Menu
▾
▴
devil-linux-discuss
|
From: Heiko Z. <he...@zu...> - 2016-12-01 13:26:43
|
Fixed in CVS. Heiko Quoting Ma poubelle <the...@gm...>: > A small error occurs when entering : > corosync -v > > corosync: /lib64/libsqlite3.so: no version information available > (required by /lib64/libsoftokn3.so) > Corosync Cluster Engine, version 'UNKNOWN' > > > Regards > > > > 2016-11-30 15:15 GMT+01:00 Ma poubelle <the...@gm...>: > >> Another misconfig is in /etc/init.d/pacemaker_remote >> CONFIGNAME=COROSYNC >> >> must be >> >> CONFIGNAME=PACEMAKER_REMOTE >> >> >> Regards >> >> >> 2016-11-30 14:52 GMT+01:00 Heiko Zuerker <he...@zu...>: >> >>> _Thanks for checking. >>> Not sure when I'll get to fixing this. Might be a bit since I have >>> some other stuff going on. >>> >>> Heiko >>> >>> Quoting cdmiller <cdm...@ad...>:_ >>> >>>> _Definitely need those /usr/lib/ocf/resources.d/heartbeat scripts for >>>> fail over to function. >>>> >>>> In Debian/Ubuntu they are packaged in "resource-agents" >>>> https://packages.debian.org/sid/resource-agents >>>> >>>> Github: >>>> https://github.com/ClusterLabs/resource-agents >>>> >>>> - cameron >>>> >>>> On 11/29/2016 10:40 AM, Ma poubelle wrote: _ >>>>> _Hello, >>>>> >>>>> First test, the corosync is working, and pacemaker start. >>>>> >>>>> crm is working, the first problem i see is that is missing some RA >>>>> (ressources agent) >>>>> >>>>> located normally on /usr/lib/ocf/resources.d/heartbeat >>>>> >>>>> for me the missing files is IPaddr and IPaddr2 used to setup VIP ip >>>>> address >>>>> >>>>> I continue tomorrow. >>>>> >>>>> Kind Regards >>>>> >>>>> 2016-11-29 14:41 GMT+01:00 Ma poubelle <the...@gm... >>>>> <mailto:the...@gm...>>:[1] >>>>> >>>>> Hello, >>>>> >>>>> Due to too much work, I have suspended the tests with DL. >>>>> I just start again to setup a cluster using corosync and >>>>> pacemaker. Following the last mail, I understand that we cannot >>>>> use pcs but crm ! >>>>> I hope to finish soon and we are happy to have a new release ... >>>>> Regards >>>>> >>>>> 2016-11-29 0:24 GMT+01:00 cdmiller <cdm...@ad... >>>>> <mailto:cdm...@ad...>>:[2] >>>>> >>>>> Of corosync/pacemaker I have only used crm, not pcs. My >>>>> understanding is crm only relies on python. >>>>> >>>>> http://crmsh.nongnu.org/faq.html >>>>> <http://crmsh.nongnu.org/faq.html> >>>>> >>>>> Bottom of the old heartbeat page has a pararaph on crm and pcs: >>>>> http://www.linux-ha.org/wiki/Configuration >>>>> <http://www.linux-ha.org/wiki/Configuration> >>>>> >>>>> - cameron >>>>> >>>>> On 11/23/2016 12:48 PM, Heiko Zuerker wrote: >>>>> > All, >>>>> > >>>>> > Thoughts on this? I'd like to get to a point to >>>>> finally releasing DL >>>>> > 1.8 and this is the last open item. >>>>> > >>>>> > Heiko >>>>> > >>>>> > Quoting Heiko Zuerker <he...@zu... >>>>> <mailto:he...@zu...>[3] >>>>> <mailto:he...@zu... <mailto:he...@zu...>>>:[4] >>>>> > >>>>> >> All, >>>>> >> >>>>> >> Sounds like PCS needs ruby, which is not included in DL. >>>>> >> I really don't want to add that to DL. Can we get >>>>> away without PCS? >>>>> >> >>>>> >> Heiko >>>>> >> >>>>> >> Quoting Frank Weis <Fra...@cg... >>>>> <mailto:Fra...@cg...>[5] >>>>> <mailto:Fra...@cg... <mailto:Fra...@cg...>>>:[6] >>>>> >> >>>>> >>> Hi Christian, >>>>> >>> >>>>> >>> I try to get started with corosync/pacemaker on DL, >>>>> but I get the >>>>> >>> following kind of error: >>>>> >>> >>>>> >>> root@tunnelconcentrator:~ # pcs cluster auth pcmk-1 pcmk-2 >>>>> >>> No such file or directory >>>>> >>> Error: unable to locate command: /usr/bin/ruby >>>>> >>> root@tunnelconcentrator:~ # cat /etc/Devil-release >>>>> >>> Devil-Linux 1.8.0-rc2-2016-10-06-x86_64 >>>>> >>> >>>>> >>> I am familiar with heartbeat cluster on earlier devil-linux >>>>> >>> releases but I can't figure out how to get started here. >>>>> >>> >>>>> >>> Thanks and regards >>>>> >>> >>>>> >>> Frank >>>>> >>> >>>>> >>> >>>>> >>> On 2016-10-20 17:31, Ma poubelle wrote: >>>>> >>>> Hi Heiko, >>>>> >>>> >>>>> >>>> I currently testing the corosync & pacemaker. I don't have >>>>> >>>> anymore error message when using crm & pcs. But my >>>>> testing is >>>>> >>>> not finish. >>>>> >>>> >>>>> >>>> I keep you informed when done. >>>>> >>>> >>>>> >>>> Kind Regards >>>>> >>>> >>>>> >>>> Christian >>>>> >>>> >>>>> >>>> 2016-10-15 15:42 GMT+02:00 Heiko Zuerker >>>>> <he...@zu... <mailto:he...@zu...>[3] >>>>> >>>> <mailto:he...@zu... <mailto:he...@zu...>>>:[4] >>>>> >>>> >>>>> >>>> Christian, >>>>> >>>> >>>>> >>>> Did you get a chance to test if it works now? >>>>> >>>> >>>>> >>>> >>>>> >>>> >>>>> >>>> Heiko >>>>> >>>> >>>>> >>>> Quoting Heiko Zuerker <he...@zu... >>>>> <mailto:he...@zu...>[3] >>>>> >>>> <mailto:he...@zu... >>>>> <mailto:he...@zu...>>>:[4] >>>>> >>>>> >>>>> >>>>> Christian, >>>>> >>>>> >>>>> >>>>> The latest build is uploading now to the >>>>> testing directory. >>>>> >>>>> It should be complete about 30 minutes after I >>>>> sent this email. >>>>> >>>>> >>>>> >>>>> Heiko >>>>> >>>>> >>>>> >>>>> Quoting Heiko Zuerker <he...@zu... >>>>> <mailto:he...@zu...>[3] >>>>> >>>>> <mailto:he...@zu... >>>>> <mailto:he...@zu...>>>:[4] >>>>> >>>>> >>>>> >>>>>> Christian, >>>>> >>>>>> >>>>> >>>>>> All the missing python modules are now included. >>>>> >>>>>> This turned out to be a bit more complicated, >>>>> since I had >>>>> >>>>>> to make some significant changes to how >>>>> python modules get >>>>> >>>>>> included. The new solution is much more >>>>> flexible and will >>>>> >>>>>> make it a lot easier to add python modules. >>>>> (similar to >>>>> >>>>>> how perl is handled). >>>>> >>>>>> >>>>> >>>>>> I'll upload a new testing release in the next >>>>> couple of days. >>>>> >>>>>> >>>>> >>>>>> Heiko >>>>> >>>>>> >>>>> >>>>>> Quoting Ma poubelle <the...@gm... >>>>> <mailto:the...@gm...>[7] >>>>> >>>>>> <mailto:the...@gm... >>>>> <mailto:the...@gm...>>>:[8] >>>>> >>>>>> >>>>> >>>>>>> Hello Heiko, >>>>> >>>>>>> >>>>> >>>>>>> Thanks for the update. We approach the goal. >>>>> >>>>>>> >>>>> >>>>>>> I think that misses some Python modules >>>>> >>>>>>> >>>>> >>>>>>> When I launch crm I get the following output >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> root@DL1:~ # crm >>>>> >>>>>>> Fatal error: >>>>> >>>>>>> No module named lxml >>>>> >>>>>>> No module named modules >>>>> >>>>>>> >>>>> >>>>>>> Failed to start crmsh! This is likely due to >>>>> a broken >>>>> >>>>>>> installation or a missing dependency. >>>>> >>>>>>> >>>>> >>>>>>> If you are using a packaged version of >>>>> crmsh, please try >>>>> >>>>>>> reinstalling the package. Also check your >>>>> PYTHONPATH and >>>>> >>>>>>> make sure that the crmsh module is reachable. >>>>> >>>>>>> >>>>> >>>>>>> Please file an issue describing your >>>>> installation at >>>>> >>>>>>> https://github.com/Clusterlabs/crmsh/issues/ >>>>> <https://github.com/Clusterlabs/crmsh/issues/> >>>>> >>>>>>> <https://github.com/Clusterlabs/crmsh/issues/ >>>>> <https://github.com/Clusterlabs/crmsh/issues/>> . >>>>> >>>>>>> root@DL1:~ # >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> And when I launch pcs : >>>>> >>>>>>> >>>>> >>>>>>> root@DL1:~ # pcs >>>>> >>>>>>> Traceback (most recent call last): >>>>> >>>>>>> File "/usr/sbin/pcs", line 9, in <module> >>>>> >>>>>>> load_entry_point('pcs==0.9.153', >>>>> 'console_scripts', >>>>> >>>>>>> 'pcs')() >>>>> >>>>>>> File >>>>> >>>>>>> >>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>> >>>>>>> line 519, in load_entry_point >>>>> >>>>>>> return >>>>> get_distribution(dist).load_entry_point(group, >>>>> >>>>>>> name) >>>>> >>>>>>> File >>>>> >>>>>>> >>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>> >>>>>>> line 2630, in load_entry_point >>>>> >>>>>>> return ep.load() >>>>> >>>>>>> File >>>>> >>>>>>> >>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>> >>>>>>> line 2310, in load >>>>> >>>>>>> return self.resolve() >>>>> >>>>>>> File >>>>> >>>>>>> >>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>> >>>>>>> line 2316, in resolve >>>>> >>>>>>> module = __import__(self.module_name, >>>>> >>>>>>> fromlist=['__name__'], level=0) >>>>> >>>>>>> File >>>>> "/usr/lib/python2.7/site-packages/pcs/app.py", >>>>> >>>>>>> line 14, in <module> >>>>> >>>>>>> from pcs import ( >>>>> >>>>>>> File >>>>> "/usr/lib/python2.7/site-packages/pcs/acl.py", >>>>> >>>>>>> line 10, in <module> >>>>> >>>>>>> from pcs import ( >>>>> >>>>>>> File >>>>> "/usr/lib/python2.7/site-packages/pcs/prop.py", >>>>> >>>>>>> line 13, in <module> >>>>> >>>>>>> from pcs import utils >>>>> >>>>>>> File >>>>> "/usr/lib/python2.7/site-packages/pcs/utils.py", >>>>> >>>>>>> line 65, in <module> >>>>> >>>>>>> from pcs.lib.env import LibraryEnvironment >>>>> >>>>>>> File >>>>> "/usr/lib/python2.7/site-packages/pcs/lib/env.py", >>>>> >>>>>>> line 8, in <module> >>>>> >>>>>>> from lxml import etree >>>>> >>>>>>> ImportError: No module named lxml >>>>> >>>>>>> root@DL1:~ # >>>>> >>>>>>> >>>>> >>>>>>> Regards >>>>> >>>>>>> >>>>> >>>>>>> Christian >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> 2016-09-24 14:24 GMT+02:00 Heiko Zuerker >>>>> >>>>>>> <he...@zu... <mailto:he...@zu...>[3] >>>>> <mailto:he...@zu... <mailto:he...@zu...>>>:[4] >>>>> >>>>>>> >>>>> >>>>>>> _Sorry for the delay. The latest build is >>>>> uploading now. >>>>> >>>>>>> It should be done ~1 hour from the time >>>>> I sent this >>>>> >>>>>>> email._ >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> _Heiko >>>>> >>>>>>> >>>>> >>>>>>> Quoting Heiko Zuerker <he...@zu... >>>>> <mailto:he...@zu...>[3] >>>>> >>>>>>> <mailto:he...@zu... >>>>> <mailto:he...@zu...>>>:_[9] >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>>> _They changes are in CVS. I don't think >>>>> I'll be able >>>>> >>>>>>>> to upload the nightly compile for at leat a few >>>>> >>>>>>>> days. I'll get it done as soon as I can. >>>>> >>>>>>>> >>>>> >>>>>>>> Heiko >>>>> >>>>>>>> >>>>> >>>>>>>> Quoting Heiko Zuerker >>>>> <he...@zu... <mailto:he...@zu...>[3] >>>>> >>>>>>>> <mailto:he...@zu... >>>>> <mailto:he...@zu...>>>:_[9] >>>>> >>>>>>>> >>>>> >>>>>>>>> _Hey >>>>> >>>>>>>>> >>>>> >>>>>>>>> I'm hoping to get a chance on Saturday >>>>> to work on >>>>> >>>>>>>>> the missing components. Stay tuned for further >>>>> >>>>>>>>> updates & sorry for being so slow. >>>>> >>>>>>>>> >>>>> >>>>>>>>> Heiko >>>>> >>>>>>>>> >>>>> >>>>>>>>> Quoting Ma poubelle >>>>> <the...@gm... <mailto:the...@gm...>[7] >>>>> >>>>>>>>> <mailto:the...@gm... >>>>> <mailto:the...@gm...>>>:_[10] >>>>> >>>>>>>>> >>>>> >>>>>>>>>> _Hi Heiko, _ >>>>> >>>>>>>>>> _ _ >>>>> >>>>>>>>>> _All the crm_... binaries is installed >>>>> and work. _ >>>>> >>>>>>>>>> _ _ >>>>> >>>>>>>>>> _My request is about the crm from crmsh . The >>>>> >>>>>>>>>> shell to interactively configure HA. >>>>> >>>>>>>>>> https://github.com/ClusterLabs/crmsh >>>>> <https://github.com/ClusterLabs/crmsh> >>>>> >>>>>>>>>> <https://github.com/ClusterLabs/crmsh >>>>> <https://github.com/ClusterLabs/crmsh>>_ >>>>> >>>>>>>>>> _ _ >>>>> >>>>>>>>>> _And other tools I like to use is pcs >>>>> >>>>>>>>>> (Pacemaker/Corosync configuration system) >>>>> >>>>>>>>>> https://github.com/ClusterLabs/pcs >>>>> <https://github.com/ClusterLabs/pcs> >>>>> >>>>>>>>>> <https://github.com/ClusterLabs/pcs >>>>> <https://github.com/ClusterLabs/pcs>>_ >>>>> >>>>>>>>>> _ _ >>>>> >>>>>>>>>> _Can you integrate them on new rc ?_ >>>>> >>>>>>>>>> _ _ >>>>> >>>>>>>>>> _Kind Regards_ >>>>> >>>>>>>>>> _ _ >>>>> >>>>>>>>>> _ _ >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> _2016-08-28 15:39 GMT+02:00 Heiko Zuerker >>>>> >>>>>>>>>> <he...@zu... >>>>> <mailto:he...@zu...>[3] <mailto:he...@zu... >>>>> <mailto:he...@zu...>>>:_[9] >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> __Hey, >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> I looked into this and all the >>>>> crm binaries >>>>> >>>>>>>>>> are there and corosync & >>>>> pacemaker started for me. >>>>> >>>>>>>>>> Do you have a specific error >>>>> message you can >>>>> >>>>>>>>>> share? >>>>> >>>>>>>>>> Did you start with a vanilla >>>>> config or are you >>>>> >>>>>>>>>> upgrading something? >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> Heiko >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> Quoting Heiko Zuerker >>>>> <he...@zu... <mailto:he...@zu...>[3] >>>>> >>>>>>>>>> <mailto:he...@zu... >>>>> <mailto:he...@zu...>>>:__[11] >>>>> >>>>>>>>>> >>>>> >>>>>>>>>>> __Hi, >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> I won't get a chance to look >>>>> into this until >>>>> >>>>>>>>>>> the weekend. >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> Heiko >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> Quoting Ma poubelle >>>>> <the...@gm... <mailto:the...@gm...>[7] >>>>> >>>>>>>>>>> <mailto:the...@gm... >>>>> <mailto:the...@gm...>>>:__[12] >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>>> __Hi, >>>>> >>>>>>>>>>>> __ >>>>> >>>>>>>>>>>> __I use the >>>>> 1.8.0-rc2-2016-08-13-x86_64__ >>>>> >>>>>>>>>>>> >>>>> >>>>>>>>>>>> __I just try to start a cluster using >>>>> >>>>>>>>>>>> corosync and pacemaker and i >>>>> stop my test , >>>>> >>>>>>>>>>>> cannot find the crm binary ! >>>>> >>>>>>>>>>>> __ >>>>> >>>>>>>>>>>> __Kind Regards__ >>>>> >>>>>>>>>>>> >>>>> >>>>>>>>>>>> >>>>> >>>>>>>>>>>> __ __ >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> __-- >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> Regards >>>>> >>>>>>>>>>> Heiko Zuerker >>>>> >>>>>>>>>>> __ >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> _ _ >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> __-- >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> Regards >>>>> >>>>>>>>>> Heiko Zuerker >>>>> >>>>>>>>>> __ >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> >>>>> __------------------------------------------------------------------------------ >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> >>>>> _______________________________________________ >>>>> >>>>>>>>>> Devil-linux-discuss mailing list >>>>> >>>>>>>>>> Dev...@li... >>>>> <mailto:Dev...@li...>[13] >>>>> >>>>>>>>>> >>>>> <mailto:Dev...@li... >>>>> <mailto:Dev...@li...>>[14] >>>>> >>>>>>>>>> >>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>>> >>>>>>>>>> >>>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>>_ >>>>> >>>>>>>>>> _ >>>>> >>>>>>>>>> >>>>> >>>>>>>>> >>>>> >>>>>>>>> >>>>> >>>>>>>>> >>>>> >>>>>>>>> _-- >>>>> >>>>>>>>> >>>>> >>>>>>>>> Regards >>>>> >>>>>>>>> Heiko Zuerker >>>>> >>>>>>>>> _ >>>>> >>>>>>>> >>>>> >>>>>>>> >>>>> >>>>>>>> >>>>> >>>>>>>> _-- >>>>> >>>>>>>> >>>>> >>>>>>>> Regards >>>>> >>>>>>>> Heiko Zuerker >>>>> >>>>>>>> _ >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> _-- >>>>> >>>>>>> >>>>> >>>>>>> Regards >>>>> >>>>>>> Heiko Zuerker >>>>> >>>>>>> _ >>>>> >>>>>>> >>>>> >>>>>>> >>>>> _------------------------------------------------------------------------------ >>>>> >>>>>>> >>>>> >>>>>>> _______________________________________________ >>>>> >>>>>>> Devil-linux-discuss mailing list >>>>> >>>>>>> Dev...@li... >>>>> <mailto:Dev...@li...>[13] >>>>> >>>>>>> >>>>> <mailto:Dev...@li... >>>>> <mailto:Dev...@li...