Activity for DragonOS

Tijs Bastiaansen posted a comment on ticket #81

Tijs Bastiaansen — Tue, 21 Apr 2026 15:44:57 -0000

delete please the commant has chanced from pat to pat-winlink

Tijs Bastiaansen created ticket #81

Tijs Bastiaansen — Tue, 21 Apr 2026 15:35:05 -0000

pat winlink

n6vkz posted a comment on ticket #80

n6vkz — Mon, 20 Apr 2026 10:34:17 -0000

I have referd this also to Hamlib group on SourceForge due the nature of the software. No gui comes up like other SDR recievers. Yes, from the text line I have tested it with hamlib-util . My results were these: rigctl -r 127.0.0.1 -m 3073 -s 19200 -p 4533 no reply rigctl -r 127.0.0.1:4533 -m 3073 -s 19200 -p 4533 rigctl -r 127.0.0.1:8073 -m 3073 -s 19200 -p 4533 rigctld -r 127.0.0.1 -m 3073 -s 19200 -p 4533 ^Crig_open: error = rig_init: rig has VFO_A rig_init: rig has VFO_B rig_init: rig has VFO_MEM...

n6vkz posted a comment on ticket #80

n6vkz — Sun, 19 Apr 2026 14:24:20 -0000

Hello, Thank you for your reply ... Icom 7300-setup.txt was from AI but not exactly fully true, I actually try not to use AI. I did some test hacking on some of this but no cigar , ha ha. The rigcontrol.py is from the source code. Dev-input.txt is from my computer hardware. From the instructions it looks so easy but in this case something is missing. I will try to send more info tomorrow. Thank you and God Bless Robert N6VKZ / YF3VKZ Indonesia On Fri, Apr 17, 2026 at 3:35 AM Cemaxecuter cemaxecuter@users.sourceforge.net...

NDXsW posted a comment on discussion General Discussion

NDXsW — Sat, 18 Apr 2026 04:53:08 -0000

thanks for the quick reply and help!! no LimeSDR needed here for what i'm working on so uninstall it goes.

Cemaxecuter posted a comment on ticket #80

Cemaxecuter — Fri, 17 Apr 2026 10:35:25 -0000

Sorry I hadn’t responded sooner. Unfortunately I do not personally own a rig to very against. Can you share any more details, errors or otherwise that may help pinpoint what’s not connecting? Sent from Proton Mail for iOS. -------- Original Message -------- On Thursday, 04/16/26 at 02:15 n6vkz n6vkz@users.sourceforge.net wrote: Hello group, This is my 2nd time to send a post. I am still new to social group like this. I am not sure if correct OWNER: Cemaxecuter so Administrator please correct if this...

Cemaxecuter posted a comment on discussion General Discussion

Cemaxecuter — Fri, 17 Apr 2026 10:16:23 -0000

The kernel changed in such a way that the LimeSDR PCIe drivers no longer compile against it on their own with dkms. For this reason I may need to no longer ship with the driver. In Noble R9 I manually fixed it with the kernel upgrade, but it would appear it’s happening again. It shouldn’t harm anything else and as long as you don’t need the limepci driver it could be uninstalled. Thank you for bringing it to my attention. Sent from Proton Mail for iOS. -------- Original Message -------- On Friday,...

NDXsW posted a comment on discussion General Discussion

NDXsW — Fri, 17 Apr 2026 07:39:41 -0000

i'm have DragonOS_Noble_R8 installed, 6.17.0-19-generic kernel. other day ran 'sudo apt update && sudo apt upgrade' and i get returned quite a few compile warnings & errors such as, make[1]: Entering directory '/usr/src/linux-headers-6.17.0-19-generic' make[2]: Entering directory '/var/lib/dkms/limepcie/0.1.9/build' warning: the compiler differs from the one used to build the kernel The kernel was built by: x86_64-linux-gnu-gcc-13 (Ubuntu 13.3.0-6ubuntu2~24.04.1) 13.3.0 You are using: gcc-13 (Ubuntu...

n6vkz posted a comment on ticket #80

n6vkz — Thu, 16 Apr 2026 06:15:40 -0000

Hello group, This is my 2nd time to send a post. I am still new to social group like this. I am not sure if correct OWNER: Cemaxecuter so Administrator please correct if this is wrong. The main point is I still do not know how to make Icom 7300 transceiver link to the web software. Robert N6VKZ

n6vkz created ticket #80

n6vkz — Sat, 11 Apr 2026 08:51:56 -0000

OPENWEBRX issue

DragonOS released /DragonOS_Noble_R9.iso

DragonOS — Fri, 27 Mar 2026 11:13:03 -0000

DragonOS released /DragonOS_Noble_R9.iso.sha256

DragonOS — Fri, 27 Mar 2026 11:05:04 -0000

DragonOS updated /README.txt

DragonOS — Fri, 27 Mar 2026 11:04:03 -0000

Cemaxecuter posted a comment on ticket #79

Cemaxecuter — Wed, 25 Mar 2026 19:17:01 -0000

I suspect related to lime dkms driver? I’ve built a new iso I need to release that updates the dkms driver and comes with the new kernel, should have it uploaded soon. Sent from Proton Mail for iOS. -------- Original Message -------- On Wednesday, 03/25/26 at 14:55 Tijs Bastiaansen tijs1@users.sourceforge.net wrote: [tickets:#79] Update 25032026 Status: open Milestone: 1.0 Created: Wed Mar 25, 2026 06:55 PM UTC by Tijs Bastiaansen Last Updated: Wed Mar 25, 2026 06:55 PM UTC Owner: nobody When updating...

