https://sourceforge.net/p/p3d/bugs/Recent changes to bugsenMon, 04 Apr 2011 13:06:23 -0000https://sourceforge.net/p/p3d/bugs/36/The 'undo all' function does not reset the line list properly when it is used. As a result lines, which should no more be in the list, are nevertheless later used when fitting a polynomial. Christer SandinMon, 04 Apr 2011 13:06:23 -0000https://sourceforge.net157c0ffd1c74f64b0241071477e64560101d7fb2https://sourceforge.net/p/p3d/bugs/35/ Hello again, I am using the option to extract with an optimal extraction, using mp-deconvolution, adding in a cosmics mask file that I determined outside of p3d. That never happens, however, as I get the following error message: p3d\_misc\_read\_params: Read daxis=" 2" \(->integer\). p3d\_misc\_read\_params: Read ndetector=" 3" \(->integer\). p3d\_misc\_detsec: Using DETSEC=\[1:2147,1:4096\] \[instrument default\], xbin,ybin=1,1. p3d\_misc\_read\_params: Read spnum\_1=" 320" \(->integer\). p3d\_misc\_read\_params: Read profwidth\_ctex=" 8.0" \(->float \) \[default\]. p3d\_extract: Extraction method is: optimal p3d\_extract: Extracting spectra in the object data \[no beam switching\]. % P3D\_EXTRACT\_OPTIMAL: CRMASK \[2147,4096\] must have the same dimensions as the input image IM \[4096,2147\]. I have tested that if I add the line crmask = tranpose\(crmask\) in line 528 of p3d\_extract\_prepare\_extraction.pro then the error message goes away. As expected, the cosmics stay in, however, as presumably this is not the right transformation. Contact me if you need more information. Cheers, Jakob jwalcher@aip.de AnonymousFri, 21 Jan 2011 22:24:34 -0000https://sourceforge.net8f61b5a51f9f48eba457450276858043db3960b2https://sourceforge.net/p/p3d/bugs/34/ When I attempt to reduce ARGUS data and use optimal extraction, p3d seems to get stuck in an infinite loop. I get the following output when I stop it with CTRL-C: p3d\_misc\_read\_params: Read deadfibersfile\_1="flames\_argus\_dead.dat" \[default\]. p3d\_tracing\_calculate\_lprofs: Line profile function: gaussian p3d\_tracing\_calculate\_lprofs: Use minimum value at the lower and upper ends of the data: yes p3d\_tracing\_calculate\_lprofs: Fitting profile center positions in addition to intensities: yes p3d\_tracing\_calculate\_lprofs: Allowed offset when fitting profile center positions 0.50 \[px\] % Interrupt encountered. % Interrupted at: P3D\_TRACING\_CALCULATE\_LPROFS 850 /Users/jwalcher/IDLWorkspace/Default/p3d/routines/p3d\_tracing\_calculate\_lprofs.pro IDL> print, i 152386 Let me know if you need help reproducing this. Best wishes and thanks, Jakob \(jwalcher@aip.de\) AnonymousFri, 21 Jan 2011 13:02:11 -0000https://sourceforge.netfa24d11bd78acb2ee3cbbf1bde5e5600e935400chttps://sourceforge.net/p/p3d/bugs/33/Using GMOS-S \(red slit\) the profile fitting \(which is necessary to perform a cross-talk correction\) fails for some profiles in the vicinity of dead fibers. This means that these spectra won't be extracted. I have to look for the reason...in p3d\_tracing\_calculate\_profs.pro /CSChrister SandinThu, 02 Sep 2010 14:00:22 -0000https://sourceforge.net0e28b19a5958fc36b6e246e2137141bd7c815d9dhttps://sourceforge.net/p/p3d/bugs/32/Hello, I am trying several options for the creation of the flat mask. When I have the extraction method to "tophat" then I do not get any problem but when I use methodextract=optimal and optexmethod=modhorne I get the following error in my terminal \(debugging mode, and also appears