>>[14] >>>>> >>>>>>> >>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>>> >>>>>>> >>>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>>_ >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>> >>>>> >>>>>> >>>>> >>>>>> >>>>> >>>>>> -- >>>>> >>>>>> >>>>> >>>>>> Regards >>>>> >>>>>> Heiko Zuerker >>>>> >>>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> >>>>> >>>>> >>>>> Regards >>>>> >>>>> Heiko Zuerker >>>>> >>>>> >>>>> >>>> >>>>> >>>> >>>>> >>>> >>>>> >>>> -- >>>>> >>>> >>>>> >>>> Regards >>>>> >>>> Heiko Zuerker >>>>> >>>> >>>>> >>>> >>>>> >>>> >>>>> ------------------------------------------------------------------------------ >>>>> >>>> Check out the vibrant tech community on one of >>>>> the world's most >>>>> >>>> engaging tech sites, SlashDot.org! >>>>> http://sdm.link/slashdot >>>>> >>>> _______________________________________________ >>>>> >>>> Devil-linux-discuss mailing list >>>>> >>>> Dev...@li... >>>>> <mailto:Dev...@li...>[13] >>>>> >>>> <mailto:Dev...@li... >>>>> <mailto:Dev...@li...>>[14] >>>>> >>>> >>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>>> >>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>> >>>>> >>>> >>>>> >>>> >>>>> >>>> >>>>> >>>> >>>>> >>>> >>>>> ------------------------------------------------------------------------------ >>>>> >>>> Check out the vibrant tech community on one of the >>>>> world's most >>>>> >>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >>>>> >>>> >>>>> >>>> >>>>> >>>> _______________________________________________ >>>>> >>>> Devil-linux-discuss mailing list >>>>> >>>> Dev...@li... >>>>> <mailto:Dev...@li...>[13] >>>>> >>>> >>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>>> >>>> >>>>> >>> >>>>> >>> -- >>>>> >>> >>>>> >>> *Frank Weis* >>>>> >>> Conseiller informaticien >>>>> >>> >>>>> >>> LE GOUVERNEMENT DU GRAND-DUCHÉ DE LUXEMBOURG >>>>> >>> Ministère de l’Éducation nationale, de l’Enfance et >>>>> de la Jeunesse >>>>> >>> Centre de gestion informatique de l’éducation >>>>> >>> >>>>> >>> eduPôle - Walferdange >>>>> >>> Route de Diekirch, L-7220 Walferdange >>>>> >>> _Adresse postale_ : B.P. 98, L-7201 Bereldange >>>>> >>> >>>>> >>> Tél. : (+352) 247-85973 >>>>> <tel:%28%2B352%29%20247-85973> . Fax : >>>>> (+352) 247-85174 <tel:%28%2B352%29%20247-85174> >>>>> >>> E-mail : Fra...@cg... <mailto:Fra...@cg...>[5] >>>>> <mailto:Fra...@cg... <mailto:Fra...@cg...>>[15] >>>>> >>> www.cgie.lu[16] <http://www.cgie.lu> <http://www.cgie.lu/> >>>>> >>> www.men.lu[17] <http://www.men.lu> <http://www.men.lu/> >>>>> >>> www.gouvernement.lu[18] <http://www.gouvernement.lu> >>>>> <http://www.gouvernement.lu> >>>>> >>> >>>>> >>> Ce message et toutes pièces jointes sont établis à >>>>> l'intention >>>>> >>> exclusive de ses destinataires. Ils peuvent contenir des >>>>> >>> informations confidentielles. Si vous recevez ce message par >>>>> >>> erreur, merci de le détruire et d'en avertir immédiatement >>>>> >>> l'expéditeur. Toute utilisation de ce message non >>>>> conforme à sa >>>>> >>> destination, toute diffusion ou toute publication, totale ou >>>>> >>> partielle, est interdite, sauf autorisation >>>>> expresse. Ce message >>>>> >>> a fait l'objet d'un traitement anti-virus. >>>>> >>> >>>>> >>> Le contenu de ce message et des pièces jointes ne pourrait >>>>> >>> engager la responsabilité du ministère que s'il a >>>>> été émis par >>>>> >>> une personne dûment habilitée agissant dans le >>>>> strict cadre des >>>>> >>> fonctions auxquelles elle est employée et à des fins non >>>>> >>> étrangères à ses attributions. >>>>> >>> >>>>> >> >>>>> >> >>>>> >> >>>>> >> -- >>>>> >> >>>>> >> Regards >>>>> >> Heiko Zuerker >>>>> >> >>>>> > >>>>> > >>>>> > >>>>> > -- >>>>> > >>>>> > Regards >>>>> > Heiko Zuerker >>>>> > >>>>> > >>>>> > >>>>> > >>>>> ------------------------------------------------------------------------------ >>>>> > >>>>> > >>>>> > >>>>> > _______________________________________________ >>>>> > Devil-linux-discuss mailing list >>>>> > Dev...@li... >>>>> <mailto:Dev...@li...>[13] >>>>> > >>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>>> > >>>>> >>>>> -- >>>>> - cameron miller >>>>> - Manager, Network and Systems Administration >>>>> - http://staff.adams.edu/~cdmiller >>>>> <http://staff.adams.edu/~cdmiller> >>>>> >>>>> >>>>> ------------------------------------------------------------------------------ >>>>> _______________________________________________ >>>>> Devil-linux-discuss mailing list >>>>> Dev...@li... >>>>> <mailto:Dev...@li...>[13] >>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>>> >>>>> ------------------------------------------------------------------------------ >>>>> >>>>> _______________________________________________ >>>>> Devil-linux-discuss mailing list >>>>> Dev...@li... >>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss_ >>>> >>>> _-- >>>> - cameron miller >>>> - Manager, Network and Systems Administration >>>> - http://staff.adams.edu/~cdmiller >>>> >>>> ------------------------------------------------------------------------------ >>>> _______________________________________________ >>>> Devil-linux-discuss mailing list_ >>>> >>>> _De...@li...://lists.sourceforge.net/lists/listinfo/devil-linux-discuss[19]_ >>> >>> >>> _-- >>> >>> Regards >>> Heiko Zuerker >>> _ >>> >>> _------------------------------------------------------------------------------ >>> >>> _______________________________________________ >>> Devil-linux-discuss mailing list >>> Dev...@li... >>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss_ >>> Links: ------ [1] mailto:the...@gm...%3E%3E: [2] mailto:cdm...@ad...%3E%3E: [3] mailto:he...@zu...%3E [4] mailto:he...@zu...%3E%3E%3E: [5] mailto:Fra...@cg...%3E [6] mailto:Fra...@cg...%3E%3E%3E: [7] mailto:the...@gm...%3E [8] mailto:the...@gm...%3E%3E%3E: [9] mailto:he...@zu...%3E%3E%3E:_ [10] mailto:the...@gm...%3E%3E%3E:_ [11] mailto:he...@zu...%3E%3E%3E:__ [12] mailto:the...@gm...%3E%3E%3E:__ [13] mailto:Dev...@li...%3E [14] mailto:Dev...@li...%3E%3E [15] mailto:Fra...@cg...%3E%3E [16] http://www.cgie.lu [17] http://www.men.lu [18] http://www.gouvernement.lu [19] -- Regards Heiko Zuerker ... [truncated message content] |
|
From: Heiko Z. <he...@zu...> - 2016-12-17 23:20:10
|
It's added to CVS. I'm pretty sure the init script needs fixing... I'll upload it on Sunday if the nightly compile finishes successfully. Heiko Quoting Heiko Zuerker <he...@zu...>: > Thanks for checking. > Not sure when I'll get to fixing this. Might be a bit since I have > some other stuff going on. > > Heiko > > Quoting cdmiller <cdm...@ad...>: > >> Definitely need those /usr/lib/ocf/resources.d/heartbeat scripts for >> fail over to function. >> >> In Debian/Ubuntu they are packaged in "resource-agents" >> https://packages.debian.org/sid/resource-agents >> >> Github: >> https://github.com/ClusterLabs/resource-agents >> >> - cameron >> >> On 11/29/2016 10:40 AM, Ma poubelle wrote: >>> Hello, >>> >>> First test, the corosync is working, and pacemaker start. >>> >>> crm is working, the first problem i see is that is missing some RA >>> (ressources agent) >>> >>> located normally on /usr/lib/ocf/resources.d/heartbeat >>> >>> for me the missing files is IPaddr and IPaddr2 used to setup VIP ip >>> address >>> >>> I continue tomorrow. >>> >>> Kind Regards >>> >>> 2016-11-29 14:41 GMT+01:00 Ma poubelle <the...@gm... >>> <mailto:the...@gm...>>: >>> >>> Hello, >>> >>> Due to too much work, I have suspended the tests with DL. >>> I just start again to setup a cluster using corosync and >>> pacemaker. Following the last mail, I understand that we cannot >>> use pcs but crm ! >>> I hope to finish soon and we are happy to have a new release ... >>> Regards >>> >>> 2016-11-29 0:24 GMT+01:00 cdmiller <cdm...@ad... >>> <mailto:cdm...@ad...>>: >>> >>> Of corosync/pacemaker I have only used crm, not pcs. My >>> understanding is crm only relies on python. >>> >>> http://crmsh.nongnu.org/faq.html >>> <http://crmsh.nongnu.org/faq.html> >>> >>> Bottom of the old heartbeat page has a pararaph on crm and pcs: >>> http://www.linux-ha.org/wiki/Configuration >>> <http://www.linux-ha.org/wiki/Configuration> >>> >>> - cameron >>> >>> On 11/23/2016 12:48 PM, Heiko Zuerker wrote: >>> > All, >>> > >>> > Thoughts on this? I'd like to get to a point to finally >>> releasing DL >>> > 1.8 and this is the last open item. >>> > >>> > Heiko >>> > >>> > Quoting Heiko Zuerker <he...@zu... >>> <mailto:he...@zu...> >>> <mailto:he...@zu... <mailto:he...@zu...>>>: >>> > >>> >> All, >>> >> >>> >> Sounds like PCS needs ruby, which is not included in DL. >>> >> I really don't want to add that to DL. Can we get away >>> without PCS? >>> >> >>> >> Heiko >>> >> >>> >> Quoting Frank Weis <Fra...@cg... >>> <mailto:Fra...@cg...> >>> <mailto:Fra...@cg... <mailto:Fra...@cg...>>>: >>> >> >>> >>> Hi Christian, >>> >>> >>> >>> I try to get started with corosync/pacemaker on DL, >>> but I get the >>> >>> following kind of error: >>> >>> >>> >>> root@tunnelconcentrator:~ # pcs cluster auth pcmk-1 pcmk-2 >>> >>> No such file or directory >>> >>> Error: unable to locate command: /usr/bin/ruby >>> >>> root@tunnelconcentrator:~ # cat /etc/Devil-release >>> >>> Devil-Linux 1.8.0-rc2-2016-10-06-x86_64 >>> >>> >>> >>> I am familiar with heartbeat cluster on earlier devil-linux >>> >>> releases but I can't figure out how to get started here. >>> >>> >>> >>> Thanks and regards >>> >>> >>> >>> Frank >>> >>> >>> >>> >>> >>> On 2016-10-20 17:31, Ma poubelle wrote: >>> >>>> Hi Heiko, >>> >>>> >>> >>>> I currently testing the corosync & pacemaker. I don't have >>> >>>> anymore error message when using crm & pcs. But my testing is >>> >>>> not finish. >>> >>>> >>> >>>> I keep you informed when done. >>> >>>> >>> >>>> Kind Regards >>> >>>> >>> >>>> Christian >>> >>>> >>> >>>> 2016-10-15 15:42 GMT+02:00 Heiko Zuerker >>> <he...@zu... <mailto:he...@zu...> >>> >>>> <mailto:he...@zu... <mailto:he...@zu...>>>: >>> >>>> >>> >>>> Christian, >>> >>>> >>> >>>> Did you get a chance to test if it works now? >>> >>>> >>> >>>> >>> >>>> >>> >>>> Heiko >>> >>>> >>> >>>> Quoting Heiko Zuerker <he...@zu... >>> <mailto:he...@zu...> >>> >>>> <mailto:he...@zu... <mailto:he...@zu...>>>: >>> >>>>> >>> >>>>> Christian, >>> >>>>> >>> >>>>> The latest build is uploading now to the testing >>> directory. >>> >>>>> It should be complete about 30 minutes after I >>> sent this email. >>> >>>>> >>> >>>>> Heiko >>> >>>>> >>> >>>>> Quoting Heiko Zuerker <he...@zu... >>> <mailto:he...@zu...> >>> >>>>> <mailto:he...@zu... >>> <mailto:he...@zu...>>>: >>> >>>>> >>> >>>>>> Christian, >>> >>>>>> >>> >>>>>> All the missing python modules are now included. >>> >>>>>> This turned out to be a bit more complicated, >>> since I had >>> >>>>>> to make some significant changes to how python >>> modules get >>> >>>>>> included. The new solution is much more >>> flexible and will >>> >>>>>> make it a lot easier to add python modules. (similar to >>> >>>>>> how perl is handled). >>> >>>>>> >>> >>>>>> I'll upload a new testing release in the next >>> couple of days. >>> >>>>>> >>> >>>>>> Heiko >>> >>>>>> >>> >>>>>> Quoting Ma poubelle <the...@gm... >>> <mailto:the...@gm...> >>> >>>>>> <mailto:the...@gm... >>> <mailto:the...@gm...>>>: >>> >>>>>> >>> >>>>>>> Hello Heiko, >>> >>>>>>> >>> >>>>>>> Thanks for the update. We approach the goal. >>> >>>>>>> >>> >>>>>>> I think that misses some Python modules >>> >>>>>>> >>> >>>>>>> When I launch crm I get the following output >>> >>>>>>> >>> >>>>>>> >>> >>>>>>> root@DL1:~ # crm >>> >>>>>>> Fatal error: >>> >>>>>>> No module named lxml >>> >>>>>>> No module named modules >>> >>>>>>> >>> >>>>>>> Failed to start crmsh! This is likely due to >>> a broken >>> >>>>>>> installation or a missing dependency. >>> >>>>>>> >>> >>>>>>> If you are using a packaged version of >>> crmsh, please try >>> >>>>>>> reinstalling the package. Also check your >>> PYTHONPATH and >>> >>>>>>> make sure that the crmsh module is reachable. >>> >>>>>>> >>> >>>>>>> Please file an issue describing your >>> installation at >>> >>>>>>> https://github.com/Clusterlabs/crmsh/issues/ >>> <https://github.com/Clusterlabs/crmsh/issues/> >>> >>>>>>> <https://github.com/Clusterlabs/crmsh/issues/ >>> <https://github.com/Clusterlabs/crmsh/issues/>> . >>> >>>>>>> root@DL1:~ # >>> >>>>>>> >>> >>>>>>> >>> >>>>>>> And when I launch pcs : >>> >>>>>>> >>> >>>>>>> root@DL1:~ # pcs >>> >>>>>>> Traceback (most recent call last): >>> >>>>>>> File "/usr/sbin/pcs", line 9, in <module> >>> >>>>>>> load_entry_point('pcs==0.9.153', >>> 'console_scripts', >>> >>>>>>> 'pcs')() >>> >>>>>>> File >>> >>>>>>> >>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>> >>>>>>> line 519, in load_entry_point >>> >>>>>>> return >>> get_distribution(dist).load_entry_point(group, >>> >>>>>>> name) >>> >>>>>>> File >>> >>>>>>> >>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>> >>>>>>> line 2630, in load_entry_point >>> >>>>>>> return ep.load() >>> >>>>>>> File >>> >>>>>>> >>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>> >>>>>>> line 2310, in load >>> >>>>>>> return self.resolve() >>> >>>>>>> File >>> >>>>>>> >>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>> >>>>>>> line 2316, in resolve >>> >>>>>>> module = __import__(self.module_name, >>> >>>>>>> fromlist=['__name__'], level=0) >>> >>>>>>> File >>> "/usr/lib/python2.7/site-packages/pcs/app.py", >>> >>>>>>> line 14, in <module> >>> >>>>>>> from pcs import ( >>> >>>>>>> File >>> "/usr/lib/python2.7/site-packages/pcs/acl.py", >>> >>>>>>> line 10, in <module> >>> >>>>>>> from pcs import ( >>> >>>>>>> File >>> "/usr/lib/python2.7/site-packages/pcs/prop.py", >>> >>>>>>> line 13, in <module> >>> >>>>>>> from pcs import utils >>> >>>>>>> File >>> "/usr/lib/python2.7/site-packages/pcs/utils.py", >>> >>>>>>> line 65, in <module> >>> >>>>>>> from pcs.lib.env import LibraryEnvironment >>> >>>>>>> File >>> "/usr/lib/python2.7/site-packages/pcs/lib/env.py", >>> >>>>>>> line 8, in <module> >>> >>>>>>> from lxml import etree >>> >>>>>>> ImportError: No module named lxml >>> >>>>>>> root@DL1:~ # >>> >>>>>>> >>> >>>>>>> Regards >>> >>>>>>> >>> >>>>>>> Christian >>> >>>>>>> >>> >>>>>>> >>> >>>>>>> 2016-09-24 14:24 GMT+02:00 Heiko Zuerker >>> >>>>>>> <he...@zu... <mailto:he...@zu...> >>> <mailto:he...@zu... <mailto:he...@zu...>>>: >>> >>>>>>> >>> >>>>>>> _Sorry for the delay. The latest build is >>> uploading now. >>> >>>>>>> It should be done ~1 hour from the time I sent this >>> >>>>>>> email._ >>> >>>>>>> >>> >>>>>>> >>> >>>>>>> >>> >>>>>>> _Heiko >>> >>>>>>> >>> >>>>>>> Quoting Heiko Zuerker <he...@zu... >>> <mailto:he...@zu...> >>> >>>>>>> <mailto:he...@zu... >>> <mailto:he...@zu...>>>:_ >>> >>>>>>> >>> >>>>>>> >>> >>>>>>> >>> >>>>>>>> _They changes are in CVS. I don't think >>> I'll be able >>> >>>>>>>> to upload the nightly compile for at leat a few >>> >>>>>>>> days. I'll get it done as soon as I can. >>> >>>>>>>> >>> >>>>>>>> Heiko >>> >>>>>>>> >>> >>>>>>>> Quoting Heiko Zuerker <he...@zu... >>> <mailto:he...@zu...> >>> >>>>>>>> <mailto:he...@zu... >>> <mailto:he...@zu...>>>:_ >>> >>>>>>>> >>> >>>>>>>>> _Hey >>> >>>>>>>>> >>> >>>>>>>>> I'm hoping to get a chance on Saturday to work on >>> >>>>>>>>> the missing components. Stay tuned for further >>> >>>>>>>>> updates & sorry for being so slow. >>> >>>>>>>>> >>> >>>>>>>>> Heiko >>> >>>>>>>>> >>> >>>>>>>>> Quoting Ma poubelle >>> <the...