Tijs Bastiaansen created ticket #79

Tijs Bastiaansen — Wed, 25 Mar 2026 18:55:32 -0000

Update 25032026

Cemaxecuter posted a comment on ticket #78

Cemaxecuter — Mon, 23 Mar 2026 20:25:52 -0000

That was the first thing I was gonna suspect being Broadcom. I have to look, but there’s something with the installer and the way that mine is running that excludes that particular older Broadcom package I think or might conflict. I think you’re on the right track though, which is needing to pull in those possibly even non-open source drivers. Sent from Proton Mail for iOS. -------- Original Message -------- On Monday, 03/23/26 at 14:49 Mark Shryock mashrok@users.sourceforge.net wrote: [tickets:#78]...

Mark Shryock created ticket #78

Mark Shryock — Mon, 23 Mar 2026 18:49:52 -0000

Dell Latitude e5500 no WiFi

Mark Shryock posted a comment on ticket #76

Mark Shryock — Mon, 23 Mar 2026 18:44:05 -0000

Not sure if this is a seperate ticket, but I have mine configured as a dual boot with Win 10. It boots straight to linux and I am never given an option to pick which os.

Cemaxecuter posted a comment on discussion General Discussion

Cemaxecuter — Fri, 20 Mar 2026 02:14:57 -0000

It was not my intention to wall people off w/ a binary (I try to actually keep source in /usr/src), but I spend a ton of time building it the way I do to ensure as much as possible is all tested together and requires zero internet (besides download) to get up and running. An easy way to contribute would be to create a repo with some post install scripts that install against a known base. Some others have done that. If GR-bladerf is missing though, I’ll check that now and add it. Thanks for the report...

Rick Mark posted a comment on discussion General Discussion

Rick Mark — Fri, 20 Mar 2026 01:39:11 -0000

hey there it seems that we need to do some "build scripts" that are hosted in the source / perhaps a github for the image generation if this project isn't going to be yet another "here's an image I built.." You've effectivally walled off the contributions of the FOSS community with "binary only" releases I love the product, saw gr-bladeRF was missing, went to go contibute it back since its trivial and .... No way to do so - can just raise it as an issue. I may go this route myself by builing out...

Eric Creech modified a comment on discussion General Discussion

Eric Creech — Tue, 03 Mar 2026 22:52:20 -0000

Hello! I have attempted install three times. Two doeloads of the ISO and on two differnt USb sticks. All attempts end up stuck at 'Retrieving file 1 of 3' . i will attempt to add pictures. I though maybe I was expecting too much and left it run ivernight. No luck. Machine in an HP with an I5 2.4 and 16 gig RAM. 1TB ssd.

Eric Creech posted a comment on discussion General Discussion

Eric Creech — Sun, 01 Mar 2026 13:05:24 -0000

Cemaxecuter posted a comment on ticket #76

Cemaxecuter — Wed, 04 Feb 2026 00:33:28 -0000

I’ve actually installed the other way around, so it’s possible the mx boot menu would need to be manually altered. When you boot into mx Linux can you see the noble partition? Sent from Proton Mail for iOS. -------- Original Message -------- On Wednesday, 01/21/26 at 06:17 Jeffrey Mallinson oldfarmer@users.sourceforge.net wrote: [tickets:#76] Dragon Nobel doesn't create a boot loader Status: open Milestone: 1.0 Created: Wed Jan 21, 2026 11:17 AM UTC by Jeffrey Mallinson Last Updated: Wed Jan 21,...

Tijs Bastiaansen posted a comment on discussion General Discussion

Tijs Bastiaansen — Wed, 21 Jan 2026 14:41:19 -0000

One of the users of DragonOS asked me where the name dragonOS is coming from. I couldn't answer him. So maybe can. He suggested to name it HamLinuxOS. or something like that.

