsh . The >> >>>>>>>>>> shell to interactively configure HA. >> >>>>>>>>>> https://github.com/ClusterLabs/crmsh >> <https://github.com/ClusterLabs/crmsh> >> >>>>>>>>>> <https://github.com/ClusterLabs/crmsh >> <https://github.com/ClusterLabs/crmsh>>_ >> >>>>>>>>>> _ _ >> >>>>>>>>>> _And other tools I like to use is pcs >> >>>>>>>>>> (Pacemaker/Corosync configuration system) >> >>>>>>>>>> https://github.com/ClusterLabs/pcs >> <https://github.com/ClusterLabs/pcs> >> >>>>>>>>>> <https://github.com/ClusterLabs/pcs >> <https://github.com/ClusterLabs/pcs>>_ >> >>>>>>>>>> _ _ >> >>>>>>>>>> _Can you integrate them on new rc ?_ >> >>>>>>>>>> _ _ >> >>>>>>>>>> _Kind Regards_ >> >>>>>>>>>> _ _ >> >>>>>>>>>> _ _ >> >>>>>>>>>> >> >>>>>>>>>> _2016-08-28 15:39 GMT+02:00 Heiko Zuerker >> >>>>>>>>>> <he...@zu... >> <mailto:he...@zu...> <mailto:he...@zu... >> <mailto:he...@zu...>>>:_ >> >>>>>>>>>> >> >>>>>>>>>> __Hey, >> >>>>>>>>>> >> >>>>>>>>>> I looked into this and all the crm binaries >> >>>>>>>>>> are there and corosync & pacemaker started >> for me. >> >>>>>>>>>> Do you have a specific error message you >> can >> >>>>>>>>>> share? >> >>>>>>>>>> Did you start with a vanilla config or are >> you >> >>>>>>>>>> upgrading something? >> >>>>>>>>>> >> >>>>>>>>>> Heiko >> >>>>>>>>>> >> >>>>>>>>>> Quoting Heiko Zuerker <he...@zu... >> <mailto:he...@zu...> >> >>>>>>>>>> <mailto:he...@zu... >> <mailto:he...@zu...>>>:__ >> >>>>>>>>>> >> >>>>>>>>>>> __Hi, >> >>>>>>>>>>> >> >>>>>>>>>>> I won't get a chance to look into this >> until >> >>>>>>>>>>> the weekend. >> >>>>>>>>>>> >> >>>>>>>>>>> Heiko >> >>>>>>>>>>> >> >>>>>>>>>>> Quoting Ma poubelle <the...@gm... >> <mailto:the...@gm...> >> >>>>>>>>>>> <mailto:the...@gm... <mailto: >> the...@gm...>>>:__ >> >>>>>>>>>>> >> >>>>>>>>>>>> __Hi, >> >>>>>>>>>>>> __ >> >>>>>>>>>>>> __I use the 1.8.0-rc2-2016-08-13-x86_64__ >> >>>>>>>>>>>> >> >>>>>>>>>>>> __I just try to start a cluster using >> >>>>>>>>>>>> corosync and pacemaker and i stop my >> test , >> >>>>>>>>>>>> cannot find the crm binary ! >> >>>>>>>>>>>> __ >> >>>>>>>>>>>> __Kind Regards__ >> >>>>>>>>>>>> >> >>>>>>>>>>>> >> >>>>>>>>>>>> __ __ >> >>>>>>>>>>> >> >>>>>>>>>>> >> >>>>>>>>>>> >> >>>>>>>>>>> __-- >> >>>>>>>>>>> >> >>>>>>>>>>> Regards >> >>>>>>>>>>> Heiko Zuerker >> >>>>>>>>>>> __ >> >>>>>>>>>> >> >>>>>>>>>> _ _ >> >>>>>>>>>> >> >>>>>>>>>> __-- >> >>>>>>>>>> >> >>>>>>>>>> Regards >> >>>>>>>>>> Heiko Zuerker >> >>>>>>>>>> __ >> >>>>>>>>>> >> >>>>>>>>>> __--------------------------- >> --------------------------------------------------- >> >>>>>>>>>> >> >>>>>>>>>> _____________________________ >> __________________ >> >>>>>>>>>> Devil-linux-discuss mailing list >> >>>>>>>>>> Dev...@li... >> <mailto:Dev...@li...> >> >>>>>>>>>> >> <mailto:Dev...@li... >> <mailto:Dev...@li...>> >> >>>>>>>>>> >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> > >> >>>>>>>>>> >> <https://lists.sourceforge.net/lists/listinfo/devil-linux- >> discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> >>_ >> >>>>>>>>>> _ >> >>>>>>>>>> >> >>>>>>>>> >> >>>>>>>>> >> >>>>>>>>> >> >>>>>>>>> _-- >> >>>>>>>>> >> >>>>>>>>> Regards >> >>>>>>>>> Heiko Zuerker >> >>>>>>>>> _ >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> _-- >> >>>>>>>> >> >>>>>>>> Regards >> >>>>>>>> Heiko Zuerker >> >>>>>>>> _ >> >>>>>>> >> >>>>>>> >> >>>>>>> >> >>>>>>> _-- >> >>>>>>> >> >>>>>>> Regards >> >>>>>>> Heiko Zuerker >> >>>>>>> _ >> >>>>>>> >> >>>>>>> _---------------------------- >> -------------------------------------------------- >> >>>>>>> >> >>>>>>> _______________________________________________ >> >>>>>>> Devil-linux-discuss mailing list >> >>>>>>> Dev...@li... >> <mailto:Dev...@li...> >> >>>>>>> >> <mailto:Dev...@li... >> <mailto:Dev...@li...>> >> >>>>>>> >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> > >> >>>>>>> >> <https://lists.sourceforge.net/lists/listinfo/devil-linux- >> discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> >>_ >> >>>>>>> >> >>>>>>> >> >>>>>> >> >>>>>> >> >>>>>> >> >>>>>> -- >> >>>>>> >> >>>>>> Regards >> >>>>>> Heiko Zuerker >> >>>>>> >> >>>>> >> >>>>> >> >>>>> >> >>>>> -- >> >>>>> >> >>>>> Regards >> >>>>> Heiko Zuerker >> >>>>> >> >>>> >> >>>> >> >>>> >> >>>> -- >> >>>> >> >>>> Regards >> >>>> Heiko Zuerker >> >>>> >> >>>> >> >>>> ----------------------------- >> ------------------------------------------------- >> >>>> Check out the vibrant tech community on one of the >> world's most >> >>>> engaging tech sites, SlashDot.org! >> http://sdm.link/slashdot >> >>>> _______________________________________________ >> >>>> Devil-linux-discuss mailing list >> >>>> Dev...