@gm... <mailto:the...@gm...> >>> >>>>>>>>> <mailto:the...@gm... >>> <mailto:the...@gm...>>>:_ >>> >>>>>>>>> >>> >>>>>>>>>> _Hi Heiko, _ >>> >>>>>>>>>> _ _ >>> >>>>>>>>>> _All the crm_... binaries is installed >>> and work. _ >>> >>>>>>>>>> _ _ >>> >>>>>>>>>> _My request is about the crm from crmsh . The >>> >>>>>>>>>> shell to interactively configure HA. >>> >>>>>>>>>> https://github.com/ClusterLabs/crmsh >>> <https://github.com/ClusterLabs/crmsh> >>> >>>>>>>>>> <https://github.com/ClusterLabs/crmsh >>> <https://github.com/ClusterLabs/crmsh>>_ >>> >>>>>>>>>> _ _ >>> >>>>>>>>>> _And other tools I like to use is pcs >>> >>>>>>>>>> (Pacemaker/Corosync configuration system) >>> >>>>>>>>>> https://github.com/ClusterLabs/pcs >>> <https://github.com/ClusterLabs/pcs> >>> >>>>>>>>>> <https://github.com/ClusterLabs/pcs >>> <https://github.com/ClusterLabs/pcs>>_ >>> >>>>>>>>>> _ _ >>> >>>>>>>>>> _Can you integrate them on new rc ?_ >>> >>>>>>>>>> _ _ >>> >>>>>>>>>> _Kind Regards_ >>> >>>>>>>>>> _ _ >>> >>>>>>>>>> _ _ >>> >>>>>>>>>> >>> >>>>>>>>>> _2016-08-28 15:39 GMT+02:00 Heiko Zuerker >>> >>>>>>>>>> <he...@zu... >>> <mailto:he...@zu...> <mailto:he...@zu... >>> <mailto:he...@zu...>>>:_ >>> >>>>>>>>>> >>> >>>>>>>>>> __Hey, >>> >>>>>>>>>> >>> >>>>>>>>>> I looked into this and all the crm binaries >>> >>>>>>>>>> are there and corosync & pacemaker >>> started for me. >>> >>>>>>>>>> Do you have a specific error message you can >>> >>>>>>>>>> share? >>> >>>>>>>>>> Did you start with a vanilla config >>> or are you >>> >>>>>>>>>> upgrading something? >>> >>>>>>>>>> >>> >>>>>>>>>> Heiko >>> >>>>>>>>>> >>> >>>>>>>>>> Quoting Heiko Zuerker >>> <he...@zu... <mailto:he...@zu...> >>> >>>>>>>>>> <mailto:he...@zu... >>> <mailto:he...@zu...>>>:__ >>> >>>>>>>>>> >>> >>>>>>>>>>> __Hi, >>> >>>>>>>>>>> >>> >>>>>>>>>>> I won't get a chance to look into >>> this until >>> >>>>>>>>>>> the weekend. >>> >>>>>>>>>>> >>> >>>>>>>>>>> Heiko >>> >>>>>>>>>>> >>> >>>>>>>>>>> Quoting Ma poubelle >>> <the...@gm... <mailto:the...@gm...> >>> >>>>>>>>>>> <mailto:the...@gm... >>> <mailto:the...@gm...>>>:__ >>> >>>>>>>>>>> >>> >>>>>>>>>>>> __Hi, >>> >>>>>>>>>>>> __ >>> >>>>>>>>>>>> __I use the 1.8.0-rc2-2016-08-13-x86_64__ >>> >>>>>>>>>>>> >>> >>>>>>>>>>>> __I just try to start a cluster using >>> >>>>>>>>>>>> corosync and pacemaker and i stop >>> my test , >>> >>>>>>>>>>>> cannot find the crm binary ! >>> >>>>>>>>>>>> __ >>> >>>>>>>>>>>> __Kind Regards__ >>> >>>>>>>>>>>> >>> >>>>>>>>>>>> >>> >>>>>>>>>>>> __ __ >>> >>>>>>>>>>> >>> >>>>>>>>>>> >>> >>>>>>>>>>> >>> >>>>>>>>>>> __-- >>> >>>>>>>>>>> >>> >>>>>>>>>>> Regards >>> >>>>>>>>>>> Heiko Zuerker >>> >>>>>>>>>>> __ >>> >>>>>>>>>> >>> >>>>>>>>>> _ _ >>> >>>>>>>>>> >>> >>>>>>>>>> __-- >>> >>>>>>>>>> >>> >>>>>>>>>> Regards >>> >>>>>>>>>> Heiko Zuerker >>> >>>>>>>>>> __ >>> >>>>>>>>>> >>> >>>>>>>>>> >>> __------------------------------------------------------------------------------ >>> >>>>>>>>>> >>> >>>>>>>>>> >>> _______________________________________________ >>> >>>>>>>>>> Devil-linux-discuss mailing list >>> >>>>>>>>>> Dev...@li... >>> <mailto:Dev...@li...> >>> >>>>>>>>>> >>> <mailto:Dev...@li... >>> <mailto:Dev...@li...>> >>> >>>>>>>>>> >>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>> >>>>>>>>>> >>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>> >>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>>_ >>> >>>>>>>>>> _ >>> >>>>>>>>>> >>> >>>>>>>>> >>> >>>>>>>>> >>> >>>>>>>>> >>> >>>>>>>>> _-- >>> >>>>>>>>> >>> >>>>>>>>> Regards >>> >>>>>>>>> Heiko Zuerker >>> >>>>>>>>> _ >>> >>>>>>>> >>> >>>>>>>> >>> >>>>>>>> >>> >>>>>>>> _-- >>> >>>>>>>> >>> >>>>>>>> Regards >>> >>>>>>>> Heiko Zuerker >>> >>>>>>>> _ >>> >>>>>>> >>> >>>>>>> >>> >>>>>>> >>> >>>>>>> _-- >>> >>>>>>> >>> >>>>>>> Regards >>> >>>>>>> Heiko Zuerker >>> >>>>>>> _ >>> >>>>>>> >>> >>>>>>> >>> _------------------------------------------------------------------------------ >>> >>>>>>> >>> >>>>>>> _______________________________________________ >>> >>>>>>> Devil-linux-discuss mailing list >>> >>>>>>> Dev...@li... >>> <mailto:Dev...@li...> >>> >>>>>>> >>> <mailto:Dev...@li... >>> <mailto:Dev...@li...>> >>> >>>>>>> >>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>> >>>>>>> >>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>> >>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>>_ >>> >>>>>>> >>> >>>>>>> >>> >>>>>> >>> >>>>>> >>> >>>>>> >>> >>>>>> -- >>> >>>>>> >>> >>>>>> Regards >>> >>>>>> Heiko Zuerker >>> >>>>>> >>> >>>>> >>> >>>>> >>> >>>>> >>> >>>>> -- >>> >>>>> >>> >>>>> Regards >>> >>>>> Heiko Zuerker >>> >>>>> >>> >>>> >>> >>>> >>> >>>> >>> >>>> -- >>> >>>> >>> >>>> Regards >>> >>>> Heiko Zuerker >>> >>>> >>> >>>> >>> >>>> >>> ------------------------------------------------------------------------------ >>> >>>> Check out the vibrant tech community on one of >>> the world's most >>> >>>> engaging tech sites, SlashDot.org! >>> http://sdm.link/slashdot >>> >>>> _______________________________________________ >>> >>>> Devil-linux-discuss mailing list >>> >>>> Dev...@li... >>> <mailto:Dev...@li...> >>> >>>> <mailto:Dev...@li... >>> <mailto:Dev...@li...>> >>> >>>> >>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>> >>>> >>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>> >>> >>>> >>> >>>> >>> >>>> >>> >>>> >>> >>>> >>> ------------------------------------------------------------------------------ >>> >>>> Check out the vibrant tech community on one of the >>> world's most >>> >>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >>> >>>> >>> >>>> >>> >>>> _______________________________________________ >>> >>>> Devil-linux-discuss mailing list >>> >>>> Dev...@li... >>> <mailto:Dev...@li...> >>> >>>> >>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>> >>>> >>> >>> >>> >>> -- >>> >>> >>> >>> *Frank Weis* >>> >>> Conseiller informaticien >>> >>> >>> >>> LE GOUVERNEMENT DU GRAND-DUCHÉ DE LUXEMBOURG >>> >>> Ministère de l’Éducation nationale, de l’Enfance et de >>> la Jeunesse >>> >>> Centre de gestion informatique de l’éducation >>> >>> >>> >>> eduPôle - Walferdange >>> >>> Route de Diekirch, L-7220 Walferdange >>> >>> _Adresse postale_ : B.P. 98, L-7201 Bereldange >>> >>> >>> >>> Tél. : (+352) 247-85973 <tel:%28%2B352%29%20247-85973> . Fax : >>> (+352) 247-85174 <tel:%28%2B352%29%20247-85174> >>> >>> E-mail : Fra...@cg... <mailto:Fra...@cg...> >>> <mailto:Fra...@cg... <mailto:Fra...@cg...>> >>> >>> www.cgie.lu[1] <http://www.cgie.lu> <http://www.cgie.lu/> >>> >>> www.men.lu[2] <http://www.men.lu> <http://www.men.lu/> >>> >>> www.gouvernement.lu[3] <http://www.gouvernement.lu> >>> <http://www.gouvernement.lu> >>> >>> >>> >>> Ce message et toutes pièces jointes sont établis à l'intention >>> >>> exclusive de ses destinataires. Ils peuvent contenir des >>> >>> informations confidentielles. Si vous recevez ce message par >>> >>> erreur, merci de le détruire et d'en avertir immédiatement >>> >>> l'expéditeur. Toute utilisation de ce message non conforme à sa >>> >>> destination, toute diffusion ou toute publication, totale ou >>> >>> partielle, est interdite, sauf autorisation expresse. >>> Ce message >>> >>> a fait l'objet d'un traitement anti-virus. >>> >>> >>> >>> Le contenu de ce message et des pièces jointes ne pourrait >>> >>> engager la responsabilité du ministère que s'il a été émis par >>> >>> une personne dûment habilitée agissant dans le strict cadre des >>> >>> fonctions auxquelles elle est employée et à des fins non >>> >>> étrangères à ses attributions. >>> >>> >>> >> >>> >> >>> >> >>> >> -- >>> >> >>> >> Regards >>> >> Heiko Zuerker >>> >> >>> > >>> > >>> > >>> > -- >>> > >>> > Regards >>> > Heiko Zuerker >>> > >>> > >>> > >>> > >>> ------------------------------------------------------------------------------ >>> > >>> > >>> > >>> > _______________________________________________ >>> > Devil-linux-discuss mailing list >>> > Dev...@li... >>> <mailto:Dev...@li...> >>> > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>> > >>> >>> -- >>> - cameron miller >>> - Manager, Network and Systems Administration >>> - http://staff.adams.edu/~cdmiller >>> <http://staff.adams.edu/~cdmiller> >>> >>> >>> ------------------------------------------------------------------------------ >>> _______________________________________________ >>> Devil-linux-discuss mailing list >>> Dev...@li... >>> <mailto:Dev...@li...> >>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>> >>> ------------------------------------------------------------------------------ >>> >>> _______________________________________________ >>> Devil-linux-discuss mailing list >>> Dev...@li... >>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> >> -- >> - cameron miller >> - Manager, Network and Systems Administration >> - http://staff.adams.edu/~cdmiller >> >> ------------------------------------------------------------------------------ >> _______________________________________________ >> Devil-linux-discuss mailing list >> Dev...@li...://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > > > -- > > Regards > Heiko Zuerker > Links: ------ [1] http://www.cgie.lu [2] http://www.men.lu [3] http://www.gouvernement.lu -- Regards Heiko Zuerker |
|
From: Ma p. <the...@gm...> - 2016-12-23 14:54:38
|
Hello Heiko, I don't find the new testing release ... in any repository Merry Christmas Christian 2016-12-18 0:19 GMT+01:00 Heiko Zuerker <he...@zu...>: > It's added to CVS. I'm pretty sure the init script needs fixing... > I'll upload it on Sunday if the nightly compile finishes successfully. > > Heiko > > Quoting Heiko Zuerker <he...@zu...>: > > Thanks for checking. > Not sure when I'll get to fixing this. Might be a bit since I have some > other stuff going on. > > Heiko > > Quoting cdmiller <cdm...@ad...>: > > Definitely need those /usr/lib/ocf/resources.d/heartbeat scripts for > fail over to function. > > In Debian/Ubuntu they are packaged in "resource-agents" > https://packages.debian.org/sid/resource-agents > > Github: > https://github.com/ClusterLabs/resource-agents > > - cameron > > On 11/29/2016 10:40 AM, Ma poubelle wrote: > > Hello, > > First test, the corosync is working, and pacemaker start. > > crm is working, the first problem i see is that is missing some RA > (ressources agent) > > located normally on /usr/lib/ocf/resources.d/heartbeat > > for me the missing files is IPaddr and IPaddr2 used to setup VIP ip > address > > I continue tomorrow. > > Kind Regards > > 2016-11-29 14:41 GMT+01:00 Ma poubelle <the...@gm... > <mailto:the...@gm...>>: > > Hello, > > Due to too much work, I have suspended the tests with DL. > I just start again to setup a cluster using corosync and > pacemaker. Following the last mail, I understand that we cannot > use pcs but crm ! > I hope to finish soon and we are happy to have a new release ... > Regards > > > 2016-11-29 0:24 GMT+01:00 cdmiller <cdm...@ad... > <mailto:cdm...@ad...>>: > > Of corosync/pacemaker I have only used crm, not pcs. My > understanding is crm only relies on python. > > http://crmsh.nongnu.org/faq.html > <http://crmsh.nongnu.org/faq.html> > > Bottom of the old heartbeat page has a pararaph on crm and pcs: > http://www.linux-ha.org/wiki/Configuration > <http://www.linux-ha.org/wiki/Configuration> > > - cameron > > On 11/23/2016 12:48 PM, Heiko Zuerker wrote: > > All, > > > > Thoughts on this? I'd like to get to a point to finally > releasing DL > > 1.8 and this is the last open item. > > > > Heiko > > > > Quoting Heiko Zuerker <he...@zu... <mailto: > he...@zu...> > <mailto:he...@zu... <mailto:he...@zu...>>>: > > > >> All, > >> > >> Sounds like PCS needs ruby, which is not included in DL. > >> I really don't want to add that to DL. Can we get away without > PCS? > >> > >> Heiko > >> > >> Quoting Frank Weis <Fra...@cg... <mailto: > Fra...@cg...> > <mailto:Fra...@cg... <mailto:Fra...@cg...>>>: > >> > >>> Hi Christian, > >>> > >>> I try to get started with corosync/pacemaker on DL, but I get > the > >>> following kind of error: > >>> > >>> root@tunnelconcentrator:~ # pcs cluster auth pcmk-1 pcmk-2 > >>> No such file or directory > >>> Error: unable to locate command: /usr/bin/ruby > >>> root@tunnelconcentrator:~ # cat /etc/Devil-release > >>> Devil-Linux 1.8.0-rc2-2016-10-06-x86_64 > >>> > >>> I am familiar with heartbeat cluster on earlier devil-linux > >>> releases but I can't figure out how to get started here. > >>> > >>> Thanks and regards > >>> > >>> Frank > >>> > >>> > >>> On 2016-10-20 17:31, Ma poubelle wrote: > >>>> Hi Heiko, > >>>> > >>>> I currently testing the corosync & pacemaker. I don't have > >>>> anymore error message when using crm & pcs. But my testing is > >>>> not finish. > >>>> > >>>> I keep you informed when done. > >>>> > >>>> Kind Regards > >>>> > >>>> Christian > >>>> > >>>> 2016-10-15 15:42 GMT+02:00 Heiko Zuerker <he...@zu... > <mailto:he...@zu...> > >>>> <mailto:he...@zu... <mailto:he...@zu...>>>: > >>>> > >>>> Christian, > >>>> > >>>> Did you get a chance to test if it works now? > >>>> > >>>> > >>>> > >>>> Heiko > >>>> > >>>> Quoting Heiko Zuerker <he...@zu... <mailto: > he...@zu...> > >>>> <mailto:he...@zu... <mailto:he...@zu...>>>: > >>>>> > >>>>> Christian, > >>>>> > >>>>> The latest build is uploading now to the testing > directory. > >>>>> It should be complete about 30 minutes after I sent this > email. > >>>>> > >>>>> Heiko > >>>>> > >>>>> Quoting Heiko Zuerker <he...@zu... <mailto: > he...@zu...> > >>>>> <mailto:he...@zu... > <mailto:he...@zu...>>>: > >>>>> > >>>>>> Christian, > >>>>>> > >>>>>> All the missing python modules are now included. > >>>>>> This turned out to be a bit more complicated, since I > had > >>>>>> to make some significant changes to how python modules > get > >>>>>> included. The new solution is much more flexible and > will > >>>>>> make it a lot easier to add python modules. (similar to > >>>>>> how perl is handled). > >>>>>> > >>>>>> I'll upload a new testing release in the next couple of > days. > >>>>>> > >>>>>> Heiko > >>>>>> > >>>>>> Quoting Ma poubelle <the...@gm... <mailto: > the...@gm...> > >>>>>> <mailto:the...@gm... > <mailto:the...@gm...