Tijs Bastiaansen created ticket #77

Tijs Bastiaansen — Wed, 21 Jan 2026 14:31:05 -0000

raspberry Pi imager and Arduino IDE

Jeffrey Mallinson created ticket #76

Jeffrey Mallinson — Wed, 21 Jan 2026 11:17:03 -0000

Dragon Nobel doesn't create a boot loader

DragonOS updated /README.txt

DragonOS — Wed, 24 Dec 2025 15:49:02 -0000

DragonOS released /DragonOS_Noble_R8.iso

DragonOS — Wed, 24 Dec 2025 15:49:02 -0000

DragonOS released /DragonOS_Noble_R8.iso.sha256

DragonOS — Wed, 24 Dec 2025 15:40:03 -0000

DragonOS updated /README.txt

DragonOS — Wed, 24 Dec 2025 15:40:03 -0000

Cemaxecuter posted a comment on ticket #75

Cemaxecuter — Sat, 20 Dec 2025 17:52:28 -0000

Thank you for the note. I just custom built it and loaded it to the noble ppa. Assuming you are running the latest DragonOS Noble you should be able to run sudo apt update and sudo apt install jtdx. Note that this is the standard jtdx and not the improved version. I’m not sure what people prefer these days. You can also grab the deb here and manually install, https://github.com/alphafox02/noble_ppa Sent from Proton Mail for iOS. -------- Original Message -------- On Saturday, 12/20/25 at 11:42 Tijs...

Tijs Bastiaansen posted a comment on ticket #75

Tijs Bastiaansen — Sat, 20 Dec 2025 16:45:22 -0000

Tijs Bastiaansen created ticket #75

Tijs Bastiaansen — Sat, 20 Dec 2025 16:42:43 -0000

Jtdx

Cemaxecuter posted a comment on discussion General Discussion

Cemaxecuter — Sat, 29 Nov 2025 23:00:49 -0000

Looks like you’re right, that’s odd.. I thought I got it all in there. I’ll look into this and get it all added if possible. I talked about it here and then apparently didn’t finish. I have to see why, probably just an oversight. https://youtu.be/nFN_F1GA_5A?si=klvcbKH6nGUfcY9s Sent from Proton Mail for iOS. -------- Original Message -------- On Saturday, 11/29/25 at 17:29 Hugo Casal hugocasal1963@users.sourceforge.net wrote: Hello I have installed version 24.04 (Noble) of Dragon OS on my laptop,...

Hugo Casal posted a comment on discussion General Discussion

Hugo Casal — Sat, 29 Nov 2025 22:29:34 -0000

Hello I have installed version 24.04 (Noble) of Dragon OS on my laptop, but I cannot find the Signal Server (GUI) program in any directory. I read that it came pre-installed, but apparently that is not the case. How can I install it? thanks

Scott Oakland posted a comment on discussion General Discussion

Scott Oakland — Wed, 12 Nov 2025 00:14:32 -0000

I installed DragonOS and got it working on my Intel Mac Mini using the USB Flash Drive installation. How can I get my WiFi working? Thanks. Scott, N1IA

William Hast posted a comment on discussion General Discussion

William Hast — Tue, 11 Nov 2025 23:30:59 -0000

That was my next plan. Will try to do it later tonight. On Tue, Nov 11, 2025 at 3:54 PM Cemaxecuter cemaxecuter@users.sourceforge.net wrote: Okay, so the same hash. Can you burn the iso to a separate usb stick with etcher just to compare. I really do like ventoy, just want to check and see if there’s any difference. Sent from Proton Mail for iOS. -------- Original Message -------- On Tuesday, 11/11/25 at 15:18 William Hast kp4djt51@users.sourceforge.net wrote: I did a sha256 check and both checksums...

Cemaxecuter posted a comment on discussion General Discussion

Cemaxecuter — Tue, 11 Nov 2025 21:54:18 -0000

Okay, so the same hash. Can you burn the iso to a separate usb stick with etcher just to compare. I really do like ventoy, just want to check and see if there’s any difference. Sent from Proton Mail for iOS. -------- Original Message -------- On Tuesday, 11/11/25 at 15:18 William Hast kp4djt51@users.sourceforge.net wrote: I did a sha256 check and both checksums are the same (the one for the download and the checksum file) On Tue, Nov 11, 2025 at 1:21 PM William Hast kp4djt51@users.sourceforge.net...

William Hast posted a comment on discussion General Discussion

William Hast — Tue, 11 Nov 2025 20:18:04 -0000

I did a sha256 check and both checksums are the same (the one for the download and the checksum file) On Tue, Nov 11, 2025 at 1:21 PM William Hast kp4djt51@users.sourceforge.net wrote: I am trying to load DragonOS Noble. But when I try to boot it off of the stick I get Error invalid magic number Error you need to load the kernel first The machine is a Thinkpad X201 I am using a jump drive with Ventoy on it. I have other ISO's on it they all boot Any ideas?" -- Chuck -- KP4DJT AREDN Meshphone # 405.2005...

William Hast posted a comment on discussion General Discussion

William Hast — Tue, 11 Nov 2025 19:43:26 -0000

Here is what I got: kp4djt@FW16-kp4djt:~/iso$ sha256sum DragonOS_Noble_R7.iso 8680dff4565c0d3e6b297295dd8f57ed1ffe28dcaef99d27adfb3e98eaf93d10 DragonOS_Noble_R7.iso kp4djt@FW16-kp4djt:~/iso$ cat DragonOS_Noble_R7.iso.sha256 8680dff4565c0d3e6b297295dd8f57ed1ffe28dcaef99d27adfb3e98eaf93d10 DragonOS_Noble_R7.iso Looks the same between the result and the sha256 file. On Tue, Nov 11, 2025 at 1:39 PM Cemaxecuter cemaxecuter@users.sourceforge.net wrote: William, I would double check the sha256 provided...