with optexmethod=mp-deconvolution\): p3d\_misc\_detsec: \[combined data file\], xbin,ybin=2,2. % Variable is undefined: NEXTENSIONS. % Execution halted at: P3D\_TRACING\_CALCULATE\_LPROFS 297 /mnt/datos/ami/IAA/CODIGOS/p3d/routines/p3d\_tracing\_calculate\_lprofs.pro % P3D\_CTRACE 484 /mnt/datos/ami/IAA/CODIGOS/p3d/p3d\_ctrace.pro % P3D\_CFLATF 439 /mnt/datos/ami/IAA/CODIGOS/p3d/p3d\_cflatf.pro % P3D\_GUI\_EVENT 3210 /mnt/datos/ami/IAA/CODIGOS/p3d/routines/p3d\_gui.pro % WIDGET\_PROCESS\_EVENTS % $MAIN$ Additional info: \- setup: LARR, new CCD \- platform: Linux \(Fedora\) \- Versions of the routines where I get the error: p3d\_tracing\_calculate\_lprofs $Id: p3d\_tracing\_calculate\_lprofs.pro 230 2010-06-18 21:17:29Z christer sandin $ p3d\_ctrace $Id: p3d\_ctrace.pro 109 2010-03-11 16:48:11Z christersandin $ p3d\_cflatf $Id: p3d\_cflatf.pro 210 2010-05-27 15:25:56Z christersandin $ AnonymousFri, 13 Aug 2010 11:15:14 -0000https://sourceforge.net9645b9b25651c7f2fbb96f48c469701f1e1a5e75https://sourceforge.net/p/p3d/bugs/31/Hello, I am creating several bias with the same set of images. When using the default and median options it works perfectly. However, when using the average option I get the following error \(copy & paste from what I get on my screen with the debug option\): % READFITS: Now reading 1055 by 1035 array % XMANAGER: Caught unexpected error from client application. Message follows... % Keyword DIMENSION not allowed in call to: TOTAL % Execution halted at: P3D\_MISC\_IMCOMBINE 531 /mnt/datos/ami/IAA/CODIGOS/p3d/routines/p3d\_misc\_imcombine.pro % P3D\_MISC\_IMCOMBINE\_WRAPPER 584 /mnt/datos/ami/IAA/CODIGOS/p3d/routines/p3d\_misc\_imcombine\_wrapper.pro % P3D\_CMBIAS 270 /mnt/datos/ami/IAA/CODIGOS/p3d/p3d\_cmbias.pro % P3D\_GUI\_EVENT 2499 /mnt/datos/ami/IAA/CODIGOS/p3d/routines/p3d\_gui.pro % XMANAGER\_EVLOOP\_STANDARD 478 /usr/local/itt/idl70/lib/xmanager.pro % XMANAGER 708 /usr/local/itt/idl70/lib/xmanager.pro % P3D\_GUI\_POSITION\_NEW\_FILE 1216 /mnt/datos/ami/IAA/CODIGOS/p3d/routines/p3d\_gui.pro % P3D\_GUI\_EVENT 2575 /mnt/datos/ami/IAA/CODIGOS/p3d/routines/p3d\_gui.pro % $MAIN$ \- setup: LARR, new CCD \- platform: Linux \(Fedora\) \- Versions of the routines where I get the error: p3d\_misc\_imcombine\_wrapper $Id: p3d\_misc\_imcombine\_wrapper.pro 217 2010-06-17 13:04:15Z christersa ndin $ p3d\_cmbias $Id: p3d\_cmbias.pro 217 2010-06-17 13:04:15Z christersandin $ p3d\_misc\_logger $Id: p3d\_misc\_logger.pro 79 2010-03-04 14:24:25Z christersandin $ Note: version for p3d\_misc\_logger not said when typing the name of the routine \(as it happened with the others\). Instead I looked at the \*.pro file itself.AnonymousFri, 13 Aug 2010 09:20:38 -0000https://sourceforge.net19cb48021ba9fbe690c142b616118189684611e3https://sourceforge.net/p/p3d/bugs/30/Hello, I want to always use a cleaned line list for wavelenght calibration, so I put it in my user\_p3d.prm file. Like this: lampsfile\_dm /mnt/datos/ami/IAA/DATA/PMAS\_mar10/100325/lineas\_hgneB.dat It looks that p3d read it. But then a small window appear and disappar \(not time to read it and to make a snapshot to be attached\) and another window appear asking me again for the line list. From what I read in my terminal \(and which I will copy below, using "debug" and "print the maximun information" options, I have the impression that p3d reads the file but does not want to use it unless one explicitly select it in the second window. \- setup that I have: LARR, new CCD as said in the summary \- platform: Linux \(Fedora\) \- Copy & Paste from what I get on the screen: IDL> % READCOL: Skipping Line 36 % READCOL: Skipping Line 38 % READCOL: Skipping Line 47 % READCOL: Skipping Line 49 % READCOL: Skipping Line 59 % READCOL: Skipping Line 70 % READCOL: Skipping Line 80 % READCOL: Skipping Line 86 % READCOL: Skipping Line 95 % READCOL: Skipping Line 99 % READCOL: Skipping Line 103 % READCOL: Skipping Line 109 % READCOL: Skipping Line 119 % READCOL: Skipping Line 126 % READCOL: Skipping Line 136 % READCOL: Skipping Line 148 % READCOL: Skipping Line 152 % READCOL: Skipping Line 191 % READCOL: Skipping Line 195 % READCOL: Skipping Line 230 % READCOL: Skipping Line 234 % READCOL: 7 valid lines read p3d\_misc\_read\_params: Read blocksfx\_1=" a" \[default\]. % READCOL: Skipping Line 36 % READCOL: Skipping Line 38 % READCOL: Skipping Line 47 % READCOL: Skipping Line 49 % READCOL: Skipping Line 59 % READCOL: Skipping Line 70 % READCOL: Skipping Line 80 % READCOL: Skipping Line 86 % READCOL: Skipping Line 95 % READCOL: Skipping Line 99 % READCOL: Skipping Line 103 % READCOL: Skipping Line 109 % READCOL: Skipping Line 119 % READCOL: Skipping Line 126 % READCOL: Skipping Line 136 % READCOL: Skipping Line 148 % READCOL: Skipping Line 152 % READCOL: Skipping Line 191 % READCOL: Skipping Line 195 % READCOL: Skipping Line 230 % READCOL: Skipping Line 234 % READCOL: 7 valid lines read p3d\_cdmask: p3d\_cdmask: ==============================-------------------- p3d\_cdmask: ========== Creating a dispersion mask p3d\_cdmask: ========== Tue Aug 10 17:11:13 2010 p3d\_cdmask: ==============================-------------------- % READCOL: Skipping Line 18 % READCOL: Skipping Line 31 % READCOL: Skipping Line 32 % READCOL: Skipping Line 35 % READCOL: Skipping Line 86 % READCOL: Skipping Line 107 % READCOL: Skipping Line 108 % READCOL: Skipping Line 111 % READCOL: Skipping Line 129 % READCOL: Skipping Line 130 % READCOL: Skipping Line 133 % READCOL: Skipping Line 144 % READCOL: Skipping Line 145 % READCOL: Skipping Line 148 % READCOL: Skipping Line 155 % READCOL: 50 valid lines read p3d\_misc\_read\_params: Read daxis=" 1" \(->integer\). p3d\_misc\_read\_params: Read keywordsfile="pmas\_keywords.dat" \[default\]. p3d\_misc\_read\_params: Read gratingsfile\_dm="pmas\_gratings.dat" \[default\]. p3d\_misc\_read\_params: Read deadfibersfile="larr4k\_dead\_fibers.dat" \[default\]. % READCOL: 2 valid lines read p3d\_misc\_read\_params: Read postable="larr4k\_positions.dat" . p3d\_misc\_read\_postable: shape, nvertices, scale, xisw2e, xfac, yfac :: 0, 15, 1.00, 0, 1, 1 % READCOL: Skipping Line 2 % READCOL: Skipping Line 4 % READCOL: Skipping Line 13 % READCOL: Skipping Line 16 % READCOL: Skipping Line 19 % READCOL: 256 valid lines read p3d\_misc\_read\_postable: no use element id:s :: 1000000 p3d\_misc\_read\_postable: sky element id:s :: > 800000 p3d\_misc\_read\_postable: calibration element id:s :: > 900000 p3d\_misc\_read\_postable: Saving positions of science fibers. p3d\_misc\_read\_postable: Found 256 science elements in the position table file. p3d\_misc\_read\_postable: The output arrays contain totally 256 elements. p3d\_misc\_read\_params: Read lampsfile\_dm="/mnt/datos/ami/IAA/DATA/PMAS\_mar10/100325/lineas\_hgneB.dat" \[userparfile\]. % READCOL: Skipping Line 36 % READCOL: Skipping Line 38 % READCOL: Skipping Line 47 % READCOL: Skipping Line 49 % READCOL: Skipping Line 59 % READCOL: Skipping Line 70 % READCOL: Skipping Line 80 % READCOL: Skipping Line 86 % READCOL: Skipping Line 95 % READCOL: Skipping Line 99 % READCOL: Skipping Line 103 % READCOL: Skipping Line 109 % READCOL: Skipping Line 119 % READCOL: Skipping Line 126 % READCOL: Skipping Line 136 % READCOL: Skipping Line 148 % READCOL: Skipping Line 152 % READCOL: Skipping Line 191 % READCOL: Skipping Line 195 % READCOL: Skipping Line 230 % READCOL: Skipping Line 234 % READCOL: 7 valid lines read % READCOL: Skipping Line 18 % READCOL: Skipping Line 31 % READCOL: Skipping Line 32 % READCOL: Skipping Line 35 % READCOL: Skipping Line 86 % READCOL: Skipping Line 107 % READCOL: Skipping Line 108 % READCOL: Skipping Line 111 % READCOL: Skipping Line 129 % READCOL: Skipping Line 130 % READCOL: Skipping Line 133 % READCOL: Skipping Line 144 % READCOL: Skipping Line 145 % READCOL: Skipping Line 148 % READCOL: Skipping Line 155 % READCOL: 50 valid lines read p3d\_misc\_read\_params: Read daxis=" 1" \(->integer\). p3d\_misc\_read\_params: Read nblocks=" 4" \(->integer\). p3d\_misc\_read\_params: Read blocksfx\_1=" a" \[default\]. p3d\_misc\_read\_params: Read blocksfx\_2=" b" \[default\]. p3d\_misc\_read\_params: Read blocksfx\_3=" c" \[default\]. p3d\_misc\_read\_params: Read blocksfx\_4=" d" \[default\]. p3d\_misc\_read\_params: Read keywordsfile="pmas\_keywords.dat" \[default\]. % READCOL: Skipping Line 36 % READCOL: Skipping Line 38 % READCOL: Skipping Line 47 % READCOL: Skipping Line 49 % READCOL: Skipping Line 59 % READCOL: Skipping Line 70 % READCOL: Skipping Line 80 % READCOL: Skipping Line 86 % READCOL: Skipping Line 95 % READCOL: Skipping Line 99 % READCOL: Skipping Line 103 % READCOL: Skipping Line 109 % READCOL: Skipping Line 119 % READCOL: Skipping Line 126 % READCOL: Skipping Line 136 % READCOL: Skipping Line 148 % READCOL: Skipping Line 152 % READCOL: Skipping Line 191 % READCOL: Skipping Line 195 % READCOL: Skipping Line 230 % READCOL: Skipping Line 234 % READCOL: 7 valid lines read % READCOL: Skipping Line 18 % READCOL: Skipping Line 31 % READCOL: Skipping Line 32 % READCOL: Skipping Line 35 % READCOL: Skipping Line 86 % READCOL: Skipping Line 107 % READCOL: Skipping Line 108 % READCOL: Skipping Line 111 % READCOL: Skipping Line 129 % READCOL: Skipping Line 130 % READCOL: Skipping Line 133 % READCOL: Skipping Line 144 % READCOL: Skipping Line 145 % READCOL: Skipping Line 148 % READCOL: Skipping Line 155 % READCOL: 50 valid lines read p3d\_misc\_read\_params: Read daxis=" 1" \(->integer\). % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: Skipping Line 36 % READCOL: Skipping Line 38 % READCOL: Skipping Line 47 % READCOL: Skipping Line 49 % READCOL: Skipping Line 59 % READCOL: Skipping Line 70 % READCOL: Skipping Line 80 % READCOL: Skipping Line 86 % READCOL: Skipping Line 95 % READCOL: Skipping Line 99 % READCOL: Skipping Line 103 % READCOL: Skipping Line 109 % READCOL: Skipping Line 119 % READCOL: Skipping Line 126 % READCOL: Skipping Line 136 % READCOL: Skipping Line 148 % READCOL: Skipping Line 152 % READCOL: Skipping Line 191 % READCOL: Skipping Line 195 % READCOL: Skipping Line 230 % READCOL: Skipping Line 234 % READCOL: 7 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read p3d\_misc\_detsec: Using p3d\_misc\_detsec: DETSEC\_1=\[26:1049,1:1028\] p3d\_misc\_detsec: DETSEC\_2=\[2098:1075,1:1028\] p3d\_misc\_detsec: DETSEC\_3=\[2098:1075,2056:1029\] p3d\_misc\_detsec: DETSEC\_4=\[26:1049,2056:1029\] p3d\_misc\_detsec: \[instrument default\], xbin,ybin=2,2. % READFITS: Now reading 1055 by 1035 array % READFITS: Now reading 1055 by 1035 array % READFITS: Now reading 1055 by 1035 array % READFITS: Now reading 1055 by 1035 array p3d\_misc\_imcombine: Merging the data of all blocks. p3d\_misc\_imcombine: block 1/4 :: \[ 1:1049, 1:1028\] => \[ 1:1049, 1:1028\] p3d\_misc\_imcombine: block 2/4 :: Flipped the input data in the x-direction. p3d\_misc\_imcombine: block 2/4 :: \[ 7:1055, 1:1028\] => \[1050:2098, 1:1028\] p3d\_misc\_imcombine: block 3/4 :: Flipped the input data in the x-direction. p3d\_misc\_imcombine: block 3/4 :: Flipped the input data in the y-direction. p3d\_misc\_imcombine: block 3/4 :: \[ 7:1055, 8:1035\] => \[1050:2098,1029:2056\] p3d\_misc\_imcombine: block 4/4 :: Flipped the input data in the y-direction. p3d\_misc\_imcombine: block 4/4 :: \[ 1:1049, 8:1035\] => \[ 1:1049,1029:2056\] % READCOL: Skipping Line 36 % READCOL: Skipping Line 38 % READCOL: Skipping Line 47 % READCOL: Skipping Line 49 % READCOL: Skipping Line 59 % READCOL: Skipping Line 70 % READCOL: Skipping Line 80 % READCOL: Skipping Line 86 % READCOL: Skipping Line 95 % READCOL: Skipping Line 99 % READCOL: Skipping Line 103 % READCOL: Skipping Line 109 % READCOL: Skipping Line 119 % READCOL: Skipping Line 126 % READCOL: Skipping Line 136 % READCOL: Skipping Line 148 % READCOL: Skipping Line 152 % READCOL: Skipping Line 191 % READCOL: Skipping Line 195 % READCOL: Skipping Line 230 % READCOL: Skipping Line 234 % READCOL: 7 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read p3d\_misc\_getinformation: Read the following keywords from the instrument-specific header keywords file: p3d\_misc\_getinformation: KW\(GAIN\)="GAIN" \[e /ADU\], p3d\_misc\_getinformation: KW\(RDNOISE\)="RDNOISE" \[e\]. p3d\_misc\_getinformation: Read the following values: p3d\_misc\_getinformation: gain= 1.293e+00 \[e-/ADU\] \{data header\}, p3d\_misc\_getinformation: rdnoise= 2.225e+00 \[ADU\] \{data header\}. % READCOL: Skipping Line 36 % READCOL: Skipping Line 38 % READCOL: Skipping Line 47 % READCOL: Skipping Line 49 % READCOL: Skipping Line 59 % READCOL: Skipping Line 70 % READCOL: Skipping Line 80 % READCOL: Skipping Line 86 % READCOL: Skipping Line 95 % READCOL: Skipping Line 99 % READCOL: Skipping Line 103 % READCOL: Skipping Line 109 % READCOL: Skipping Line 119 % READCOL: Skipping Line 126 % READCOL: Skipping Line 136 % READCOL: Skipping Line 148 % READCOL: Skipping Line 152 % READCOL: Skipping Line 191 % READCOL: Skipping Line 195 % READCOL: Skipping Line 230 % READCOL: Skipping Line 234 % READCOL: 7 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read p3d\_misc\_getinformation: Read the following keywords from the instrument-specific header keywords file: p3d\_misc\_getinformation: KW\(GAIN\)="GAIN" \[e /ADU\], p3d\_misc\_getinformation: KW\(RDNOISE\)="RDNOISE" \[e\]. p3d\_misc\_getinformation: Read the following values: p3d\_misc\_getinformation: gain= 1.148e+00 \[e-/ADU\] \{data header\}, p3d\_misc\_getinformation: rdnoise= 2.378e+00 \[ADU\] \{data header\}. % READCOL: Skipping Line 36 % READCOL: Skipping Line 38 % READCOL: Skipping Line 47 % READCOL: Skipping Line 49 % READCOL: Skipping Line 59 % READCOL: Skipping Line 70 % READCOL: Skipping Line 80 % READCOL: Skipping Line 86 % READCOL: Skipping Line 95 % READCOL: Skipping Line 99 % READCOL: Skipping Line 103 % READCOL: Skipping Line 109 % READCOL: Skipping Line 119 % READCOL: Skipping Line 126 % READCOL: Skipping Line 136 % READCOL: Skipping Line 148 % READCOL: Skipping Line 152 % READCOL: Skipping Line 191 % READCOL: Skipping Line 195 % READCOL: Skipping Line 230 % READCOL: Skipping Line 234 % READCOL: 7 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read p3d\_misc\_getinformation: Read the following keywords from the instrument-specific header keywords file: p3d\_misc\_getinformation: KW\(GAIN\)="GAIN" \[e /ADU\], p3d\_misc\_getinformation: KW\(RDNOISE\)="RDNOISE" \[e\]. p3d\_misc\_getinformation: Read the following values: p3d\_misc\_getinformation: gain= 1.286e+00 \[e-/ADU\] \{data header\}, p3d\_misc\_getinformation: rdnoise= 2.220e+00 \[ADU\] \{data header\}. % READCOL: Skipping Line 36 % READCOL: Skipping Line 38 % READCOL: Skipping Line 47 % READCOL: Skipping Line 49 % READCOL: Skipping Line 59 % READCOL: Skipping Line 70 % READCOL: Skipping Line 80 % READCOL: Skipping Line 86 % READCOL: Skipping Line 95 % READCOL: Skipping Line 99 % READCOL: Skipping Line 103 % READCOL: Skipping Line 109 % READCOL: Skipping Line 119 % READCOL: Skipping Line 126 % READCOL: Skipping Line 136 % READCOL: Skipping Line 148 % READCOL: Skipping Line 152 % READCOL: Skipping Line 191 % READCOL: Skipping Line 195 % READCOL: Skipping Line 230 % READCOL: Skipping Line 234 % READCOL: 7 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read p3d\_misc\_getinformation: Read the following keywords from the instrument-specific header keywords file: p3d\_misc\_getinformation: KW\(GAIN\)="GAIN" \[e /ADU\], p3d\_misc\_getinformation: KW\(RDNOISE\)="RDNOISE" \[e\]. p3d\_misc\_getinformation: Read the following values: p3d\_misc\_getinformation: gain= 1.250e+00 \[e-/ADU\] \{data header\}, p3d\_misc\_getinformation: rdnoise= 2.056e+00 \[ADU\] \{data header\}. p3d\_misc\_mmodhdr: Got 4 input values on the gain for the different detector blocks: p3d\_misc\_mmodhdr: 1.2930, 1.1480, 1.2860, 1.2500 p3d\_misc\_mmodhdr: Calculated a mean value on the gain to replace these values: 1.2443 p3d\_misc\_mmodhdr: Normalized all blocks of the data to use the same gain value. p3d\_misc\_imcombine\_wrapper: Wrote the master arc file "run175\_00059\_imcmb.fits". % READCOL: Skipping Line 36 % READCOL: Skipping Line 38 % READCOL: Skipping Line 47 % READCOL: Skipping Line 49 % READCOL: Skipping Line 59 % READCOL: Skipping Line 70 % READCOL: Skipping Line 80 % READCOL: Skipping Line 86 % READCOL: Skipping Line 95 % READCOL: Skipping Line 99 % READCOL: Skipping Line 103 % READCOL: Skipping Line 109 % READCOL: Skipping Line 119 % READCOL: Skipping Line 126 % READCOL: Skipping Line 136 % READCOL: Skipping Line 148 % READCOL: Skipping Line 152 % READCOL: Skipping Line 191 % READCOL: Skipping Line 195 % READCOL: Skipping Line 230 % READCOL: Skipping Line 234 % READCOL: 7 valid lines read % READCOL: Skipping Line 36 % READCOL: Skipping Line 38 % READCOL: Skipping Line 47 % READCOL: Skipping Line 49 % READCOL: Skipping Line 59 % READCOL: Skipping Line 70 % READCOL: Skipping Line 80 % READCOL: Skipping Line 86 % READCOL: Skipping Line 95 % READCOL: Skipping Line 99 % READCOL: Skipping Line 103 % READCOL: Skipping Line 109 % READCOL: Skipping Line 119 % READCOL: Skipping Line 126 % READCOL: Skipping Line 136 % READCOL: Skipping Line 148 % READCOL: Skipping Line 152 % READCOL: Skipping Line 191 % READCOL: Skipping Line 195 % READCOL: Skipping Line 230 % READCOL: Skipping Line 234 % READCOL: 7 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read AnonymousTue, 10 Aug 