>>>: > >>>>>> > >>>>>>> Hello Heiko, > >>>>>>> > >>>>>>> Thanks for the update. We approach the goal. > >>>>>>> > >>>>>>> I think that misses some Python modules > >>>>>>> > >>>>>>> When I launch crm I get the following output > >>>>>>> > >>>>>>> > >>>>>>> root@DL1:~ # crm > >>>>>>> Fatal error: > >>>>>>> No module named lxml > >>>>>>> No module named modules > >>>>>>> > >>>>>>> Failed to start crmsh! This is likely due to > a broken > >>>>>>> installation or a missing dependency. > >>>>>>> > >>>>>>> If you are using a packaged version of > crmsh, please try > >>>>>>> reinstalling the package. Also check your > PYTHONPATH and > >>>>>>> make sure that the crmsh module is reachable. > >>>>>>> > >>>>>>> Please file an issue describing your > installation at > >>>>>>> https://github.com/Clusterlabs/crmsh/issues/ > <https://github.com/Clusterlabs/crmsh/issues/> > >>>>>>> <https://github.com/Clusterlabs/crmsh/issues/ > <https://github.com/Clusterlabs/crmsh/issues/>> . > >>>>>>> root@DL1:~ # > >>>>>>> > >>>>>>> > >>>>>>> And when I launch pcs : > >>>>>>> > >>>>>>> root@DL1:~ # pcs > >>>>>>> Traceback (most recent call last): > >>>>>>> File "/usr/sbin/pcs", line 9, in <module> > >>>>>>> load_entry_point('pcs==0.9.153', > 'console_scripts', > >>>>>>> 'pcs')() > >>>>>>> File > >>>>>>> > "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", > >>>>>>> line 519, in load_entry_point > >>>>>>> return > get_distribution(dist).load_entry_point(group, > >>>>>>> name) > >>>>>>> File > >>>>>>> > "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", > >>>>>>> line 2630, in load_entry_point > >>>>>>> return ep.load() > >>>>>>> File > >>>>>>> > "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", > >>>>>>> line 2310, in load > >>>>>>> return self.resolve() > >>>>>>> File > >>>>>>> > "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", > >>>>>>> line 2316, in resolve > >>>>>>> module = __import__(self.module_name, > >>>>>>> fromlist=['__name__'], level=0) > >>>>>>> File > "/usr/lib/python2.7/site-packages/pcs/app.py", > >>>>>>> line 14, in <module> > >>>>>>> from pcs import ( > >>>>>>> File > "/usr/lib/python2.7/site-packages/pcs/acl.py", > >>>>>>> line 10, in <module> > >>>>>>> from pcs import ( > >>>>>>> File > "/usr/lib/python2.7/site-packages/pcs/prop.py", > >>>>>>> line 13, in <module> > >>>>>>> from pcs import utils > >>>>>>> File > "/usr/lib/python2.7/site-packages/pcs/utils.py", > >>>>>>> line 65, in <module> > >>>>>>> from pcs.lib.env import LibraryEnvironment > >>>>>>> File > "/usr/lib/python2.7/site-packages/pcs/lib/env.py", > >>>>>>> line 8, in <module> > >>>>>>> from lxml import etree > >>>>>>> ImportError: No module named lxml > >>>>>>> root@DL1:~ # > >>>>>>> > >>>>>>> Regards > >>>>>>> > >>>>>>> Christian > >>>>>>> > >>>>>>> > >>>>>>> 2016-09-24 14:24 GMT+02:00 Heiko Zuerker > >>>>>>> <he...@zu... <mailto:he...@zu...> > <mailto:he...@zu... <mailto:he...@zu...>>>: > >>>>>>> > >>>>>>> _Sorry for the delay. The latest build is > uploading now. > >>>>>>> It should be done ~1 hour from the time I sent this > >>>>>>> email._ > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> _Heiko > >>>>>>> > >>>>>>> Quoting Heiko Zuerker <he...@zu... <mailto: > he...@zu...> > >>>>>>> <mailto:he...@zu... <mailto: > he...@zu...>>>:_ > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>>> _They changes are in CVS. I don't think > I'll be able > >>>>>>>> to upload the nightly compile for at leat a few > >>>>>>>> days. I'll get it done as soon as I can. > >>>>>>>> > >>>>>>>> Heiko > >>>>>>>> > >>>>>>>> Quoting Heiko Zuerker <he...@zu... <mailto: > he...@zu...> > >>>>>>>> <mailto:he...@zu... > <mailto:he...@zu...>>>:_ > >>>>>>>> > >>>>>>>>> _Hey > >>>>>>>>> > >>>>>>>>> I'm hoping to get a chance on Saturday to work on > >>>>>>>>> the missing components. Stay tuned for further > >>>>>>>>> updates & sorry for being so slow. > >>>>>>>>> > >>>>>>>>> Heiko > >>>>>>>>> > >>>>>>>>> Quoting Ma poubelle <the...@gm... > <mailto:the...@gm...> > >>>>>>>>> <mailto:the...@gm... <mailto: > the...@gm...>>>:_ > >>>>>>>>> > >>>>>>>>>> _Hi Heiko, _ > >>>>>>>>>> _ _ > >>>>>>>>>> _All the crm_... binaries is installed > and work. _ > >>>>>>>>>> _ _ > >>>>>>>>>> _My request is about the crm from crmsh . The > >>>>>>>>>> shell to interactively configure HA. > >>>>>>>>>> https://github.com/ClusterLabs/crmsh > <https://github.com/ClusterLabs/crmsh> > >>>>>>>>>> <https://github.com/ClusterLabs/crmsh > <https://github.com/ClusterLabs/crmsh>>_ > >>>>>>>>>> _ _ > >>>>>>>>>> _And other tools I like to use is pcs > >>>>>>>>>> (Pacemaker/Corosync configuration system) > >>>>>>>>>> https://github.com/ClusterLabs/pcs > <https://github.com/ClusterLabs/pcs> > >>>>>>>>>> <https://github.com/ClusterLabs/pcs > <https://github.com/ClusterLabs/pcs>>_ > >>>>>>>>>> _ _ > >>>>>>>>>> _Can you integrate them on new rc ?_ > >>>>>>>>>> _ _ > >>>>>>>>>> _Kind Regards_ > >>>>>>>>>> _ _ > >>>>>>>>>> _ _ > >>>>>>>>>> > >>>>>>>>>> _2016-08-28 15:39 GMT+02:00 Heiko Zuerker > >>>>>>>>>> <he...@zu... > <mailto:he...@zu...> <mailto:he...@zu... > <mailto:he...@zu...>>>:_ > >>>>>>>>>> > >>>>>>>>>> __Hey, > >>>>>>>>>> > >>>>>>>>>> I looked into this and all the crm binaries > >>>>>>>>>> are there and corosync & pacemaker started > for me. > >>>>>>>>>> Do you have a specific error message you can > >>>>>>>>>> share? > >>>>>>>>>> Did you start with a vanilla config or are > you > >>>>>>>>>> upgrading something? > >>>>>>>>>> > >>>>>>>>>> Heiko > >>>>>>>>>> > >>>>>>>>>> Quoting Heiko Zuerker <he...@zu... > <mailto:he...@zu...> > >>>>>>>>>> <mailto:he...@zu... > <mailto:he...@zu...>>>:__ > >>>>>>>>>> > >>>>>>>>>>> __Hi, > >>>>>>>>>>> > >>>>>>>>>>> I won't get a chance to look into this > until > >>>>>>>>>>> the weekend. > >>>>>>>>>>> > >>>>>>>>>>> Heiko > >>>>>>>>>>> > >>>>>>>>>>> Quoting Ma poubelle <the...@gm... > <mailto:the...@gm...> > >>>>>>>>>>> <mailto:the...@gm... <mailto: > the...@gm...>>>:__ > >>>>>>>>>>> > >>>>>>>>>>>> __Hi, > >>>>>>>>>>>> __ > >>>>>>>>>>>> __I use the 1.8.0-rc2-2016-08-13-x86_64__ > >>>>>>>>>>>> > >>>>>>>>>>>> __I just try to start a cluster using > >>>>>>>>>>>> corosync and pacemaker and i stop my test > , > >>>>>>>>>>>> cannot find the crm binary ! > >>>>>>>>>>>> __ > >>>>>>>>>>>> __Kind Regards__ > >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>> __ __ > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> __-- > >>>>>>>>>>> > >>>>>>>>>>> Regards > >>>>>>>>>>> Heiko Zuerker > >>>>>>>>>>> __ > >>>>>>>>>> > >>>>>>>>>> _ _ > >>>>>>>>>> > >>>>>>>>>> __-- > >>>>>>>>>> > >>>>>>>>>> Regards > >>>>>>>>>> Heiko Zuerker > >>>>>>>>>> __ > >>>>>>>>>> > >>>>>>>>>> __--------------------------- > --------------------------------------------------- > >>>>>>>>>> > >>>>>>>>>> _____________________________ > __________________ > >>>>>>>>>> Devil-linux-discuss mailing list > >>>>>>>>>> Dev...@li... > <mailto:Dev...@li...> > >>>>>>>>>> > <mailto:Dev...@li... > <mailto:Dev...@li...>> > >>>>>>>>>> > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> > >>>>>>>>>> > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > >>_ > >>>>>>>>>> _ > >>>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> _-- > >>>>>>>>> > >>>>>>>>> Regards > >>>>>>>>> Heiko Zuerker > >>>>>>>>> _ > >>>>>>>> > >>>>>>>> > >>>>>>>> > >>>>>>>> _-- > >>>>>>>> > >>>>>>>> Regards > >>>>>>>> Heiko Zuerker > >>>>>>>> _ > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> _-- > >>>>>>> > >>>>>>> Regards > >>>>>>> Heiko Zuerker > >>>>>>> _ > >>>>>>> > >>>>>>> _---------------------------- > -------------------------------------------------- > >>>>>>> > >>>>>>> _______________________________________________ > >>>>>>> Devil-linux-discuss mailing list > >>>>>>> Dev...@li... > <mailto:Dev...@li...> > >>>>>>> > <mailto:Dev...@li... > <mailto:Dev...@li...>> > >>>>>>> > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> > >>>>>>> > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > >>_ > >>>>>>> > >>>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> -- > >>>>>> > >>>>>> Regards > >>>>>> Heiko Zuerker > >>>>>> > >>>>> > >>>>> > >>>>> > >>>>> -- > >>>>> > >>>>> Regards > >>>>> Heiko Zuerker > >>>>> > >>>> > >>>> > >>>> > >>>> -- > >>>> > >>>> Regards > >>>> Heiko Zuerker > >>>> > >>>> > >>>> ----------------------------- > ------------------------------------------------- > >>>> Check out the vibrant tech community on one of the > world's most > >>>> engaging tech sites, SlashDot.org! > http://sdm.link/slashdot > >>>> _______________________________________________ > >>>> Devil-linux-discuss mailing list > >>>> Dev...@li... > <mailto:Dev...@li...> > >>>> <mailto:Dev...@li... > <mailto:Dev...@li...>> > >>>> > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> > >>>> <https://lists.sourceforge.net/lists/listinfo/devil- > linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > >> > >>>> > >>>> > >>>> > >>>> > >>>> ------------------------------------------------------------ > ------------------ > >>>> Check out the vibrant tech community on one of the world's > most > >>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot > >>>> > >>>> > >>>> _______________________________________________ > >>>> Devil-linux-discuss mailing list > >>>> Dev...@li... > <mailto:Dev...@li...> > >>>> https://lists.sourceforge.net/lists/listinfo/devil-linux- > discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> > >>>> > >>> > >>> -- > >>> > >>> *Frank Weis* > >>> Conseiller informaticien > >>> > >>> LE GOUVERNEMENT DU GRAND-DUCHÉ DE LUXEMBOURG > >>> Ministère de l’Éducation nationale, de l’Enfance et de la > Jeunesse > >>> Centre de gestion informatique de l’éducation > >>> > >>> eduPôle - Walferdange > >>> Route de Diekirch, L-7220 Walferdange > >>> _Adresse postale_ : B.P. 98, L-7201 Bereldange > >>> > >>> Tél. : (+352) 247-85973 <tel:%28%2B352%29%20247-85973> . Fax : > (+352) 247-85174 <tel:%28%2B352%29%20247-85174> > >>> E-mail : Fra...@cg... <mailto:Fra...@cg...> > <mailto:Fra...@cg... <mailto:Fra...@cg...>> > >>> www.cgie.lu <http://www.cgie.lu> <http://www.cgie.lu/> > >>> www.men.lu <http://www.men.lu> <http://www.men.lu/> > >>> www.gouvernement.lu <http://www.gouvernement.lu> > <http://www.gouvernement.lu> > >>> > >>> Ce message et toutes pièces jointes sont établis à l'intention > >>> exclusive de ses destinataires. Ils peuvent contenir des > >>> informations confidentielles. Si vous recevez ce message par > >>> erreur, merci de le détruire et d'en avertir immédiatement > >>> l'expéditeur. Toute utilisation de ce message non conforme à sa > >>> destination, toute diffusion ou toute publication, totale ou > >>> partielle, est interdite, sauf autorisation expresse. Ce > message > >>> a fait l'objet d'un traitement anti-virus. > >>> > >>> Le contenu de ce message et des pièces jointes ne pourrait > >>> engager la responsabilité du ministère que s'il a été émis par > >>> une personne dûment habilitée agissant dans le strict cadre des > >>> fonctions auxquelles elle est employée et à des fins non > >>> étrangères à ses attributions. > >>> > >> > >> > >> > >> -- > >> > >> Regards > >> Heiko Zuerker > >> > > > > > > > > -- > > > > Regards > > Heiko Zuerker > > > > > > > > ------------------------------------------------------------ > ------------------ > > > > > > > > _______________________________________________ > > Devil-linux-discuss mailing list > > Dev...@li... > <mailto:Dev...@li...> > > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> > > > > > -- > - cameron miller > - Manager, Network and Systems Administration > - http://staff.adams.edu/~cdmiller > <http://staff.adams.edu/~cdmiller> > > ------------------------------------------------------------ > ------------------ > _______________________________________________ > Devil-linux-discuss mailing list > Dev...@li... > <mailto:Dev...@li...> > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> > > > > > > ------------------------------------------------------------ > ------------------ > > > > _______________________________________________ > Devil-linux-discuss mailing list > Dev...@li... > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > > -- > - cameron miller > - Manager, Network and Systems Administration > - http://staff.adams.edu/~cdmiller > > ------------------------------------------------------------ > ------------------ > _______________________________________________ > Devil-linux-discuss mailing list > Dev...@li...://lists. > sourceforge.net/lists/listinfo/devil-linux-discuss > > > > > -- > > Regards > Heiko Zuerker > > > > > > -- > > Regards > Heiko Zuerker > > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > Devil-linux-discuss mailing list > Dev...@li... > https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss > > |
|
From: Heiko Z. <he...@zu...> - 2016-12-23 15:58:42
|
Christian, Yeah that's my fault. Something broke with the nightly build I haven't gotten a chance yet to fix it. Stay tuned for further updates Heiko Quoting Ma poubelle <the...@gm...>: > Hello Heiko, > I don't find the new testing release ... in any repository > > Merry Christmas > > Christian > > > 2016-12-18 0:19 GMT+01:00 Heiko Zuerker <he...@zu...>: > >> _It's added to CVS. I'm pretty sure the init script needs fixing... >> I'll upload it on Sunday if the nightly compile finishes successfully. >> >> Heiko >> >> Quoting Heiko Zuerker <he...@zu...>:_ >> >>> _Thanks for checking. >>> Not sure when I'll get to fixing this. Might be a bit since I have >>> some other stuff going on. >>> >>> Heiko >>> >>> Quoting cdmiller <cdm...@ad...>:_ >>> >>>> _Definitely need those /usr/lib/ocf/resources.d/heartbeat scripts for >>>> fail over to function. >>>> >>>> In Debian/Ubuntu they are packaged in "resource-agents" >>>> https://packages.debian.org/sid/resource-agents >>>> >>>> Github: >>>> https://github.com/ClusterLabs/resource-agents >>>> >>>> - cameron >>>> >>>> On 11/29/2016 10:40 AM, Ma poubelle wrote: _ >>>>> _Hello, >>>>> >>>>> First test, the corosync is working, and pacemaker start. >>>>> >>>>> crm is working, the first problem i see is that is missing some RA >>>>> (ressources agent) >>>>> >>>>> located normally on /usr/lib/ocf/resources.d/heartbeat >>>>> >>>>> for me the missing files is IPaddr and IPaddr2 used to setup VIP ip >>>>> address >>>>> >>>>> I continue tomorrow. >>>>> >>>>> Kind Regards >>>>> >>>>> 2016-11-29 14:41 GMT+01:00 Ma poubelle <the...@gm... >>>>> <mailto:the...@gm...>>:[1] >>>>> >>>>> Hello, >>>>> >>>>> Due to too much work, I have suspended the tests with DL. >>>>> I just start again to setup a cluster using corosync and >>>>> pacemaker. Following the last mail, I understand that we cannot >>>>> use pcs but crm ! >>>>> I hope to finish soon and we are happy to have a new release ... >>>>> Regards >>>>> >>>>> 2016-11-29 0:24 GMT+01:00 cdmiller <cdm...@ad... >>>>> <mailto:cdm...@ad...>>:[2] >>>>> >>>>> Of corosync/pacemaker I have only used crm, not pcs. My >>>>> understanding is crm only relies on python. >>>>> >>>>> http://crmsh.nongnu.org/faq.html >>>>> <http://crmsh.nongnu.org/faq.html> >>>>> >>>>> Bottom of the old heartbeat page has a pararaph on crm and pcs: >>>>> http://www.linux-ha.org/wiki/Configuration >>>>> <http://www.linux-ha.org/wiki/Configuration> >>>>> >>>>> - cameron >>>>> >>>>> On 11/23/2016 12:48 PM, Heiko Zuerker wrote: >>>>> > All, >>>>> > >>>>> > Thoughts on this? I'd like to get to a point to >>>>> finally releasing DL >>>>> > 1.8 and this is the last open item. >>>>> > >>>>> > Heiko >>>>> > >>>>> > Quoting Heiko Zuerker <he...@zu... >>>>> <mailto:he...@zu...>[3] >>>>> <mailto:he...@zu... <mailto:he...@zu...>>>:[4] >>>>> > >>>>> >> All, >>>>> >> >>>>> >> Sounds like PCS needs ruby, which is not included in DL. >>>>> >> I really don't want to add that to DL. Can we get >>>>> away without PCS? >>>>> >> >>>>> >> Heiko >>>>> >> >>>>> >> Quoting Frank Weis <Fra...@cg... >>>>> <mailto:Fra...@cg...>[5] >>>>> <mailto:Fra...@cg... <mailto:Fra...@cg...