Cemaxecuter posted a comment on discussion General Discussion

Cemaxecuter — Tue, 11 Nov 2025 19:39:10 -0000

William, I would double check the sha256 provided on SF against your download. It sounds like a case of a possible bad download. Sent from Proton Mail for iOS. -------- Original Message -------- On Tuesday, 11/11/25 at 14:21 William Hast kp4djt51@users.sourceforge.net wrote: I am trying to load DragonOS Noble. But when I try to boot it off of the stick I get Error invalid magic number Error you need to load the kernel first The machine is a Thinkpad X201 I am using a jump drive with Ventoy on it....

William Hast posted a comment on discussion General Discussion

William Hast — Tue, 11 Nov 2025 19:20:59 -0000

I am trying to load DragonOS Noble. But when I try to boot it off of the stick I get Error invalid magic number Error you need to load the kernel first The machine is a Thinkpad X201 I am using a jump drive with Ventoy on it. I have other ISO's on it they all boot Any ideas?" -- Chuck -- KP4DJT AREDN Meshphone # 405.2005 and 405.2013 HamHotline # 11259 DMR ID 3140958

Jason Nagy posted a comment on discussion General Discussion

Jason Nagy — Mon, 10 Nov 2025 03:00:35 -0000

Ok, I'm losing my mind. The EPC is up and running, the ENB is up and running. I see the EPC received the S1 Setup Request with the parameters. The EPC Sends the S1 Setup Response, but the ENB never sends the S1 setup complete. I have the firewall open for all local traffic, I've confirmed configs on both files. Nothing I do helps. HELP!!!

Matt Trask posted a comment on discussion General Discussion

Matt Trask — Fri, 07 Nov 2025 23:21:33 -0000

Thanks for the quick response. AFAIK there nothing else virtual running on this system, it is a fresh install of Lubuntu/Dragon and adding Oracle VirtualBox is the first thing I've added. Haven't even run most of the other stuff with SDR yet that I ran on my previous Dell laptop. Running your commands gave this result for both of them: Failed to stop libvirtd.service: Unit libvirtd.service not loaded.

Cemaxecuter posted a comment on discussion General Discussion

Cemaxecuter — Fri, 07 Nov 2025 19:26:19 -0000

Welcome! If I had to guess, perhaps there’s a hyper-v running on your Linux install. Can you try the following sudo systemctl stop libvirtd Sudo systemctl stop virtlogd Trying to think what else it could be. Sent from Proton Mail for iOS. -------- Original Message -------- On Friday, 11/07/25 at 14:12 Matt Trask mattstert@users.sourceforge.net wrote: @cemaxecutor I understand that DragonOS runs in Virtual Machines, I use it on my main MacBook Pro with VMWare Fusion. But my question is the reverse...

Matt Trask posted a comment on discussion General Discussion

Matt Trask — Fri, 07 Nov 2025 19:12:06 -0000

@cemaxecutor I understand that DragonOS runs in Virtual Machines, I use it on my main MacBook Pro with VMWare Fusion. But my question is the reverse - I'm running DragonOS on an older Mac AirBook (it runs just fine of course) and want to use Oracle VirtualBox to run Windows 10 for those pesky radio utilities (CPS, I'm lookin' at you) that don't run anywhere else. It installs fine, but when I try to run the Windows VM after installing it the error message says that another hypervisor is running. Any...

Cemaxecuter posted a comment on discussion General Discussion

Cemaxecuter — Thu, 30 Oct 2025 17:51:39 -0000

A cat of /etc/os-release can help but problem is I didn’t factor for when I need LTS release comes out which overwrites my entry. If it’s Noble R7 or above you’ll find that in the /etc/apt/ are you’ll find it’s got an entry to my github PPA that’ll allow you to pull in updates I put together. You have a good point though, something I need to better address. Sent from Proton Mail for iOS. -------- Original Message -------- On Thursday, 10/30/25 at 04:24 NDXsW ndxsw@users.sourceforge.net wrote: lsb_release...

NDXsW posted a comment on discussion General Discussion

NDXsW — Thu, 30 Oct 2025 08:24:46 -0000

lsb_release -a Distributor ID: Ubuntu Description: Ubuntu 24.04.3 LTS Release: 24.04 Codename: noble uname -a Linux dragonos 6.14.0-28-generic #28~24.04.1-Ubuntu SMP PREEMPT_DYNAMIC Fri Jul 25 10:47:01 UTC 2 x86_64 x86_64 x86_64 GNU/Linux does DragonOS have a cmdln tool that returns what Rx version we have installed? not sure what R ver i have currently.