@li... >> <mailto:Dev...@li...> >> >>>> <mailto:Dev...@li... >> <mailto:Dev...@li...>> >> >>>> >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> > >> >>>> <https://lists.sourceforge.ne >> t/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> >> >> >>>> >> >>>> >> >>>> >> >>>> >> >>>> ------------------------------------------------------------ >> ------------------ >> >>>> Check out the vibrant tech community on one of the world's >> most >> >>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >> >>>> >> >>>> >> >>>> _______________________________________________ >> >>>> Devil-linux-discuss mailing list >> >>>> Dev...@li... >> <mailto:Dev...@li...> >> >>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-dis >> cuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> > >> >>>> >> >>> >> >>> -- >> >>> >> >>> *Frank Weis* >> >>> Conseiller informaticien >> >>> >> >>> LE GOUVERNEMENT DU GRAND-DUCHÉ DE LUXEMBOURG >> >>> Ministère de l’Éducation nationale, de l’Enfance et de la >> Jeunesse >> >>> Centre de gestion informatique de l’éducation >> >>> >> >>> eduPôle - Walferdange >> >>> Route de Diekirch, L-7220 Walferdange >> >>> _Adresse postale_ : B.P. 98, L-7201 Bereldange >> >>> >> >>> Tél. : (+352) 247-85973 <tel:%28%2B352%29%20247-85973> . Fax : >> (+352) 247-85174 <tel:%28%2B352%29%20247-85174> >> >>> E-mail : Fra...@cg... <mailto:Fra...@cg...> >> <mailto:Fra...@cg... <mailto:Fra...@cg...>> >> >>> www.cgie.lu <http://www.cgie.lu> <http://www.cgie.lu/> >> >>> www.men.lu <http://www.men.lu> <http://www.men.lu/> >> >>> www.gouvernement.lu <http://www.gouvernement.lu> >> <http://www.gouvernement.lu> >> >>> >> >>> Ce message et toutes pièces jointes sont établis à l'intention >> >>> exclusive de ses destinataires. Ils peuvent contenir des >> >>> informations confidentielles. Si vous recevez ce message par >> >>> erreur, merci de le détruire et d'en avertir immédiatement >> >>> l'expéditeur. Toute utilisation de ce message non conforme à >> sa >> >>> destination, toute diffusion ou toute publication, totale ou >> >>> partielle, est interdite, sauf autorisation expresse. Ce >> message >> >>> a fait l'objet d'un traitement anti-virus. >> >>> >> >>> Le contenu de ce message et des pièces jointes ne pourrait >> >>> engager la responsabilité du ministère que s'il a été émis par >> >>> une personne dûment habilitée agissant dans le strict cadre >> des >> >>> fonctions auxquelles elle est employée et à des fins non >> >>> étrangères à ses attributions. >> >>> >> >> >> >> >> >> >> >> -- >> >> >> >> Regards >> >> Heiko Zuerker >> >> >> > >> > >> > >> > -- >> > >> > Regards >> > Heiko Zuerker >> > >> > >> > >> > ------------------------------------------------------------ >> ------------------ >> > >> > >> > >> > _______________________________________________ >> > Devil-linux-discuss mailing list >> > Dev...@li... >> <mailto:Dev...@li...> >> > https://lists.sourceforge.net/lists/listinfo/devil-linux-dis >> cuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> > >> > >> >> >> -- >> - cameron miller >> - Manager, Network and Systems Administration >> - http://staff.adams.edu/~cdmiller >> <http://staff.adams.edu/~cdmiller> >> >> ------------------------------------------------------------ >> ------------------ >> _______________________________________________ >> Devil-linux-discuss mailing list >> Dev...@li... >> <mailto:Dev...@li...> >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> > >> >> >> >> >> >> ------------------------------------------------------------ >> ------------------ >> >> >> >> _______________________________________________ >> Devil-linux-discuss mailing list >> Dev...@li... >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> >> -- >> - cameron miller >> - Manager, Network and Systems Administration >> - http://staff.adams.edu/~cdmiller >> >> ------------------------------------------------------------ >> ------------------ >> _______________________________________________ >> Devil-linux-discuss mailing list >> Dev...@li...://lists.sourc >> eforge.net/lists/listinfo/devil-linux-discuss >> >> >> >> >> -- >> >> Regards >> Heiko Zuerker >> >> >> ------------------------------------------------------------ >> ------------------ >> >> _______________________________________________ >> Devil-linux-discuss mailing list >> Dev...@li... >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> >> > |