>>>:[6] >>>>> >> >>>>> >>> Hi Christian, >>>>> >>> >>>>> >>> I try to get started with corosync/pacemaker on DL, >>>>> but I get the >>>>> >>> following kind of error: >>>>> >>> >>>>> >>> root@tunnelconcentrator:~ # pcs cluster auth pcmk-1 pcmk-2 >>>>> >>> No such file or directory >>>>> >>> Error: unable to locate command: /usr/bin/ruby >>>>> >>> root@tunnelconcentrator:~ # cat /etc/Devil-release >>>>> >>> Devil-Linux 1.8.0-rc2-2016-10-06-x86_64 >>>>> >>> >>>>> >>> I am familiar with heartbeat cluster on earlier devil-linux >>>>> >>> releases but I can't figure out how to get started here. >>>>> >>> >>>>> >>> Thanks and regards >>>>> >>> >>>>> >>> Frank >>>>> >>> >>>>> >>> >>>>> >>> On 2016-10-20 17:31, Ma poubelle wrote: >>>>> >>>> Hi Heiko, >>>>> >>>> >>>>> >>>> I currently testing the corosync & pacemaker. I don't have >>>>> >>>> anymore error message when using crm & pcs. But my >>>>> testing is >>>>> >>>> not finish. >>>>> >>>> >>>>> >>>> I keep you informed when done. >>>>> >>>> >>>>> >>>> Kind Regards >>>>> >>>> >>>>> >>>> Christian >>>>> >>>> >>>>> >>>> 2016-10-15 15:42 GMT+02:00 Heiko Zuerker >>>>> <he...@zu... <mailto:he...@zu...>[3] >>>>> >>>> <mailto:he...@zu... <mailto:he...@zu...>>>:[4] >>>>> >>>> >>>>> >>>> Christian, >>>>> >>>> >>>>> >>>> Did you get a chance to test if it works now? >>>>> >>>> >>>>> >>>> >>>>> >>>> >>>>> >>>> Heiko >>>>> >>>> >>>>> >>>> Quoting Heiko Zuerker <he...@zu... >>>>> <mailto:he...@zu...>[3] >>>>> >>>> <mailto:he...@zu... >>>>> <mailto:he...@zu...>>>:[4] >>>>> >>>>> >>>>> >>>>> Christian, >>>>> >>>>> >>>>> >>>>> The latest build is uploading now to the >>>>> testing directory. >>>>> >>>>> It should be complete about 30 minutes after I >>>>> sent this email. >>>>> >>>>> >>>>> >>>>> Heiko >>>>> >>>>> >>>>> >>>>> Quoting Heiko Zuerker <he...@zu... >>>>> <mailto:he...@zu...>[3] >>>>> >>>>> <mailto:he...@zu... >>>>> <mailto:he...@zu...>>>:[4] >>>>> >>>>> >>>>> >>>>>> Christian, >>>>> >>>>>> >>>>> >>>>>> All the missing python modules are now included. >>>>> >>>>>> This turned out to be a bit more complicated, >>>>> since I had >>>>> >>>>>> to make some significant changes to how >>>>> python modules get >>>>> >>>>>> included. The new solution is much more >>>>> flexible and will >>>>> >>>>>> make it a lot easier to add python modules. >>>>> (similar to >>>>> >>>>>> how perl is handled). >>>>> >>>>>> >>>>> >>>>>> I'll upload a new testing release in the next >>>>> couple of days. >>>>> >>>>>> >>>>> >>>>>> Heiko >>>>> >>>>>> >>>>> >>>>>> Quoting Ma poubelle <the...@gm... >>>>> <mailto:the...@gm...>[7] >>>>> >>>>>> <mailto:the...@gm... >>>>> <mailto:the...@gm...>>>:[8] >>>>> >>>>>> >>>>> >>>>>>> Hello Heiko, >>>>> >>>>>>> >>>>> >>>>>>> Thanks for the update. We approach the goal. >>>>> >>>>>>> >>>>> >>>>>>> I think that misses some Python modules >>>>> >>>>>>> >>>>> >>>>>>> When I launch crm I get the following output >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> root@DL1:~ # crm >>>>> >>>>>>> Fatal error: >>>>> >>>>>>> No module named lxml >>>>> >>>>>>> No module named modules >>>>> >>>>>>> >>>>> >>>>>>> Failed to start crmsh! This is likely due to >>>>> a broken >>>>> >>>>>>> installation or a missing dependency. >>>>> >>>>>>> >>>>> >>>>>>> If you are using a packaged version of >>>>> crmsh, please try >>>>> >>>>>>> reinstalling the package. Also check your >>>>> PYTHONPATH and >>>>> >>>>>>> make sure that the crmsh module is reachable. >>>>> >>>>>>> >>>>> >>>>>>> Please file an issue describing your >>>>> installation at >>>>> >>>>>>> https://github.com/Clusterlabs/crmsh/issues/ >>>>> <https://github.com/Clusterlabs/crmsh/issues/> >>>>> >>>>>>> <https://github.com/Clusterlabs/crmsh/issues/ >>>>> <https://github.com/Clusterlabs/crmsh/issues/>> . >>>>> >>>>>>> root@DL1:~ # >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> And when I launch pcs : >>>>> >>>>>>> >>>>> >>>>>>> root@DL1:~ # pcs >>>>> >>>>>>> Traceback (most recent call last): >>>>> >>>>>>> File "/usr/sbin/pcs", line 9, in <module> >>>>> >>>>>>> load_entry_point('pcs==0.9.153', >>>>> 'console_scripts', >>>>> >>>>>>> 'pcs')() >>>>> >>>>>>> File >>>>> >>>>>>> >>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>> >>>>>>> line 519, in load_entry_point >>>>> >>>>>>> return >>>>> get_distribution(dist).load_entry_point(group, >>>>> >>>>>>> name) >>>>> >>>>>>> File >>>>> >>>>>>> >>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>> >>>>>>> line 2630, in load_entry_point >>>>> >>>>>>> return ep.load() >>>>> >>>>>>> File >>>>> >>>>>>> >>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>> >>>>>>> line 2310, in load >>>>> >>>>>>> return self.resolve() >>>>> >>>>>>> File >>>>> >>>>>>> >>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>> >>>>>>> line 2316, in resolve >>>>> >>>>>>> module = __import__(self.module_name, >>>>> >>>>>>> fromlist=['__name__'], level=0) >>>>> >>>>>>> File >>>>> "/usr/lib/python2.7/site-packages/pcs/app.py", >>>>> >>>>>>> line 14, in <module> >>>>> >>>>>>> from pcs import ( >>>>> >>>>>>> File >>>>> "/usr/lib/python2.7/site-packages/pcs/acl.py", >>>>> >>>>>>> line 10, in <module> >>>>> >>>>>>> from pcs import ( >>>>> >>>>>>> File >>>>> "/usr/lib/python2.7/site-packages/pcs/prop.py", >>>>> >>>>>>> line 13, in <module> >>>>> >>>>>>> from pcs import utils >>>>> >>>>>>> File >>>>> "/usr/lib/python2.7/site-packages/pcs/utils.py", >>>>> >>>>>>> line 65, in <module> >>>>> >>>>>>> from pcs.lib.env import LibraryEnvironment >>>>> >>>>>>> File >>>>> "/usr/lib/python2.7/site-packages/pcs/lib/env.py", >>>>> >>>>>>> line 8, in <module> >>>>> >>>>>>> from lxml import etree >>>>> >>>>>>> ImportError: No module named lxml >>>>> >>>>>>> root@DL1:~ # >>>>> >>>>>>> >>>>> >>>>>>> Regards >>>>> >>>>>>> >>>>> >>>>>>> Christian >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> 2016-09-24 14:24 GMT+02:00 Heiko Zuerker >>>>> >>>>>>> <he...@zu... <mailto:he...@zu...>[3] >>>>> <mailto:he...@zu... <mailto:he...@zu...>>>:[4] >>>>> >>>>>>> >>>>> >>>>>>> _Sorry for the delay. The latest build is >>>>> uploading now. >>>>> >>>>>>> It should be done ~1 hour from the time >>>>> I sent this >>>>> >>>>>>> email._ >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> _Heiko >>>>> >>>>>>> >>>>> >>>>>>> Quoting Heiko Zuerker <he...@zu... >>>>> <mailto:he...@zu...>[3] >>>>> >>>>>>> <mailto:he...@zu... >>>>> <mailto:he...@zu...>>>:_[9] >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>>> _They changes are in CVS. I don't think >>>>> I'll be able >>>>> >>>>>>>> to upload the nightly compile for at leat a few >>>>> >>>>>>>> days. I'll get it done as soon as I can. >>>>> >>>>>>>> >>>>> >>>>>>>> Heiko >>>>> >>>>>>>> >>>>> >>>>>>>> Quoting Heiko Zuerker >>>>> <he...@zu... <mailto:he...@zu...>[3] >>>>> >>>>>>>> <mailto:he...@zu... >>>>> <mailto:he...@zu...>>>:_[9] >>>>> >>>>>>>> >>>>> >>>>>>>>> _Hey >>>>> >>>>>>>>> >>>>> >>>>>>>>> I'm hoping to get a chance on Saturday >>>>> to work on >>>>> >>>>>>>>> the missing components. Stay tuned for further >>>>> >>>>>>>>> updates & sorry for being so slow. >>>>> >>>>>>>>> >>>>> >>>>>>>>> Heiko >>>>> >>>>>>>>> >>>>> >>>>>>>>> Quoting Ma poubelle >>>>> <the...@gm... <mailto:the...@gm...>[7] >>>>> >>>>>>>>> <mailto:the...@gm... >>>>> <mailto:the...@gm...>>>:_[10] >>>>> >>>>>>>>> >>>>> >>>>>>>>>> _Hi Heiko, _ >>>>> >>>>>>>>>> _ _ >>>>> >>>>>>>>>> _All the crm_... binaries is installed >>>>> and work. _ >>>>> >>>>>>>>>> _ _ >>>>> >>>>>>>>>> _My request is about the crm from crmsh . The >>>>> >>>>>>>>>> shell to interactively configure HA. >>>>> >>>>>>>>>> https://github.com/ClusterLabs/crmsh >>>>> <https://github.com/ClusterLabs/crmsh> >>>>> >>>>>>>>>> <https://github.com/ClusterLabs/crmsh >>>>> <https://github.com/ClusterLabs/crmsh>>_ >>>>> >>>>>>>>>> _ _ >>>>> >>>>>>>>>> _And other tools I like to use is pcs >>>>> >>>>>>>>>> (Pacemaker/Corosync configuration system) >>>>> >>>>>>>>>> https://github.com/ClusterLabs/pcs >>>>> <https://github.com/ClusterLabs/pcs> >>>>> >>>>>>>>>> <https://github.com/ClusterLabs/pcs >>>>> <https://github.com/ClusterLabs/pcs>>_ >>>>> >>>>>>>>>> _ _ >>>>> >>>>>>>>>> _Can you integrate them on new rc ?_ >>>>> >>>>>>>>>> _ _ >>>>> >>>>>>>>>> _Kind Regards_ >>>>> >>>>>>>>>> _ _ >>>>> >>>>>>>>>> _ _ >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> _2016-08-28 15:39 GMT+02:00 Heiko Zuerker >>>>> >>>>>>>>>> <he...@zu... >>>>> <mailto:he...@zu...>[3] <mailto:he...@zu... >>>>> <mailto:he...@zu...>>>:_[9] >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> __Hey, >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> I looked into this and all the >>>>> crm binaries >>>>> >>>>>>>>>> are there and corosync & >>>>> pacemaker started for me. >>>>> >>>>>>>>>> Do you have a specific error >>>>> message you can >>>>> >>>>>>>>>> share? >>>>> >>>>>>>>>> Did you start with a vanilla >>>>> config or are you >>>>> >>>>>>>>>> upgrading something? >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> Heiko >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> Quoting Heiko Zuerker >>>>> <he...@zu... <mailto:he...@zu...>[3] >>>>> >>>>>>>>>> <mailto:he...@zu... >>>>> <mailto:he...@zu...>>>:__[11] >>>>> >>>>>>>>>> >>>>> >>>>>>>>>>> __Hi, >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> I won't get a chance to look >>>>> into this until >>>>> >>>>>>>>>>> the weekend. >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> Heiko >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> Quoting Ma poubelle >>>>> <the...@gm... <mailto:the...@gm...>[7] >>>>> >>>>>>>>>>> <mailto:the...@gm... >>>>> <mailto:the...@gm...>>>:__[12] >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>>> __Hi, >>>>> >>>>>>>>>>>> __ >>>>> >>>>>>>>>>>> __I use the >>>>> 1.8.0-rc2-2016-08-13-x86_64__ >>>>> >>>>>>>>>>>> >>>>> >>>>>>>>>>>> __I just try to start a cluster using >>>>> >>>>>>>>>>>> corosync and pacemaker and i >>>>> stop my test , >>>>> >>>>>>>>>>>> cannot find the crm binary ! >>>>> >>>>>>>>>>>> __ >>>>> >>>>>>>>>>>> __Kind Regards__ >>>>> >>>>>>>>>>>> >>>>> >>>>>>>>>>>> >>>>> >>>>>>>>>>>> __ __ >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> __-- >>>>> >>>>>>>>>>> >>>>> >>>>>>>>>>> Regards >>>>> >>>>>>>>>>> Heiko Zuerker >>>>> >>>>>>>>>>> __ >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> _ _ >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> __-- >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> Regards >>>>> >>>>>>>>>> Heiko Zuerker >>>>> >>>>>>>>>> __ >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> >>>>> __------------------------------------------------------------------------------ >>>>> >>>>>>>>>> >>>>> >>>>>>>>>> >>>>> _______________________________________________ >>>>> >>>>>>>>>> Devil-linux-discuss mailing list >>>>> >>>>>>>>>> Dev...@li... >>>>> <mailto:Dev...@li...>[13] >>>>> >>>>>>>>>> >>>>> <mailto:Dev...@li... >>>>> <mailto:Dev...@li...>>[14] >>>>> >>>>>>>>>> >>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>>> >>>>>>>>>> >>>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>>_ >>>>> >>>>>>>>>> _ >>>>> >>>>>>>>>> >>>>> >>>>>>>>> >>>>> >>>>>>>>> >>>>> >>>>>>>>> >>>>> >>>>>>>>> _-- >>>>> >>>>>>>>> >>>>> >>>>>>>>> Regards >>>>> >>>>>>>>> Heiko Zuerker >>>>> >>>>>>>>> _ >>>>> >>>>>>>> >>>>> >>>>>>>> >>>>> >>>>>>>> >>>>> >>>>>>>> _-- >>>>> >>>>>>>> >>>>> >>>>>>>> Regards >>>>> >>>>>>>> Heiko Zuerker >>>>> >>>>>>>> _ >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> _-- >>>>> >>>>>>> >>>>> >>>>>>> Regards >>>>> >>>>>>> Heiko Zuerker >>>>> >>>>>>> _ >>>>> >>>>>>> >>>>> >>>>>>> >>>>> _------------------------------------------------------------------------------ >>>>> >>>>>>> >>>>> >>>>>>> _______________________________________________ >>>>> >>>>>>> Devil-linux-discuss mailing list >>>>> >>>>>>> Dev...@li... >>>>> <mailto:Dev...@li...>[13] >>>>> >>>>>>> >>>>> <mailto:Dev...@li... >>>>> <mailto:Dev...@li...>>[14] >>>>> >>>>>>> >>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>>> >>>>>>> >>>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>>_ >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>> >>>>> >>>>>> >>>>> >>>>>> >>>>> >>>>>> -- >>>>> >>>>>> >>>>> >>>>>> Regards >>>>> >>>>>> Heiko Zuerker >>>>> >>>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> >>>>> >>>>> >>>>> Regards >>>>> >>>>> Heiko Zuerker >>>>> >>>>> >>>>> >>>> >>>>> >>>> >>>>> >>>> >>>>> >>>> -- >>>>> >>>> >>>>> >>>> Regards >>>>> >>>> Heiko Zuerker >>>>> >>>> >>>>> >>>> >>>>> >>>> >>>>> ------------------------------------------------------------------------------ >>>>> >>>> Check out the vibrant tech community on one of >>>>> the world's most >>>>> >>>> engaging tech sites, SlashDot.org! >>>>> http://sdm.link/slashdot >>>>> >>>> _______________________________________________ >>>>> >>>> Devil-linux-discuss mailing list >>>>> >>>> Dev...@li... >>>>> <mailto:Dev...@li...>[13] >>>>> >>>> <mailto:Dev...@li... >>>>> <mailto:Dev...@li...>>[14] >>>>> >>>> >>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>>> >>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>> >>>>> >>>> >>>>> >>>> >>>>> >>>> >>>>> >>>> >>>>> >>>> >>>>> ------------------------------------------------------------------------------ >>>>> >>>> Check out the vibrant tech community on one of the >>>>> world's most >>>>> >>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >>>>> >>>> >>>>> >>>> >>>>> >>>> _______________________________________________ >>>>> >>>> Devil-linux-discuss mailing list >>>>> >>>> Dev...@li... >>>>> <mailto:Dev...@li...>[13] >>>>> >>>> >>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>>> >>>> >>>>> >>> >>>>> >>> -- >>>>> >>> >>>>> >>> *Frank Weis* >>>>> >>> Conseiller informaticien >>>>> >>> >>>>> >>> LE GOUVERNEMENT DU GRAND-DUCHÉ DE LUXEMBOURG >>>>> >>> Ministère de l’Éducation nationale, de l’Enfance et >>>>> de la Jeunesse >>>>> >>> Centre de gestion informatique de l’éducation >>>>> >>> >>>>> >>> eduPôle - Walferdange >>>>> >>> Route de Diekirch, L-7220 Walferdange >>>>> >>> _Adresse postale_ : B.P. 98, L-7201 Bereldange >>>>> >>> >>>>> >>> Tél. : (+352) 247-85973 >>>>> <tel:%28%2B352%29%20247-85973> . Fax : >>>>> (+352) 247-85174 <tel:%28%2B352%29%20247-85174> >>>>> >>> E-mail : Fra...@cg... <mailto:Fra...@cg...>[5] >>>>> <mailto:Fra...@cg... <mailto:Fra...@cg...>>[15] >>>>> >>> www.cgie.lu[16] <http://www.cgie.lu> <http://www.cgie.lu/> >>>>> >>> www.men.lu[17] <http://www.men.lu> <http://www.men.lu/> >>>>> >>> www.gouvernement.lu[18] <http://www.gouvernement.lu> >>>>> <http://www.gouvernement.lu> >>>>> >>> >>>>> >>> Ce message et toutes pièces jointes sont établis à >>>>> l'intention >>>>> >>> exclusive de ses destinataires. Ils peuvent contenir des >>>>> >>> informations confidentielles. Si vous recevez ce message par >>>>> >>> erreur, merci de le détruire et d'en avertir immédiatement >>>>> >>> l'expéditeur. Toute utilisation de ce message non >>>>> conforme à sa >>>>> >>> destination, toute diffusion ou toute publication, totale ou >>>>> >>> partielle, est interdite, sauf autorisation >>>>> expresse. Ce message >>>>> >>> a fait l'objet d'un traitement anti-virus. >>>>> >>> >>>>> >>> Le contenu de ce message et des pièces jointes ne pourrait >>>>> >>> engager la responsabilité du ministère que s'il a >>>>> été émis par >>>>> >>> une personne dûment habilitée agissant dans le >>>>> strict cadre des >>>>> >>> fonctions auxquelles elle est employée et à des fins non >>>>> >>> étrangères à ses attributions. >>>>> >>> >>>>> >> >>>>> >> >>>>> >> >>>>> >> -- >>>>> >> >>>>> >> Regards >>>>> >> Heiko Zuerker >>>>> >> >>>>> > >>>>> > >>>>> > >>>>> > -- >>>>> > >>>>> > Regards >>>>> > Heiko Zuerker >>>>> > >>>>> > >>>>> > >>>>> > >>>>> ------------------------------------------------------------------------------ >>>>> > >>>>> > >>>>> > >>>>> > _______________________________________________ >>>>> > Devil-linux-discuss mailing list >>>>> > Dev...