Eric Davanture posted a comment on discussion General Discussion

Eric Davanture — Fri, 24 Oct 2025 19:18:20 -0000

FWIW, I think my answer also works for https://answers.launchpad.net/ubuntu/+question/819983 :-)

Eric Davanture posted a comment on discussion General Discussion

Eric Davanture — Fri, 24 Oct 2025 19:15:58 -0000

Greetings, Thanks for your answer. Much appreciated. Yes, HP ZBook 17 G1 is the generation just before the G2 but it is quite similar. That said, I just found the answer and it stands in the BIOS. You have to go to BIOS: Advanced -> Boot Options -> Boot Mode and select "UEFI Native (Without CSM) " instead of "Legacy". If you select "Legacy", then DragonOS will never boot once installed on the HDD of the ZBook. I hope this helps for anyone using DragonOS on this kind of laptop.

Cemaxecuter posted a comment on discussion General Discussion

Cemaxecuter — Fri, 24 Oct 2025 17:40:02 -0000

I'm having a look here, assuming the G1 is even older? https://answers.launchpad.net/ubuntu/+question/819983

Cemaxecuter posted a comment on a wiki page

Cemaxecuter — Fri, 24 Oct 2025 17:38:14 -0000

Hey Mykhaylo, sorry not keeping up on here. I would say best to focus on any RF links that may be in use. I imagine the RTL-SDR wouldn't cover too much, unless there's usage under 1.5Ghz or so. Best bet may be the NanoVNA. Try and see if you can get ahold of a HackRF. For anything else, try and reach me via the site.

Eric Davanture posted a comment on discussion General Discussion

Eric Davanture — Mon, 20 Oct 2025 11:24:58 -0000

Greetings, I downloaded a few days ago DragonOS Noble R7 iso and created an USB key that boots correctly. I then installed DragonOS on the hard drive (ssd) of the (bare-metal) computer (HP ZBook 17 G1) without any problem. After successful installation of DragonOS, when rebooting after removing the USB key, no Operating System is found on the hard disk of the computer so I suspect that DragonOS did not prepare correctly the hard disk. Any clue ? Any help will be greatly appreciated. Thanks a lot...

Mykhaylo posted a comment on a wiki page

Mykhaylo — Sun, 12 Oct 2025 09:15:29 -0000

Thanks for literally almost everything and your time and effort. I must have been sleeping not to come across this before now. I am from Ukraine, you know that we have a war with Russia - a terrorist country. Every day our defenders - our guys die precisely from the large number of drones that Iran and China supply to Russia. I am an amateur in RTL-SDR. I bought a Raspberry PI 5, installed DragonOS, bought RTL-SDR v4, NanoVNA. Please tell me, step by step, or what I should read to make a device for...

Joseph Reith posted a comment on ticket #74

Joseph Reith — Fri, 03 Oct 2025 14:17:00 -0000

Odd but this time in a fresh VM the installer launched on the second attempt to execute. Not sure why I had an issue the other day but seems to be working now. On Thu, Oct 2, 2025, 10:09 PM Cemaxecuter cemaxecuter@users.sourceforge.net wrote: Thanks! I also need to take a look again at Fissure and go down the list of what it wants to try install outside the core vs what’s already in DragonOS. Even the core can cause issues if it tries to replace the GNU Radio version and such. Sent from Proton Mail...

Cemaxecuter posted a comment on ticket #74

Cemaxecuter — Fri, 03 Oct 2025 02:09:23 -0000

Thanks! I also need to take a look again at Fissure and go down the list of what it wants to try install outside the core vs what’s already in DragonOS. Even the core can cause issues if it tries to replace the GNU Radio version and such. Sent from Proton Mail for iOS On Thu, Oct 2, 2025 at 10:07 PM, Joseph Reith wrote: I am updating the FISSURE installer to include an entry for Noble and was testing on your newest release, I am going to be reinstalling and testing...

Joseph Reith posted a comment on ticket #74

Joseph Reith — Fri, 03 Oct 2025 02:06:57 -0000

I am updating the FISSURE installer to include an entry for Noble and was testing on your newest release, I am going to be reinstalling and testing again in the morning, I will let you know how it goes. On Thu, Oct 2, 2025, 2:27 PM Cemaxecuter cemaxecuter@users.sourceforge.net wrote: That’s interesting. I have seen it where the first time you double click it doesn’t start but the very next time you do it brings it up. I’ll take a closer look. If you get another opportunity on the same computer and...

Cemaxecuter posted a comment on ticket #74

Cemaxecuter — Thu, 02 Oct 2025 18:27:27 -0000

That’s interesting. I have seen it where the first time you double click it doesn’t start but the very next time you do it brings it up. I’ll take a closer look. If you get another opportunity on the same computer and could try it again with booting and starting it twice be curious to see if it works for you. Sent from Proton Mail for iOS On Thu, Oct 2, 2025 at 11:04 AM, Joseph Reith wrote: [tickets:#74] Installer bug Status: open Milestone: 1.0 Labels: Bug Created:...

Joseph Reith created ticket #74

Joseph Reith — Thu, 02 Oct 2025 15:04:40 -0000

Installer bug

Dan modified a comment on discussion General Discussion

Dan — Wed, 24 Sep 2025 02:47:33 -0000

Dan modified a comment on discussion General Discussion

Dan — Tue, 23 Sep 2025 04:00:31 -0000

Nee to linux and DragonOS . I can't figure out how to install the tools within VMware. Between 2 different AI basically saying the same command lines that dont work , it just seems now that im going around in cicles with their help. Along with trying the instructions provided on the VMware website I still cant get tools it installed . So VMware no longer comes with the tools built in and have to get it separately . When I click install tools with VMware guest, a popup tells me that “Click Install...