@li... >>>>> <mailto:Dev...@li...>[13] >>>>> > >>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>>> > >>>>> >>>>> -- >>>>> - cameron miller >>>>> - Manager, Network and Systems Administration >>>>> - http://staff.adams.edu/~cdmiller >>>>> <http://staff.adams.edu/~cdmiller> >>>>> >>>>> >>>>> ------------------------------------------------------------------------------ >>>>> _______________________________________________ >>>>> Devil-linux-discuss mailing list >>>>> Dev...@li... >>>>> <mailto:Dev...@li...>[13] >>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>> >>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>>> >>>>> ------------------------------------------------------------------------------ >>>>> >>>>> _______________________________________________ >>>>> Devil-linux-discuss mailing list >>>>> Dev...@li... >>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss_ >>>> >>>> _-- >>>> - cameron miller >>>> - Manager, Network and Systems Administration >>>> - http://staff.adams.edu/~cdmiller >>>> >>>> ------------------------------------------------------------------------------ >>>> _______________________________________________ >>>> Devil-linux-discuss mailing list >>>> Dev...@li...://lists.sourceforge.net/lists/listinfo/devil-linux-discuss[19]_ >>> >>> >>> _-- >>> >>> Regards >>> Heiko Zuerker >>> _ >> >> >> >> >> _-- >> >> Regards >> Heiko Zuerker >> _ >> >> _------------------------------------------------------------------------------ >> Check out the vibrant tech community on one of the world's most >> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >> _______________________________________________ >> Devil-linux-discuss mailing list >> Dev...@li... >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss_ >> Links: ------ [1] mailto:the...@gm...%3E%3E: [2] mailto:cdm...@ad...%3E%3E: [3] mailto:he...@zu...%3E [4] mailto:he...@zu...%3E%3E%3E: [5] mailto:Fra...@cg...%3E [6] mailto:Fra...@cg...%3E%3E%3E: [7] mailto:the...@gm...%3E [8] mailto:the...@gm...%3E%3E%3E: [9] mailto:he...@zu...%3E%3E%3E:_ [10] mailto:the...@gm...%3E%3E%3E:_ [11] mailto:he...@zu...%3E%3E%3E:__ [12] mailto:the...@gm...%3E%3E%3E:__ [13] mailto:Dev...@li...%3E [14] mailto:Dev...@li...%3E%3E [15] mailto:Fra...@cg...%3E%3E [16] http://www.cgie.lu [17] http://www.men.lu [18] http://www.gouvernement.lu [19] -- Regards Heiko Zuerker ... [truncated message content] |
|
From: Heiko Z. <he...@zu...> - 2016-12-24 16:31:33
|
Christian, The new build is uploading right now. It should be done in about 30-60 minutes. Heiko Quoting Heiko Zuerker <he...@zu...>: > Christian, > > Yeah that's my fault. Something broke with the nightly build I > haven't gotten a chance yet to fix it. > Stay tuned for further updates > > Heiko > > Quoting Ma poubelle <the...@gm...>: > >> Hello Heiko, >> I don't find the new testing release ... in any repository >> >> Merry Christmas >> >> Christian >> >> >> 2016-12-18 0:19 GMT+01:00 Heiko Zuerker <he...@zu...>: >> >>> _It's added to CVS. I'm pretty sure the init script needs fixing... >>> I'll upload it on Sunday if the nightly compile finishes successfully. >>> >>> Heiko >>> >>> Quoting Heiko Zuerker <he...@zu...>:_ >>> >>>> _Thanks for checking. >>>> Not sure when I'll get to fixing this. Might be a bit since I >>>> have some other stuff going on. >>>> >>>> Heiko >>>> >>>> Quoting cdmiller <cdm...@ad...>:_ >>>> >>>>> _Definitely need those /usr/lib/ocf/resources.d/heartbeat scripts for >>>>> fail over to function. >>>>> >>>>> In Debian/Ubuntu they are packaged in "resource-agents" >>>>> https://packages.debian.org/sid/resource-agents >>>>> >>>>> Github: >>>>> https://github.com/ClusterLabs/resource-agents >>>>> >>>>> - cameron >>>>> >>>>> On 11/29/2016 10:40 AM, Ma poubelle wrote: _ >>>>>> _Hello, >>>>>> >>>>>> First test, the corosync is working, and pacemaker start. >>>>>> >>>>>> crm is working, the first problem i see is that is missing some RA >>>>>> (ressources agent) >>>>>> >>>>>> located normally on /usr/lib/ocf/resources.d/heartbeat >>>>>> >>>>>> for me the missing files is IPaddr and IPaddr2 used to setup VIP ip >>>>>> address >>>>>> >>>>>> I continue tomorrow. >>>>>> >>>>>> Kind Regards >>>>>> >>>>>> 2016-11-29 14:41 GMT+01:00 Ma poubelle <the...@gm... >>>>>> <mailto:the...@gm...>>:[1] >>>>>> >>>>>> Hello, >>>>>> >>>>>> Due to too much work, I have suspended the tests with DL. >>>>>> I just start again to setup a cluster using corosync and >>>>>> pacemaker. Following the last mail, I understand that we cannot >>>>>> use pcs but crm ! >>>>>> I hope to finish soon and we are happy to have a new release ... >>>>>> Regards >>>>>> >>>>>> 2016-11-29 0:24 GMT+01:00 cdmiller <cdm...@ad... >>>>>> <mailto:cdm...@ad...>>:[2] >>>>>> >>>>>> Of corosync/pacemaker I have only used crm, not pcs. My >>>>>> understanding is crm only relies on python. >>>>>> >>>>>> http://crmsh.nongnu.org/faq.html >>>>>> <http://crmsh.nongnu.org/faq.html> >>>>>> >>>>>> Bottom of the old heartbeat page has a pararaph on crm and pcs: >>>>>> http://www.linux-ha.org/wiki/Configuration >>>>>> <http://www.linux-ha.org/wiki/Configuration> >>>>>> >>>>>> - cameron >>>>>> >>>>>> On 11/23/2016 12:48 PM, Heiko Zuerker wrote: >>>>>> > All, >>>>>> > >>>>>> > Thoughts on this? I'd like to get to a point to >>>>>> finally releasing DL >>>>>> > 1.8 and this is the last open item. >>>>>> > >>>>>> > Heiko >>>>>> > >>>>>> > Quoting Heiko Zuerker <he...@zu... >>>>>> <mailto:he...@zu...>[3] >>>>>> <mailto:he...@zu... <mailto:he...@zu...>>>:[4] >>>>>> > >>>>>> >> All, >>>>>> >> >>>>>> >> Sounds like PCS needs ruby, which is not included in DL. >>>>>> >> I really don't want to add that to DL. Can we get >>>>>> away without PCS? >>>>>> >> >>>>>> >> Heiko >>>>>> >> >>>>>> >> Quoting Frank Weis <Fra...@cg... >>>>>> <mailto:Fra...@cg...>[5] >>>>>> <mailto:Fra...@cg... <mailto:Fra...@cg...>>>:[6] >>>>>> >> >>>>>> >>> Hi Christian, >>>>>> >>> >>>>>> >>> I try to get started with corosync/pacemaker on DL, >>>>>> but I get the >>>>>> >>> following kind of error: >>>>>> >>> >>>>>> >>> root@tunnelconcentrator:~ # pcs cluster auth pcmk-1 pcmk-2 >>>>>> >>> No such file or directory >>>>>> >>> Error: unable to locate command: /usr/bin/ruby >>>>>> >>> root@tunnelconcentrator:~ # cat /etc/Devil-release >>>>>> >>> Devil-Linux 1.8.0-rc2-2016-10-06-x86_64 >>>>>> >>> >>>>>> >>> I am familiar with heartbeat cluster on earlier devil-linux >>>>>> >>> releases but I can't figure out how to get started here. >>>>>> >>> >>>>>> >>> Thanks and regards >>>>>> >>> >>>>>> >>> Frank >>>>>> >>> >>>>>> >>> >>>>>> >>> On 2016-10-20 17:31, Ma poubelle wrote: >>>>>> >>>> Hi Heiko, >>>>>> >>>> >>>>>> >>>> I currently testing the corosync & pacemaker. I don't have >>>>>> >>>> anymore error message when using crm & pcs. But my >>>>>> testing is >>>>>> >>>> not finish. >>>>>> >>>> >>>>>> >>>> I keep you informed when done. >>>>>> >>>> >>>>>> >>>> Kind Regards >>>>>> >>>> >>>>>> >>>> Christian >>>>>> >>>> >>>>>> >>>> 2016-10-15 15:42 GMT+02:00 Heiko Zuerker >>>>>> <he...@zu... <mailto:he...@zu...>[3] >>>>>> >>>> <mailto:he...@zu... <mailto:he...@zu...>>>:[4] >>>>>> >>>> >>>>>> >>>> Christian, >>>>>> >>>> >>>>>> >>>> Did you get a chance to test if it works now? >>>>>> >>>> >>>>>> >>>> >>>>>> >>>> >>>>>> >>>> Heiko >>>>>> >>>> >>>>>> >>>> Quoting Heiko Zuerker <he...@zu... >>>>>> <mailto:he...@zu...>[3] >>>>>> >>>> <mailto:he...@zu... >>>>>> <mailto:he...@zu...>>>:[4] >>>>>> >>>>> >>>>>> >>>>> Christian, >>>>>> >>>>> >>>>>> >>>>> The latest build is uploading now to the >>>>>> testing directory. >>>>>> >>>>> It should be complete about 30 minutes after >>>>>> I sent this email. >>>>>> >>>>> >>>>>> >>>>> Heiko >>>>>> >>>>> >>>>>> >>>>> Quoting Heiko Zuerker <he...@zu... >>>>>> <mailto:he...@zu...>[3] >>>>>> >>>>> <mailto:he...@zu... >>>>>> <mailto:he...@zu...>>>:[4] >>>>>> >>>>> >>>>>> >>>>>> Christian, >>>>>> >>>>>> >>>>>> >>>>>> All the missing python modules are now included. >>>>>> >>>>>> This turned out to be a bit more >>>>>> complicated, since I had >>>>>> >>>>>> to make some significant changes to how >>>>>> python modules get >>>>>> >>>>>> included. The new solution is much more >>>>>> flexible and will >>>>>> >>>>>> make it a lot easier to add python modules. >>>>>> (similar to >>>>>> >>>>>> how perl is handled). >>>>>> >>>>>> >>>>>> >>>>>> I'll upload a new testing release in the >>>>>> next couple of days. >>>>>> >>>>>> >>>>>> >>>>>> Heiko >>>>>> >>>>>> >>>>>> >>>>>> Quoting Ma poubelle <the...@gm... >>>>>> <mailto:the...@gm...>[7] >>>>>> >>>>>> <mailto:the...@gm... >>>>>> <mailto:the...@gm...>>>:[8] >>>>>> >>>>>> >>>>>> >>>>>>> Hello Heiko, >>>>>> >>>>>>> >>>>>> >>>>>>> Thanks for the update. We approach the goal. >>>>>> >>>>>>> >>>>>> >>>>>>> I think that misses some Python modules >>>>>> >>>>>>> >>>>>> >>>>>>> When I launch crm I get the following output >>>>>> >>>>>>> >>>>>> >>>>>>> >>>>>> >>>>>>> root@DL1:~ # crm >>>>>> >>>>>>> Fatal error: >>>>>> >>>>>>> No module named lxml >>>>>> >>>>>>> No module named modules >>>>>> >>>>>>> >>>>>> >>>>>>> Failed to start crmsh! This is likely due to >>>>>> a broken >>>>>> >>>>>>> installation or a missing dependency. >>>>>> >>>>>>> >>>>>> >>>>>>> If you are using a packaged version of >>>>>> crmsh, please try >>>>>> >>>>>>> reinstalling the package. Also check your >>>>>> PYTHONPATH and >>>>>> >>>>>>> make sure that the crmsh module is reachable. >>>>>> >>>>>>> >>>>>> >>>>>>> Please file an issue describing your >>>>>> installation at >>>>>> >>>>>>> https://github.com/Clusterlabs/crmsh/issues/ >>>>>> <https://github.com/Clusterlabs/crmsh/issues/> >>>>>> >>>>>>> <https://github.com/Clusterlabs/crmsh/issues/ >>>>>> <https://github.com/Clusterlabs/crmsh/issues/>> . >>>>>> >>>>>>> root@DL1:~ # >>>>>> >>>>>>> >>>>>> >>>>>>> >>>>>> >>>>>>> And when I launch pcs : >>>>>> >>>>>>> >>>>>> >>>>>>> root@DL1:~ # pcs >>>>>> >>>>>>> Traceback (most recent call last): >>>>>> >>>>>>> File "/usr/sbin/pcs", line 9, in <module> >>>>>> >>>>>>> load_entry_point('pcs==0.9.153', >>>>>> 'console_scripts', >>>>>> >>>>>>> 'pcs')() >>>>>> >>>>>>> File >>>>>> >>>>>>> >>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>>> >>>>>>> line 519, in load_entry_point >>>>>> >>>>>>> return >>>>>> get_distribution(dist).load_entry_point(group, >>>>>> >>>>>>> name) >>>>>> >>>>>>> File >>>>>> >>>>>>> >>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>>> >>>>>>> line 2630, in load_entry_point >>>>>> >>>>>>> return ep.load() >>>>>> >>>>>>> File >>>>>> >>>>>>> >>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>>> >>>>>>> line 2310, in load >>>>>> >>>>>>> return self.resolve() >>>>>> >>>>>>> File >>>>>> >>>>>>> >>>>>> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >>>>>> >>>>>>> line 2316, in resolve >>>>>> >>>>>>> module = __import__(self.module_name, >>>>>> >>>>>>> fromlist=['__name__'], level=0) >>>>>> >>>>>>> File >>>>>> "/usr/lib/python2.7/site-packages/pcs/app.py", >>>>>> >>>>>>> line 14, in <module> >>>>>> >>>>>>> from pcs import ( >>>>>> >>>>>>> File >>>>>> "/usr/lib/python2.7/site-packages/pcs/acl.py", >>>>>> >>>>>>> line 10, in <module> >>>>>> >>>>>>> from pcs import ( >>>>>> >>>>>>> File >>>>>> "/usr/lib/python2.7/site-packages/pcs/prop.py", >>>>>> >>>>>>> line 13, in <module> >>>>>> >>>>>>> from pcs import utils >>>>>> >>>>>>> File >>>>>> "/usr/lib/python2.7/site-packages/pcs/utils.py", >>>>>> >>>>>>> line 65, in <module> >>>>>> >>>>>>> from pcs.lib.env import LibraryEnvironment >>>>>> >>>>>>> File >>>>>> "/usr/lib/python2.7/site-packages/pcs/lib/env.py", >>>>>> >>>>>>> line 8, in <module> >>>>>> >>>>>>> from lxml import etree >>>>>> >>>>>>> ImportError: No module named lxml >>>>>> >>>>>>> root@DL1:~ # >>>>>> >>>>>>> >>>>>> >>>>>>> Regards >>>>>> >>>>>>> >>>>>> >>>>>>> Christian >>>>>> >>>>>>> >>>>>> >>>>>>> >>>>>> >>>>>>> 2016-09-24 14:24 GMT+02:00 Heiko Zuerker >>>>>> >>>>>>> <he...@zu... <mailto:he...@zu...>[3] >>>>>> <mailto:he...@zu... <mailto:he...@zu...>>>:[4] >>>>>> >>>>>>> >>>>>> >>>>>>> _Sorry for the delay. The latest build is >>>>>> uploading now. >>>>>> >>>>>>> It should be done ~1 hour from the time >>>>>> I sent this >>>>>> >>>>>>> email._ >>>>>> >>>>>>> >>>>>> >>>>>>> >>>>>> >>>>>>> >>>>>> >>>>>>> _Heiko >>>>>> >>>>>>> >>>>>> >>>>>>> Quoting Heiko Zuerker >>>>>> <he...@zu... <mailto:he...@zu...>[3] >>>>>> >>>>>>> <mailto:he...@zu... >>>>>> <mailto:he...@zu...>>>:_[9] >>>>>> >>>>>>> >>>>>> >>>>>>> >>>>>> >>>>>>> >>>>>> >>>>>>>> _They changes are in CVS. I don't think >>>>>> I'll be able >>>>>> >>>>>>>> to upload the nightly compile for at leat a few >>>>>> >>>>>>>> days. I'll get it done as soon as I can. >>>>>> >>>>>>>> >>>>>> >>>>>>>> Heiko >>>>>> >>>>>>>> >>>>>> >>>>>>>> Quoting Heiko Zuerker >>>>>> <he...@zu... <mailto:he...@zu...>[3] >>>>>> >>>>>>>> <mailto:he...@zu... >>>>>> <mailto:he...@zu...>>>:_[9] >>>>>> >>>>>>>> >>>>>> >>>>>>>>> _Hey >>>>>> >>>>>>>>> >>>>>> >>>>>>>>> I'm hoping to get a chance on >>>>>> Saturday to work on >>>>>> >>>>>>>>> the missing components. Stay tuned for further >>>>>> >>>>>>>>> updates & sorry for being so slow. >>>>>> >>>>>>>>> >>>>>> >>>>>>>>> Heiko >>>>>> >>>>>>>>> >>>>>> >>>>>>>>> Quoting Ma poubelle >>>>>> <the...@gm... <mailto:the...@gm...>[7] >>>>>> >>>>>>>>> <mailto:the...@gm... >>>>>> <mailto:the...@gm...>>>:_[10] >>>>>> >>>>>>>>> >>>>>> >>>>>>>>>> _Hi Heiko, _ >>>>>> >>>>>>>>>> _ _ >>>>>> >>>>>>>>>> _All the crm_... binaries is installed >>>>>> and work. _ >>>>>> >>>>>>>>>> _ _ >>>>>> >>>>>>>>>> _My request is about the crm from crmsh . The >>>>>> >>>>>>>>>> shell to interactively configure HA. >>>>>> >>>>>>>>>> https://github.com/ClusterLabs/crmsh >>>>>> <https://github.com/ClusterLabs/crmsh> >>>>>> >>>>>>>>>> <https://github.com/ClusterLabs/crmsh >>>>>> <https://github.com/ClusterLabs/crmsh>>_ >>>>>> >>>>>>>>>> _ _ >>>>>> >>>>>>>>>> _And other tools I like to use is pcs >>>>>> >>>>>>>>>> (Pacemaker/Corosync configuration system) >>>>>> >>>>>>>>>> https://github.com/ClusterLabs/pcs >>>>>> <https://github.com/ClusterLabs/pcs> >>>>>> >>>>>>>>>> <https://github.com/ClusterLabs/pcs >>>>>> <https://github.com/ClusterLabs/pcs>>_ >>>>>> >>>>>>>>>> _ _ >>>>>> >>>>>>>>>> _Can you integrate them on new rc ?_ >>>>>> >>>>>>>>>> _ _ >>>>>> >>>>>>>>>> _Kind Regards_ >>>>>> >>>>>>>>>> _ _ >>>>>> >>>>>>>>>> _ _ >>>>>> >>>>>>>>>> >>>>>> >>>>>>>>>> _2016-08-28 15:39 GMT+02:00 Heiko Zuerker >>>>>> >>>>>>>>>> <he...@zu... >>>>>> <mailto:he...@zu...>[3] <mailto:he...@zu... >>>>>> <mailto:he...@zu...>>>:_[9] >>>>>> >>>>>>>>>> >>>>>> >>>>>>>>>> __Hey, >>>>>> >>>>>>>>>> >>>>>> >>>>>>>>>> I looked into this and all the >>>>>> crm binaries >>>>>> >>>>>>>>>> are there and corosync & >>>>>> pacemaker started for me. >>>>>> >>>>>>>>>> Do you have a specific error >>>>>> message you can >>>>>> >>>>>>>>>> share? >>>>>> >>>>>>>>>> Did you start with a vanilla >>>>>> config or are you >>>>>> >>>>>>>>>> upgrading something? >>>>>> >>>>>>>>>> >>>>>> >>>>>>>>>> Heiko >>>>>> >>>>>>>>>> >>>>>> >>>>>>>>>> Quoting Heiko Zuerker >>>>>> <he...@zu... <mailto:he...@zu...>[3] >>>>>> >>>>>>>>>> <mailto:he...@zu... >>>>>> <mailto:he...@zu...>>>:__[11] >>>>>> >>>>>>>>>> >>>>>> >>>>>>>>>>> __Hi, >>>>>> >>>>>>>>>>> >>>>>> >>>>>>>>>>> I won't get a chance to look >>>>>> into this until >>>>>> >>>>>>>>>>> the weekend. >>>>>> >>>>>>>>>>> >>>>>> >>>>>>>>>>> Heiko >>>>>> >>>>>>>>>>> >>>>>> >>>>>>>>>>> Quoting Ma poubelle >>>>>> <the...@gm... <mailto:the...@gm...>[7] >>>>>> >>>>>>>>>>> <mailto:the...@gm... >>>>>> <mailto:the...@gm...>>>:__[12] >>>>>> >>>>>>>>>>> >>>>>> >>>>>>>>>>>> __Hi, >>>>>> >>>>>>>>>>>> __ >>>>>> >>>>>>>>>>>> __I use the >>>>>> 1.8.0-rc2-2016-08-13-x86_64__ >>>>>> >>>>>>>>>>>> >>>>>> >>>>>>>>>>>> __I just try to start a cluster using >>>>>> >>>>>>>>>>>> corosync and pacemaker and i >>>>>> stop my test , >>>>>> >>>>>>>>>>>> cannot find the crm binary ! >>>>>> >>>>>>>>>>>> __ >>>>>> >>>>>>>>>>>> __Kind Regards__ >>>>>> >>>>>>>>>>>> >>>>>> >>>>>>>>>>>> >>>>>> >>>>>>>>>>>> __ __ >>>>>> >>>>>>>>>>> >>>>>> >>>>>>>>>>> >>>>>> >>>>>>>>>>> >>>>>> >>>>>>>>>>> __-- >>>>>> >>>>>>>>>>> >>>>>> >>>>>>>>>>> Regards >>>>>> >>>>>>>>>>> Heiko Zuerker >>>>>> >>>>>>>>>>> __ >>>>>> >>>>>>>>>> >>>>>> >>>>>>>>>> _ _ >>>>>> >>>>>>>>>> >>>>>> >>>>>>>>>> __-- >>>>>> >>>>>>>>>> >>>>>> >>>>>>>>>> Regards >>>>>> >>>>>>>>>> Heiko Zuerker >>>>>> >>>>>>>>>> __ >>>>>> >>>>>>>>>> >>>>>> >>>>>>>>>> >>>>>> __------------------------------------------------------------------------------ >>>>>> >>>>>>>>>> >>>>>> >>>>>>>>>> >>>>>> _______________________________________________ >>>>>> >>>>>>>>>> Devil-linux-discuss mailing list >>>>>> >>>>>>>>>> Dev...@li... >>>>>> <mailto:Dev...@li...>[13] >>>>>> >>>>>>>>>> >>>>>> <mailto:Dev...@li... >>>>>> <mailto:Dev...@li...>>[14] >>>>>> >>>>>>>>>> >>>>>> >>>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>>> >>>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>>>> >>>>>>>>>> >>>>>> >>>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>>> >>>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>>_ >>>>>> >>>>>>>>>> _ >>>>>> >>>>>>>>>> >>>>>> >>>>>>>>> >>>>>> >>>>>>>>> >>>>>> >>>>>>>>> >>>>>> >>>>>>>>> _-- >>>>>> >>>>>>>>> >>>>>> >>>>>>>>> Regards >>>>>> >>>>>>>>> Heiko Zuerker >>>>>> >>>>>>>>> _ >>>>>> >>>>>>>> >>>>>> >>>>>>>> >>>>>> >>>>>>>> >>>>>> >>>>>>>> _-- >>>>>> >>>>>>>> >>>>>> >>>>>>>> Regards >>>>>> >>>>>>>> Heiko Zuerker >>>>>> >>>>>>>> _ >>>>>> >>>>>>> >>>>>> >>>>>>> >>>>>> >>>>>>> >>>>>> >>>>>>> _-- >>>>>> >>>>>>> >>>>>> >>>>>>> Regards >>>>>> >>>>>>> Heiko Zuerker >>>>>> >>>>>>> _ >>>>>> >>>>>>> >>>>>> >>>>>>> >>>>>> _------------------------------------------------------------------------------ >>>>>> >>>>>>> >>>>>> >>>>>>> _______________________________________________ >>>>>> >>>>>>> Devil-linux-discuss mailing list >>>>>> >>>>>>> Dev...@li... >>>>>> <mailto:Dev...@li...>[13] >>>>>> >>>>>>> >>>>>> <mailto:Dev...@li... >>>>>> <mailto:Dev...@li...>>[14] >>>>>> >>>>>>> >>>>>> >>>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>>> >>>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>>>> >>>>>>> >>>>>> >>>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>>> >>>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>>_ >>>>>> >>>>>>> >>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> >>>>>> >>>>>> >>>>>> Regards >>>>>> >>>>>> Heiko Zuerker >>>>>> >>>>>> >>>>>> >>>>> >>>>>> >>>>> >>>>>> >>>>> >>>>>> >>>>> -- >>>>>> >>>>> >>>>>> >>>>> Regards >>>>>> >>>>> Heiko Zuerker >>>>>> >>>>> >>>>>> >>>> >>>>>> >>>> >>>>>> >>>> >>>>>> >>>> -- >>>>>> >>>> >>>>>> >>>> Regards >>>>>> >>>> Heiko Zuerker >>>>>> >>>> >>>>>> >>>> >>>>>> >>>> >>>>>> ------------------------------------------------------------------------------ >>>>>> >>>> Check out the vibrant tech community on one of >>>>>> the world's most >>>>>> >>>> engaging tech sites, SlashDot.org! >>>>>> http://sdm.link/slashdot >>>>>> >>>> _______________________________________________ >>>>>> >>>> Devil-linux-discuss mailing list >>>>>> >>>> Dev...@li... >>>>>> <mailto:Dev...@li...>[13] >>>>>> >>>> <mailto:Dev...@li... >>>>>> <mailto:Dev...@li...>>[14] >>>>>> >>>> >>>>>> >>>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>>> >>>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>>>> >>>> >>>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>>> >>>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>> >>>>>> >>>> >>>>>> >>>> >>>>>> >>>> >>>>>> >>>> >>>>>> >>>> >>>>>> ------------------------------------------------------------------------------ >>>>>> >>>> Check out the vibrant tech community on one of the >>>>>> world's most >>>>>> >>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >>>>>> >>>> >>>>>> >>>> >>>>>> >>>> _______________________________________________ >>>>>> >>>> Devil-linux-discuss mailing list >>>>>> >>>> Dev...@li... >>>>>> <mailto:Dev...@li...>[13] >>>>>> >>>> >>>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>>> >>>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>>>> >>>> >>>>>> >>> >>>>>> >>> -- >>>>>> >>> >>>>>> >>> *Frank Weis* >>>>>> >>> Conseiller informaticien >>>>>> >>> >>>>>> >>> LE GOUVERNEMENT DU GRAND-DUCHÉ DE LUXEMBOURG >>>>>> >>> Ministère de l’Éducation nationale, de l’Enfance et >>>>>> de la Jeunesse >>>>>> >>> Centre de gestion informatique de l’éducation >>>>>> >>> >>>>>> >>> eduPôle - Walferdange >>>>>> >>> Route de Diekirch, L-7220 Walferdange >>>>>> >>> _Adresse postale_ : B.P. 98, L-7201 Bereldange >>>>>> >>> >>>>>> >>> Tél. : (+352) 247-85973 >>>>>> <tel:%28%2B352%29%20247-85973> . Fax : >>>>>> (+352) 247-85174 <tel:%28%2B352%29%20247-85174> >>>>>> >>> E-mail : Fra...@cg... <mailto:Fra...@cg...>[5] >>>>>> <mailto:Fra...@cg... <mailto:Fra...@cg...>>[15] >>>>>> >>> www.cgie.lu[16] <http://www.cgie.lu> <http://www.cgie.lu/> >>>>>> >>> www.men.lu[17] <http://www.men.lu> <http://www.men.lu/> >>>>>> >>> www.gouvernement.lu[18] <http://www.gouvernement.lu> >>>>>> <http://www.gouvernement.lu> >>>>>> >>> >>>>>> >>> Ce message et toutes pièces jointes sont établis à >>>>>> l'intention >>>>>> >>> exclusive de ses destinataires. Ils peuvent contenir des >>>>>> >>> informations confidentielles. Si vous recevez ce message par >>>>>> >>> erreur, merci de le détruire et d'en avertir immédiatement >>>>>> >>> l'expéditeur. Toute utilisation de ce message non >>>>>> conforme à sa >>>>>> >>> destination, toute diffusion ou toute publication, totale ou >>>>>> >>> partielle, est interdite, sauf autorisation >>>>>> expresse. Ce message >>>>>> >>> a fait l'objet d'un traitement anti-virus. >>>>>> >>> >>>>>> >>> Le contenu de ce message et des pièces jointes ne pourrait >>>>>> >>> engager la responsabilité du ministère que s'il a >>>>>> été émis par >>>>>> >>> une personne dûment habilitée agissant dans le >>>>>> strict cadre des >>>>>> >>> fonctions auxquelles elle est employée et à des fins non >>>>>> >>> étrangères à ses attributions. >>>>>> >>> >>>>>> >> >>>>>> >> >>>>>> >> >>>>>> >> -- >>>>>> >> >>>>>> >> Regards >>>>>> >> Heiko Zuerker >>>>>> >> >>>>>> > >>>>>> > >>>>>> > >>>>>> > -- >>>>>> > >>>>>> > Regards >>>>>> > Heiko Zuerker >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> ------------------------------------------------------------------------------ >>>>>> > >>>>>> > >>>>>> > >>>>>> > _______________________________________________ >>>>>> > Devil-linux-discuss mailing list >>>>>> > Dev...@li... >>>>>> <mailto:Dev...@li...>[13] >>>>>> > >>>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>>> >>>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>>>> > >>>>>> >>>>>> -- >>>>>> - cameron miller >>>>>> - Manager, Network and Systems Administration >>>>>> - http://staff.adams.edu/~cdmiller >>>>>> <http://staff.adams.edu/~cdmiller> >>>>>> >>>>>> >>>>>> ------------------------------------------------------------------------------ >>>>>> _______________________________________________ >>>>>> Devil-linux-discuss mailing list >>>>>> Dev...@li... >>>>>> <mailto:Dev...@li...>[13] >>>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >>>>>> >>>>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >>>>>> >>>>>> ------------------------------------------------------------------------------ >>>>>> >>>>>> _______________________________________________ >>>>>> Devil-linux-discuss mailing list >>>>>> Dev...@li... >>>>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss_ >>>>> >>>>> _-- >>>>> - cameron miller >>>>> - Manager, Network and Systems Administration >>>>> - http://staff.adams.edu/~cdmiller >>>>> >>>>> ------------------------------------------------------------------------------ >>>>> _______________________________________________ >>>>> Devil-linux-discuss mailing list >>>>> Dev...@li...://lists.sourceforge.net/lists/listinfo/devil-linux-discuss[19]_ >>>> >>>> >>>> _-- >>>> >>>> Regards >>>> Heiko Zuerker >>>> _ >>> >>> >>> >>> >>> _-- >>> >>> Regards >>> Heiko Zuerker >>> _ >>> >>> _------------------------------------------------------------------------------ >>> Check out the vibrant tech community on one of the world's most >>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >>> _______________________________________________ >>> Devil-linux-discuss mailing list >>> Dev...@li... >>> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss_ >>> > > > -- > > Regards > Heiko Zuerker > Links: ------ [1] mailto:the...@gm...%3E%3E: [2] mailto:cdm...@ad...%3E%3E: [3] mailto:he...@zu...%3E [4] mailto:he...@zu...%3E%3E%3E: [5] mailto:Fra...@cg...%3E [6] mailto:Fra...@cg...%3E%3E%3E: [7] mailto:the...@gm...%3E [8] mailto:the...@gm...%3E%3E%3E: [9] mailto:he...@zu...%3E%3E%3E:_ [10] mailto:the...@gm...%3E%3E%3E:_ [11] mailto:he...@zu...%3E%3E%3E:__ [12] mailto:the...@gm...%3E%3E%3E:__ [13] mailto:Dev...@li...%3E [14] mailto:Dev...@li...%3E%3E [15] mailto:Fra...@cg...%3E%3E [16] http://www.cgie.lu [17] http://www.men.lu [18] http://www.gouvernement.lu [19] -- Regards Heiko Zuerker ... [truncated message content] |
|
From: Ma p. <the...@gm...> - 2017-01-03 13:48:30
|
Hello Heiko First of all, Happy New Year...all the best. I have tested the new build and it's work for corosync and pacemaker. My next problem is to create a build environnement to compile a driver for my Moxa Uport 1610-16 I create a new mail for this Thanks Regards 2016-12-24 17:31 GMT+01:00 Heiko Zuerker <he...@zu...>: > Christian, > > The new build is uploading right now. > It should be done in about 30-60 minutes. > > > Heiko > > Quoting Heiko Zuerker <he...@zu...>: > > Christian, > > Yeah that's my fault. Something broke with the nightly build I haven't > gotten a chance yet to fix it. > Stay tuned for further updates > > Heiko > > Quoting Ma poubelle <the...@gm...>: > > Hello Heiko, > > I don't find the new testing release ... in any repository > > Merry Christmas > > Christian > > 2016-12-18 0:19 GMT+01:00 Heiko Zuerker <he...@zu...>: > >> >> >> >> >> >> *It's added to CVS. I'm pretty sure the init script needs fixing... I'll >> upload it on Sunday if the nightly compile finishes successfully. Heiko >> Quoting Heiko Zuerker <he...@zu... <he...@zu...>>:* >> >> >> >> >> >> >> *Thanks for checking. Not sure when I'll get to fixing this. Might be a >> bit since I have some other stuff going on. Heiko Quoting cdmiller >> <cdm...@ad... <cdm...@ad...>>:* >> >> >> >> >> >> >> >> >> >> >> >> >> *Definitely need those /usr/lib/ocf/resources.d/heartbeat scripts for >> fail over to function. In Debian/Ubuntu they are packaged in >> "resource-agents" https://packages.debian.org/sid/resource-agents >> <https://packages.debian.org/sid/resource-agents> Github: >> https://github.com/ClusterLabs/resource-agents >> <https://github.com/ClusterLabs/resource-agents> - cameron On 11/29/2016 >> 10:40 AM, Ma poubelle wrote: * >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> *Hello, First test, the corosync is working, and pacemaker start. crm is >> working, the first problem i see is that is missing some RA (ressources >> agent) located normally on /usr/lib/ocf/resources.d/heartbeat for me the >> missing files is IPaddr and IPaddr2 used to setup VIP ip address I continue >> tomorrow. Kind Regards 2016-11-29 14:41 GMT+01:00 Ma poubelle >> <the...@gm... <the...@gm...> >> <mailto:the...@gm...>>: <the...@gm...%3E%3E:> Hello, >> Due to too much work, I have suspended the tests with DL. I just >> start again to setup a cluster using corosync and pacemaker. Following >> the last mail, I understand that we cannot use pcs but crm ! I hope >> to finish soon and we are happy to have a new release ... Regards >> 2016-11-29 0:24 GMT+01:00 cdmiller <cdm...@ad... <cdm...@ad...> >> <mailto:cdm...@ad...>>: <cdm...@ad...%3E%3E:> Of >> corosync/pacemaker I have only used crm, not pcs. My understanding >> is crm only relies on python. http://crmsh.nongnu.org/faq.html >> <http://crmsh.nongnu.org/faq.html> >> <http://crmsh.nongnu.org/faq.html <http://crmsh.nongnu.org/faq.html>> >> Bottom of the old heartbeat page has a pararaph on crm and pcs: >> http://www.linux-ha.org/wiki/Configuration >> <http://www.linux-ha.org/wiki/Configuration> >> <http://www.linux-ha.org/wiki/Configuration >> <http://www.linux-ha.org/wiki/Configuration>> - cameron On >> 11/23/2016 12:48 PM, Heiko Zuerker wrote: > All, > >> > Thoughts on this? I'd like to get to a point to finally releasing DL >> > 1.8 and this is the last open item. > > Heiko >> > > Quoting Heiko Zuerker <he...@zu... <he...@zu...> >> <mailto:he...@zu...> <he...@zu...%3E> >> <mailto:he...@zu... <he...@zu...> <mailto:he...@zu...>>>: >> <he...@zu...%3E%3E%3E:> > >> All, >> >> >> Sounds like PCS needs ruby, which is not included in DL. >> I >> really don't want to add that to DL. Can we get away without PCS? >> >> >> Heiko >> >> Quoting Frank Weis >> <Fra...@cg... <Fra...@cg...> <mailto:Fra...@cg...> >> <Fra...@cg...%3E> <mailto:Fra...@cg... >> <Fra...@cg...> <mailto:Fra...@cg...>>>: >> <Fra...@cg...%3E%3E%3E:> >> >>> Hi Christian, >> >>> >>> I try to get started with corosync/pacemaker on DL, but I >> get the >>> following kind of error: >>> >>> >> root@tunnelconcentrator <root@tunnelconcentrator>:~ # pcs cluster auth >> pcmk-1 pcmk-2 >>> No such file or directory >>> Error: >> unable to locate command: /usr/bin/ruby >>> root@tunnelconcentrator >> <root@tunnelconcentrator>:~ # cat /etc/Devil-release >>> >> Devil-Linux 1.8.0-rc2-2016-10-06-x86_64 >>> >>> I am >> familiar with heartbeat cluster on earlier devil-linux >>> releases >> but I can't figure out how to get started here. >>> >>> >> Thanks and regards >>> >>> Frank >>> >>> >> >>> On 2016-10-20 17:31, Ma poubelle wrote: >>>> Hi Heiko, >> >>>> >>>> I currently testing the corosync & pacemaker. I >> don't have >>>> anymore error message when using crm & pcs. But my >> testing is >>>> not finish. >>>> >>>> I keep you >> informed when done. >>>> >>>> Kind Regards >>>> >> >>>> Christian >>>> >>>> 2016-10-15 15:42 GMT+02:00 >> Heiko Zuerker <he...@zu... <he...@zu...> >> <mailto:he...@zu...> <he...@zu...%3E> >>>> >> <mailto:he...@zu... <he...@zu...> <mailto:he...@zu...>>>: >> <he...@zu...%3E%3E%3E:> >>>> >>>> Christian, >> >>>> >>>> Did you get a chance to test if it works now? >> >>>> >>>> >>>> >>>> Heiko >>>> >> >>>> Quoting Heiko Zuerker <he...@zu... <he...@zu...> >> <mailto:he...@zu...> <he...@zu...%3E> >>>> >> <mailto:he...@zu... <he...@zu...