Dan modified a comment on discussion General Discussion

Dan — Tue, 23 Sep 2025 03:54:19 -0000

Dan posted a comment on discussion General Discussion

Dan — Tue, 23 Sep 2025 03:53:15 -0000

Andy Lawendel modified a comment on discussion General Discussion

Andy Lawendel — Tue, 02 Sep 2025 16:57:15 -0000

I've created a dual boot machine with W11, what do you suggest to tome from R5 to R7, should I format the DragonO partition before installing R7? I don't like the idea of having both R5 and R7 Sorry for these dumb questions! A.

Andy Lawendel modified a comment on discussion General Discussion

Andy Lawendel — Tue, 02 Sep 2025 16:57:02 -0000

I've created a dua boot machine with W11, what do you suggest to tome from R5 to R7, should I format the DragonO partition before installing R7? I don't like the idea of having both R5 and R7 Sorry for these dumb questions! A.

Andy Lawendel posted a comment on discussion General Discussion

Andy Lawendel — Tue, 02 Sep 2025 16:52:19 -0000

Thank you, so it's possible to simply rebuild SDR++ to fix that... A.

Andy Lawendel posted a comment on ticket #73

Andy Lawendel — Tue, 02 Sep 2025 16:48:54 -0000

Oh, gosh, thank you, I assumed it was the previous version... Now I see your repo again it must be R5, forgive me! So I have to overwrite everything with R7... Andy

Cemaxecuter posted a comment on ticket #73

Cemaxecuter — Tue, 02 Sep 2025 15:52:12 -0000

This was identified and fixed in R7. Although you’re making me think more - I don’t think I updated an R6? Sent from Proton Mail for iOS On Tue, Sep 2, 2025 at 11:24 AM, Andy Lawendel wrote: [tickets:#73] satdump-ui crashes at launch in Noble R6 Status: open Milestone: 1.0 Labels: #satdump #crashes Created: Tue Sep 02, 2025 03:24 PM UTC by Andy Lawendel Last Updated: Tue Sep 02, 2025 03:24 PM UTC Owner: Cemaxecuter Hi! I have DragonOS Noble R6, but cannot get along...

Andy Lawendel posted a comment on discussion General Discussion

Andy Lawendel — Tue, 02 Sep 2025 15:47:40 -0000

Hi, I'm interested in a few SDR++ plugins which are quite complex to build from source and/or are missing a compatible .so binary. I'm thinking about three

Cemaxecuter posted a comment on discussion General Discussion

Cemaxecuter — Tue, 02 Sep 2025 15:41:43 -0000

Unfortunately not that I’ve documented - in R7 I added a PPA capability so that some updates can be pushed out via a private PPA. On your R6 build SatDump can be fixed - I’ll look back at my notes. There was a cmake flag I had left off which caused the failure where it’s looking in the wrong place. Sent from Proton Mail for iOS On Tue, Sep 2, 2025 at 11:29 AM, Andy Lawendel wrote: Hi! I'm currently on DragonOs Noble R6 and I've made a number of changes I'd like to...

Andy Lawendel posted a comment on discussion General Discussion

Andy Lawendel — Tue, 02 Sep 2025 15:29:07 -0000

Hi! I'm currently on DragonOs Noble R6 and I've made a number of changes I'd like to preserve (f.i. new modules in SDR++, things like that). Is there a practical way to move to R7 or greater without having to erase my customization?

Andy Lawendel created ticket #73

Andy Lawendel — Tue, 02 Sep 2025 15:24:54 -0000

satdump-ui crashes at launch in Noble R6

Cemaxecuter posted a comment on discussion General Discussion

Cemaxecuter — Tue, 26 Aug 2025 19:11:57 -0000

Noble is 24.04 based and the latest. FocalX (confusing name) is 22.04 based and older but does have a few applications not yet in Noble. The older Focal was 20.04 based. Sent from Proton Mail for iOS On Tue, Aug 26, 2025 at 2:51 PM, Jahari Lewis wrote: What is the difference? Why were they made? DragonOS Noble vs Focal Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/dragonos-focal/discussion/general/ To unsubscribe from further...

Jahari Lewis posted a comment on discussion General Discussion

Jahari Lewis — Tue, 26 Aug 2025 18:51:44 -0000

What is the difference? Why were they made?

DragonOS released /DragonOS_Noble_R7.iso

DragonOS — Sat, 02 Aug 2025 11:30:02 -0000

DragonOS released /DragonOS_Noble_R7.iso.sha256

DragonOS — Sat, 02 Aug 2025 11:25:04 -0000

DragonOS updated /README.txt

DragonOS — Sat, 02 Aug 2025 11:24:02 -0000

Cemaxecuter posted a comment on discussion General Discussion

Cemaxecuter — Wed, 16 Jul 2025 16:39:35 -0000

Unfortunately I do not have scripts. I do entering manually and maintain a long running host machine that I do all changes on. This results in a system that has a mixture of apt and source packages and combos that are not standard as I attempt to test each application and ensure it works together. So for example, bladerf drivers are kept up to date from source along with firmware and images on the OS and in turn various applications such as a special build of GR-osmocom is used. While this process...

J H posted a comment on discussion General Discussion

J H — Wed, 16 Jul 2025 16:26:58 -0000

I love Dragon OS and I certainly appreciate all the effort that went into creating it, but I highly prefer to run it on my native Ubuntu. Is there a possibility of sharing the scripts that were used to install the packages so I can create a full Ubuntu version?

Scott Martin posted a comment on discussion General Discussion

Scott Martin — Tue, 15 Jul 2025 17:16:56 -0000

Hi Cemaxecuter, What I ended up doing was setting up a dual boot with DragonOS_FocalX_R37.1 Thanks for the link to the fork, I will try it out and see what happens in DragonOS_Noble_R5. For now, R37.1 allows me to use QSpectrumAnalyzer and soapy_power until I can find an alternative tool in Noble_R5. Cheers.

Cemaxecuter posted a comment on discussion General Discussion

Cemaxecuter — Tue, 15 Jul 2025 03:07:01 -0000

You can try this fork which is at-least only 2 years old vs 8, but would need to build/install and test. https://github.com/dirkcgrunwald/soapy_power/commits/master/ Sent from Proton Mail for iOS On Thu, Jul 10, 2025 at 7:59 PM, Scott Martin wrote: Hi Cemaxecuter, So close to getting this back to where I was. When I execute, ~$ soapy_power -f 470.0M:608.0M -B 50.0k -n 19200 -d driver=rtlsdr -r 2000000.0 -w 2000000.0 -p 0 -g 18.0 -k 25 -F rtl_power_fftw --even --fft-window...

Cemaxecuter posted a comment on discussion General Discussion

Cemaxecuter — Tue, 15 Jul 2025 03:05:12 -0000

It’s more likely the python code you’re using and is not properly referencing Soapy as it should. You shouldn’t have to move soapysdr. I tested this not long ago. Simple soapy and soapy power you’re using is like 8 years old and just not updated to work correctly with newer python and/or soapy. Sent from Proton Mail for iOS On Thu, Jul 10, 2025 at 7:59 PM, Scott Martin wrote: Hi Cemaxecuter, So close to getting this back to where I was. When I execute, ~$ soapy_power...

Scott Martin posted a comment on discussion General Discussion

Scott Martin — Fri, 11 Jul 2025 19:11:57 -0000

Hi Cemaxecuter, I used build DragonOS_Noble_R5. Downloaded from SourceForge. Cheers.

Cemaxecuter posted a comment on discussion General Discussion

Cemaxecuter — Fri, 11 Jul 2025 18:17:26 -0000

Can you point to the repo you’re using? - if it’s the one I’m thinking of it may just be very old. Sent from Proton Mail for iOS On Fri, Jul 11, 2025 at 2:14 PM, Scott Martin wrote: Hi Cemaxecuter, I also booted up with the Live usb and checked with - ~$ SoapySDRUtil --info Same output as my last post, so pretty sure installing rtl-power-fftw didn't mess up anything. Searched around on the web, someone just copied the SoapySDR folder into the path that python was...

Scott Martin posted a comment on discussion General Discussion

Scott Martin — Fri, 11 Jul 2025 18:14:22 -0000

Hi Cemaxecuter, I also booted up with the Live usb and checked with - ~$ SoapySDRUtil --info Same output as my last post, so pretty sure installing rtl-power-fftw didn't mess up anything. Searched around on the web, someone just copied the SoapySDR folder into the path that python was looking for. Not sure if that would break future updates (probably). Is the fix as simple as adding this: ? export PYTHONPATH=$PYTHONPATH:/usr/local/lib/SoapySDR Or am I going to have to create a symlink? Not sure how...

Scott Martin posted a comment on discussion General Discussion

Scott Martin — Fri, 11 Jul 2025 00:35:13 -0000

Hi Cemaxecuter, Did some searching. ~$ SoapySDRUtil --info Soapy SDR -- the SDR abstraction library Lib Version: v0.8.1-4build1 API Version: v0.8.0 ABI Version: v0.8 Install root: /usr Search path: /usr/lib/x86_64-linux-gnu/SoapySDR/modules0.8 Search path: /usr/local/lib/x86_64-linux-gnu/SoapySDR/modules0.8 (missing) Search path: /usr/local/lib/SoapySDR/modules0.8 Module found: /usr/lib/x86_64-linux-gnu/SoapySDR/modules0.8/libRedPitaya.so (0.1.1) Module found: /usr/lib/x86_64-linux-gnu/SoapySDR/modules0.8/libairspySupport.so...