> >> <mailto:he...@zu...>>>: <he...@zu...%3E%3E%3E:> >>>>> >> >>>>> Christian, >>>>> >>>>> The latest build >> is uploading now to the testing directory. >>>>> It should be >> complete about 30 minutes after I sent this email. >>>>> >> >>>>> Heiko >>>>> >>>>> Quoting Heiko Zuerker >> <he...@zu... <he...@zu...> <mailto:he...@zu...> >> <he...@zu...%3E> >>>>> <mailto:he...@zu... >> <he...@zu...> <mailto:he...@zu...>>>: >> <he...@zu...%3E%3E%3E:> >>>>> >>>>>> Christian, >> >>>>>> >>>>>> All the missing python modules are now >> included. >>>>>> This turned out to be a bit more complicated, >> since I had >>>>>> to make some significant changes to how >> python modules get >>>>>> included. The new solution is much >> more flexible and will >>>>>> make it a lot easier to add >> python modules. (similar to >>>>>> how perl is handled). >> >>>>>> >>>>>> I'll upload a new testing release in the next >> couple of days. >>>>>> >>>>>> Heiko >>>>>> >> >>>>>> Quoting Ma poubelle <the...@gm... >> <the...@gm...> <mailto:the...@gm...> >> <the...@gm...%3E> >>>>>> <mailto:the...@gm... >> <the...@gm...> <mailto:the...@gm...>>>: >> <the...@gm...%3E%3E%3E:> >>>>>> >>>>>>> Hello >> Heiko, >>>>>>> >>>>>>> Thanks for the update. We >> approach the goal. >>>>>>> >>>>>>> I think that misses >> some Python modules >>>>>>> >>>>>>> When I launch crm I >> get the following output >>>>>>> >>>>>>> >>>>>>> >> root@DL1 <root@DL1>:~ # crm >>>>>>> Fatal error: >> >>>>>>> No module named lxml >>>>>>> No >> module named modules >>>>>>> >>>>>>> Failed to >> start crmsh! This is likely due to a broken >>>>>>> >> installation or a missing dependency. >>>>>>> >>>>>>> >> If you are using a packaged version of crmsh, please try >> >>>>>>> reinstalling the package. Also check your >> PYTHONPATH and >>>>>>> make sure that the crmsh module is >> reachable. >>>>>>> >>>>>>> Please file an issue >> describing your installation at >>>>>>> >> https://github.com/Clusterlabs/crmsh/issues/ >> <https://github.com/Clusterlabs/crmsh/issues/> >> <https://github.com/Clusterlabs/crmsh/issues/ >> <https://github.com/Clusterlabs/crmsh/issues/>> >>>>>>> >> <https://github.com/Clusterlabs/crmsh/issues/ >> <https://github.com/Clusterlabs/crmsh/issues/> >> <https://github.com/Clusterlabs/crmsh/issues/ >> <https://github.com/Clusterlabs/crmsh/issues/>>> . >>>>>>> >> root@DL1 <root@DL1>:~ # >>>>>>> >>>>>>> >>>>>>> >> And when I launch pcs : >>>>>>> >>>>>>> root@DL1 >> <root@DL1>:~ # pcs >>>>>>> Traceback (most recent call last): >> >>>>>>> File "/usr/sbin/pcs", line 9, in <module> >> >>>>>>> load_entry_point('pcs==0.9.153', 'console_scripts', >> >>>>>>> 'pcs')() >>>>>>> File >>>>>>> >> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >> >>>>>>> line 519, in load_entry_point >>>>>>> return >> get_distribution(dist).load_entry_point(group, >>>>>>> >> name) >>>>>>> File >>>>>>> >> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >> >>>>>>> line 2630, in load_entry_point >>>>>>> return >> ep.load() >>>>>>> File >>>>>>> >> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >> >>>>>>> line 2310, in load >>>>>>> return >> self.resolve() >>>>>>> File >>>>>>> >> "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", >> >>>>>>> line 2316, in resolve >>>>>>> module = >> __import__(self.module_name, >>>>>>> fromlist=['__name__'], >> level=0) >>>>>>> File >> "/usr/lib/python2.7/site-packages/pcs/app.py", >>>>>>> line 14, >> in <module> >>>>>>> from pcs import ( >>>>>>> >> File "/usr/lib/python2.7/site-packages/pcs/acl.py", >> >>>>>>> line 10, in <module> >>>>>>> from pcs import ( >> >>>>>>> File >> "/usr/lib/python2.7/site-packages/pcs/prop.py", >>>>>>> line >> 13, in <module> >>>>>>> from pcs import utils >> >>>>>>> File "/usr/lib/python2.7/site-packages/pcs/utils.py", >> >>>>>>> line 65, in <module> >>>>>>> from >> pcs.lib.env import LibraryEnvironment >>>>>>> File >> "/usr/lib/python2.7/site-packages/pcs/lib/env.py", >>>>>>> line >> 8, in <module> >>>>>>> from lxml import etree >> >>>>>>> ImportError: No module named lxml >>>>>>> root@DL1 >> <root@DL1>:~ # >>>>>>> >>>>>>> Regards >>>>>>> >> >>>>>>> Christian >>>>>>> >>>>>>> >> >>>>>>> 2016-09-24 14:24 GMT+02:00 Heiko Zuerker >>>>>>> >> <he...@zu... <he...@zu...> <mailto:he...@zu...> >> <he...@zu...%3E> <mailto:he...@zu... >> <he...@zu...> <mailto:he...@zu...>>>: >> <he...@zu...%3E%3E%3E:> >>>>>>> >>>>>>> >> _Sorry for the delay. The latest build is uploading now. >> >>>>>>> It should be done ~1 hour from the time I sent this >> >>>>>>> email._ >>>>>>> >>>>>>> >>>>>>> >> >>>>>>> _Heiko >>>>>>> >>>>>>> Quoting >> Heiko Zuerker <he...@zu... <he...@zu...> >> <mailto:he...@zu...> <he...@zu...%3E> >>>>>>> >> <mailto:he...@zu... <he...@zu...> >> <mailto:he...@zu...>>>:_ <he...@zu...%3E%3E%3E:_> >> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> _They >> changes are in CVS. I don't think I'll be able >>>>>>>> >> to upload the nightly compile for at leat a few >>>>>>>> >> days. I'll get it done as soon as I can. >>>>>>>> >> >>>>>>>> Heiko >>>>>>>> >>>>>>>> Quoting >> Heiko Zuerker <he...@zu... <he...@zu...> >> <mailto:he...@zu...> <he...@zu...%3E> >>>>>>>> >> <mailto:he...@zu... <he...@zu...> >> <mailto:he...@zu...>>>:_ <he...@zu...%3E%3E%3E:_> >> >>>>>>>> >>>>>>>>> _Hey >>>>>>>>> >> >>>>>>>>> I'm hoping to get a chance on Saturday to work on >> >>>>>>>>> the missing components. Stay tuned for further >> >>>>>>>>> updates & sorry for being so slow. >>>>>>>>> >> >>>>>>>>> Heiko >>>>>>>>> >>>>>>>>> >> Quoting Ma poubelle <the...@gm... <the...@gm...> >> <mailto:the...@gm...> <the...@gm...%3E> >>>>>>>>> >> <mailto:the...@gm... <the...@gm...> >> <mailto:the...@gm...>>>:_ <the...@gm...%3E%3E%3E:_> >> >>>>>>>>> >>>>>>>>>> _Hi Heiko, _ >>>>>>>>>> >> _ _ >>>>>>>>>> _All the crm_... binaries is installed >> and work. _ >>>>>>>>>> _ _ >>>>>>>>>> >> _My request is about the crm from crmsh . The >>>>>>>>>> >> shell to interactively configure HA. >>>>>>>>>> >> https://github.com/ClusterLabs/crmsh >> <https://github.com/ClusterLabs/crmsh> >> <https://github.com/ClusterLabs/crmsh >> <https://github.com/ClusterLabs/crmsh>> >>>>>>>>>> >> <https://github.com/ClusterLabs/crmsh >> <https://github.com/ClusterLabs/crmsh> >> <https://github.com/ClusterLabs/crmsh >> <https://github.com/ClusterLabs/crmsh>>>_ >>>>>>>>>> _ _ >> >>>>>>>>>> _And other tools I like to use is pcs >> >>>>>>>>>> (Pacemaker/Corosync configuration system) >> >>>>>>>>>> https://github.com/ClusterLabs/pcs >> <https://github.com/ClusterLabs/pcs> >> <https://github.com/ClusterLabs/pcs <https://github.com/ClusterLabs/pcs>> >> >>>>>>>>>> <https://github.com/ClusterLabs/pcs >> <https://github.com/ClusterLabs/pcs> >> <https://github.com/ClusterLabs/pcs <https://github.com/ClusterLabs/pcs>>>_ >> >>>>>>>>>> _ _ >>>>>>>>>> _Can you >> integrate them on new rc ?_ >>>>>>>>>> _ _ >> >>>>>>>>>> _Kind Regards_ >>>>>>>>>> _ _ >> >>>>>>>>>> _ _ >>>>>>>>>> >>>>>>>>>> >> _2016-08-28 15:39 GMT+02:00 Heiko Zuerker >>>>>>>>>> >> <he...@zu... <he...@zu...> <mailto:he...@zu...> >> <he...@zu...%3E> <mailto:he...@zu... <he...@zu...> >> <mailto:he...@zu...>>>:_ <he...@zu...%3E%3E%3E:_> >> >>>>>>>>>> >>>>>>>>>> __Hey, >>>>>>>>>> >> >>>>>>>>>> I looked into this and all the crm binaries >> >>>>>>>>>> are there and corosync & pacemaker started for me. >> >>>>>>>>>> Do you have a specific error message you can >> >>>>>>>>>> share? >>>>>>>>>> Did you >> start with a vanilla config or are you >>>>>>>>>> >> upgrading something? >>>>>>>>>> >>>>>>>>>> >> Heiko >>>>>>>>>> >>>>>>>>>> Quoting Heiko >> Zuerker <he...@zu... <he...@zu...> <mailto:he...@zu...> >> <he...@zu...%3E> >>>>>>>>>> >> <mailto:he...@zu... <he...@zu...> >> <mailto:he...@zu...>>>:__ <he...@zu...%3E%3E%3E:__> >> >>>>>>>>>> >>>>>>>>>>> __Hi, >>>>>>>>>>> >> >>>>>>>>>>> I won't get a chance to look into this until >> >>>>>>>>>>> the weekend. >>>>>>>>>>> >> >>>>>>>>>>> Heiko >>>>>>>>>>> >>>>>>>>>>> >> Quoting Ma poubelle <the...@gm... <the...@gm...> >> <mailto:the...@gm...> <the...@gm...%3E> >> >>>>>>>>>>> <mailto:the...@gm... <the...@gm...> >> <mailto:the...@gm...>>>:__ <the...@gm...%3E%3E%3E:__> >> >>>>>>>>>>> >>>>>>>>>>>> __Hi, >>>>>>>>>>>> >> __ >>>>>>>>>>>> __I use the >> 1.8.0-rc2-2016-08-13-x86_64__ >>>>>>>>>>>> >>>>>>>>>>>> >> __I just try to start a cluster using >>>>>>>>>>>> >> corosync and pacemaker and i stop my test , >>>>>>>>>>>> >> cannot find the crm binary ! >>>>>>>>>>>> __ >> >>>>>>>>>>>> __Kind Regards__ >>>>>>>>>>>> >> >>>>>>>>>>>> >>>>>>>>>>>> __ __ >>>>>>>>>>> >> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> __-- >> >>>>>>>>>>> >>>>>>>>>>> Regards >> >>>>>>>>>>> Heiko Zuerker >>>>>>>>>>> __ >> >>>>>>>>>> >>>>>>>>>> _ _ >>>>>>>>>> >> >>>>>>>>>> __-- >>>>>>>>>> >>>>>>>>>> >> Regards >>>>>>>>>> Heiko Zuerker >> >>>>>>>>>> __ >>>>>>>>>> >>>>>>>>>> >> __------------------------------------------------------------------------------ >> >>>>>>>>>> >>>>>>>>>> >> _______________________________________________ >>>>>>>>>> >> Devil-linux-discuss mailing list >>>>>>>>>> >> Dev...@li... >> <Dev...@li...> >> <mailto:Dev...@li...> >> <Dev...@li...%3E> >>>>>>>>>> >> <mailto:Dev...@li... >> <Dev...@li...> >> <mailto:Dev...@li...>> >> <Dev...@li...%3E%3E> >>>>>>>>>> >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>> >> >>>>>>>>>> >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>>>_ >> >>>>>>>>>> _ >>>>>>>>>> >>>>>>>>> >> >>>>>>>>> >>>>>>>>> >>>>>>>>> _-- >>>>>>>>> >> >>>>>>>>> Regards >>>>>>>>> Heiko Zuerker >> >>>>>>>>> _ >>>>>>>> >>>>>>>> >> >>>>>>>> >>>>>>>> _-- >>>>>>>> >>>>>>>> >> Regards >>>>>>>> Heiko Zuerker >>>>>>>> >> _ >>>>>>> >>>>>>> >>>>>>> >>>>>>> >> _-- >>>>>>> >>>>>>> Regards >>>>>>> >> Heiko Zuerker >>>>>>> _ >>>>>>> >> >>>>>>> >> _------------------------------------------------------------------------------ >> >>>>>>> >>>>>>> >> _______________________________________________ >>>>>>> >> Devil-linux-discuss mailing list >>>>>>> >> Dev...@li... >> <Dev...@li...> >> <mailto:Dev...@li...> >> <Dev...@li...%3E> >>>>>>> >> <mailto:Dev...@li... >> <Dev...@li...> >> <mailto:Dev...@li...>> >> <Dev...@li...%3E%3E> >>>>>>> >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>> >> >>>>>>> >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>>>_ >> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> >> >>>>>> -- >>>>>> >>>>>> Regards >>>>>> >> Heiko Zuerker >>>>>> >>>>> >>>>> >>>>> >> >>>>> -- >>>>> >>>>> Regards >>>>> >> Heiko Zuerker >>>>> >>>> >>>> >>>> >> >>>> -- >>>> >>>> Regards >>>> >> Heiko Zuerker >>>> >>>> >>>> >> ------------------------------------------------------------------------------ >> >>>> Check out the vibrant tech community on one of the world's >> most >>>> engaging tech sites, SlashDot.org! >> http://sdm.link/slashdot <http://sdm.link/slashdot> >>>> >> _______________________________________________ >>>> >> Devil-linux-discuss mailing list >>>> >> Dev...@li... >> <Dev...@li...> >> <mailto:Dev...@li...> >> <Dev...@li...%3E> >>>> >> <mailto:Dev...@li... >> <Dev...@li...> >> <mailto:Dev...@li...>> >> <Dev...@li...%3E%3E> >>>> >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>> >> >>>> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>>> >> >>>> >>>> >>>> >>>> >>>> >> ------------------------------------------------------------------------------ >> >>>> Check out the vibrant tech community on one of the world's >> most >>>> engaging tech sites, SlashDot.org! >> http://sdm.link/slashdot <http://sdm.link/slashdot> >>>> >> >>>> >>>> _______________________________________________ >> >>>> Devil-linux-discuss mailing list >>>> >> Dev...@li... >> <Dev...@li...> >> <mailto:Dev...@li...> >> <Dev...@li...%3E> >>>> >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>> >> >>>> >>> >>> -- >>> >>> *Frank Weis* >> >>> Conseiller informaticien >>> >>> LE GOUVERNEMENT DU >> GRAND-DUCHÉ DE LUXEMBOURG >>> Ministère de l’Éducation nationale, >> de l’Enfance et de la Jeunesse >>> Centre de gestion informatique >> de l’éducation >>> >>> eduPôle - Walferdange >>> >> Route de Diekirch, L-7220 Walferdange >>> _Adresse postale_ : B.P. >> 98, L-7201 Bereldange >>> >>> Tél. : (+352) 247-85973 >> <tel:%28%2B352%29%20247-85973> . Fax : (+352) 247-85174 >> <tel:%28%2B352%29%20247-85174> >>> E-mail : Fra...@cg... >> <Fra...@cg...> <mailto:Fra...@cg...> <Fra...@cg...%3E> >> <mailto:Fra...@cg... <Fra...@cg...> >> <mailto:Fra...@cg...>> <Fra...@cg...%3E%3E> >>> >> www.cgie.lu <http://www.cgie.lu> <http://www.cgie.lu <http://www.cgie.lu>> >> <http://www.cgie.lu/ <http://www.cgie.lu/>> >>> www.men.lu >> <http://www.men.lu> <http://www.men.lu <http://www.men.lu>> >> <http://www.men.lu/ <http://www.men.lu/>> >>> www.gouvernement.lu >> <http://www.gouvernement.lu> <http://www.gouvernement.lu >> <http://www.gouvernement.lu>> <http://www.gouvernement.lu >> <http://www.gouvernement.lu>> >>> >>> Ce message et toutes >> pièces jointes sont établis à l'intention >>> exclusive de ses >> destinataires. Ils peuvent contenir des >>> informations >> confidentielles. Si vous recevez ce message par >>> erreur, merci >> de le détruire et d'en avertir immédiatement >>> l'expéditeur. >> Toute utilisation de ce message non conforme à sa >>> destination, >> toute diffusion ou toute publication, totale ou >>> partielle, est >> interdite, sauf autorisation expresse. Ce message >>> a fait >> l'objet d'un traitement anti-virus. >>> >>> Le contenu de >> ce message et des pièces jointes ne pourrait >>> engager la >> responsabilité du ministère que s'il a été émis par >>> une >> personne dûment habilitée agissant dans le strict cadre des >>> >> fonctions auxquelles elle est employée et à des fins non >>> >> étrangères à ses attributions. >>> >> >> >> >> >> -- >> >> Regards >> Heiko Zuerker >> >> > > > > -- > > >> Regards > Heiko Zuerker > > > > >> ------------------------------------------------------------------------------ >> > > > > >> _______________________________________________ > >> Devil-linux-discuss mailing list > >> Dev...@li... >> <Dev...@li...> >> <mailto:Dev...@li...> >> <Dev...@li...%3E> > >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>> >> > -- - cameron miller - Manager, Network and >> Systems Administration - http://staff.adams.edu/~cdmiller >> <http://staff.adams.edu/~cdmiller> >> <http://staff.adams.edu/~cdmiller <http://staff.adams.edu/~cdmiller>> >> >> ------------------------------------------------------------------------------ >> _______________________________________________ >> Devil-linux-discuss mailing list >> Dev...@li... >> <Dev...@li...> >> <mailto:Dev...@li...> >> <Dev...@li...%3E> >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss> >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>> >> ------------------------------------------------------------------------------ >> _______________________________________________ Devil-linux-discuss mailing >> list Dev...@li... >> <Dev...@li...> >> https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss >> <https://lists.sourceforge.net/lists/listinfo/devil-linux-discuss>* >> >> >> >> >> >> >> >> >> >> *-- - cameron miller - Manager, Network and Systems Administration - >> http://staff.adams.edu/~cdmiller <http://staff.adams.edu/~cdmiller> >> -----------------------------... [truncated message content] |