Scott Martin posted a comment on discussion General Discussion

Scott Martin — Thu, 10 Jul 2025 23:59:23 -0000

Hi Cemaxecuter, So close to getting this back to where I was. When I execute, ~$ soapy_power -f 470.0M:608.0M -B 50.0k -n 19200 -d driver=rtlsdr -r 2000000.0 -w 2000000.0 -p 0 -g 18.0 -k 25 -F rtl_power_fftw --even --fft-window boxcar --remove-dc I get this output. Traceback (most recent call last): File "/usr/local/bin/soapy_power", line 5, in from soapypower.main import main File "/usr/local/lib/python3.12/dist-packages/soapypower/main.py", line 5, in import simplesoapy File "/usr/local/lib/python3.12/dist-packages/simplesoapy.py",...

Scott Martin posted a comment on discussion General Discussion

Scott Martin — Wed, 09 Jul 2025 18:11:08 -0000

Hi Cemaxecuter. I installed a fresh version last night. This morning using GQRX for testing I first plugged in my old Terratec, which worked. Then I plugged in the Airspy mini, it too works. Plugged in the V4 Blog. It showed up in the drop down list as "RTLSDRBlog Blog V4 SN:00000001. Selected it, and was good to go. So yes, I can confirm it's good to go out of the box. I guess I borked it when I followed the website install instructions. Which now are no longer needed. Cheers.

Cemaxecuter modified a comment on discussion General Discussion

Cemaxecuter — Tue, 08 Jul 2025 23:46:22 -0000

Hi Scott. I'm looking all over for my V4, may have to order another to confirm. The drive in Noble I thought was from source, but it may be the release that was part of Noble. The v4 should've worked out of box. It's highly likely the install process described on the website removed key pieces I had taken care of and replaced, also there was a point where the drive moved back soversion, shown here https://github.com/osmocom/rtl-sdr/commit/7ebcb041f2ce887ef4d1a64607558889a86ff169 So what probably...

Cemaxecuter posted a comment on discussion General Discussion

Cemaxecuter — Tue, 08 Jul 2025 23:46:05 -0000

Hi Scott. I'm looking all over for my V2, may have to order another to confirm. The drive in Noble I thought was from source, but it may be the release that was part of Noble. The v4 should've worked out of box. It's highly likely the install process described on the website removed key pieces I had taken care of and replaced, also there was a point where the drive moved back soversion, shown here https://github.com/osmocom/rtl-sdr/commit/7ebcb041f2ce887ef4d1a64607558889a86ff169 So what probably...

Scott Martin posted a comment on discussion General Discussion

Scott Martin — Tue, 08 Jul 2025 21:50:48 -0000

Hi, Having issues getting my Rtl-Sdr V4 Blog going. Was wondering which rtl-sdr drivers come pre-installed with DragonOS 24.04 Noble. I know there is a modified Osmocom driver with enhancements for RTL-SDR Blog V3 and V4 units. Is that driver the one that comes already installed? I assumed that it didn't so I used the install directions from their website as I have before but it seems to break things. The pre-install process seems heavy handed in it's use of purge and rm. Cheers.

DragonOS updated /README.txt

DragonOS — Sun, 06 Jul 2025 19:42:02 -0000

DragonOS updated /README.txt

DragonOS — Thu, 03 Jul 2025 12:25:02 -0000

DragonOS released /DragonOS_Noble_R5.iso.sha256

DragonOS — Thu, 03 Jul 2025 12:25:02 -0000

DragonOS released /DragonOS_Noble_R5.iso

DragonOS — Thu, 03 Jul 2025 12:24:04 -0000

Cemaxecuter posted a comment on discussion General Discussion

Cemaxecuter — Thu, 03 Jul 2025 11:24:07 -0000

Tried a fork that had all the most recent PRs from people but ultimately ran into an issue with QT, tried modifying and had no luck yet. I’m willing to bet if you used a python virtual environment, say 3.11 or earlier, and within it pulled in q spectrum it may work? Sent from Proton Mail for iOS On Wed, Jul 2, 2025 at 7:27 PM, Scott Martin wrote: Cemaxecuter, No worries, glad you're willing to give it another look. If it's not possible I guess I will have to roll...

Scott Martin posted a comment on discussion General Discussion

Scott Martin — Wed, 02 Jul 2025 23:27:02 -0000

Cemaxecuter, No worries, glad you're willing to give it another look. If it's not possible I guess I will have to roll up my sleeves and see if I can pipe the output to PyQtGraph or some other plotter. Cheers.

Cemaxecuter posted a comment on discussion General Discussion

Cemaxecuter — Wed, 02 Jul 2025 18:30:13 -0000

Scott, I’ll give it a try again and see if there’s been any updates but I seem to recall having an issue with it building on 24.04. Give me a couple days, I’m trying to get a new ISO uploaded anyways with HydraSDR support. Sent from Proton Mail for iOS On Wed, Jul 2, 2025 at 2:11 PM, Scott Martin wrote: I am looking at the install list for DragonOS_Noble_R4 and see that QspectrumAnalyzer will not be installed. Is Qspectrumanalyzer being dropped, or are there plans...