2010 15:28:34 -0000https://sourceforge.net25d36c0168a11c9b58cb94eb4ac4a2205fb1fdcahttps://sourceforge.net/p/p3d/bugs/29/Hello, I want to always use a cleaned line list for wavelenght calibration, so I put it in my user\_p3d.prm file. Like this: lampsfile\_dm /mnt/datos/ami/IAA/DATA/PMAS\_mar10/100325/lineas\_hgneB.dat It looks that p3d read it. But then a small window appear and disappar \(not time to read it and to make a snapshot to be attached\) and another window appear asking me again for the line list. From what I read in my terminal \(and which I will copy below, using "debug" and "print the maximun information" options, I have the impression that p3d reads the file but does not want to use it unless one explicitly select it in the second window. \- setup that I have: LARR, new CCD as said in the summary \- platform: Linux \(Fedora\) \- Copy & Paste from what I get on the screen: IDL> % READCOL: Skipping Line 36 % READCOL: Skipping Line 38 % READCOL: Skipping Line 47 % READCOL: Skipping Line 49 % READCOL: Skipping Line 59 % READCOL: Skipping Line 70 % READCOL: Skipping Line 80 % READCOL: Skipping Line 86 % READCOL: Skipping Line 95 % READCOL: Skipping Line 99 % READCOL: Skipping Line 103 % READCOL: Skipping Line 109 % READCOL: Skipping Line 119 % READCOL: Skipping Line 126 % READCOL: Skipping Line 136 % READCOL: Skipping Line 148 % READCOL: Skipping Line 152 % READCOL: Skipping Line 191 % READCOL: Skipping Line 195 % READCOL: Skipping Line 230 % READCOL: Skipping Line 234 % READCOL: 7 valid lines read p3d\_misc\_read\_params: Read blocksfx\_1=" a" \[default\]. % READCOL: Skipping Line 36 % READCOL: Skipping Line 38 % READCOL: Skipping Line 47 % READCOL: Skipping Line 49 % READCOL: Skipping Line 59 % READCOL: Skipping Line 70 % READCOL: Skipping Line 80 % READCOL: Skipping Line 86 % READCOL: Skipping Line 95 % READCOL: Skipping Line 99 % READCOL: Skipping Line 103 % READCOL: Skipping Line 109 % READCOL: Skipping Line 119 % READCOL: Skipping Line 126 % READCOL: Skipping Line 136 % READCOL: Skipping Line 148 % READCOL: Skipping Line 152 % READCOL: Skipping Line 191 % READCOL: Skipping Line 195 % READCOL: Skipping Line 230 % READCOL: Skipping Line 234 % READCOL: 7 valid lines read p3d\_cdmask: p3d\_cdmask: ==============================-------------------- p3d\_cdmask: ========== Creating a dispersion mask p3d\_cdmask: ========== Tue Aug 10 17:11:13 2010 p3d\_cdmask: ==============================-------------------- % READCOL: Skipping Line 18 % READCOL: Skipping Line 31 % READCOL: Skipping Line 32 % READCOL: Skipping Line 35 % READCOL: Skipping Line 86 % READCOL: Skipping Line 107 % READCOL: Skipping Line 108 % READCOL: Skipping Line 111 % READCOL: Skipping Line 129 % READCOL: Skipping Line 130 % READCOL: Skipping Line 133 % READCOL: Skipping Line 144 % READCOL: Skipping Line 145 % READCOL: Skipping Line 148 % READCOL: Skipping Line 155 % READCOL: 50 valid lines read p3d\_misc\_read\_params: Read daxis=" 1" \(->integer\). p3d\_misc\_read\_params: Read keywordsfile="pmas\_keywords.dat" \[default\]. p3d\_misc\_read\_params: Read gratingsfile\_dm="pmas\_gratings.dat" \[default\]. p3d\_misc\_read\_params: Read deadfibersfile="larr4k\_dead\_fibers.dat" \[default\]. % READCOL: 2 valid lines read p3d\_misc\_read\_params: Read postable="larr4k\_positions.dat" . p3d\_misc\_read\_postable: shape, nvertices, scale, xisw2e, xfac, yfac :: 0, 15, 1.00, 0, 1, 1 % READCOL: Skipping Line 2 % READCOL: Skipping Line 4 % READCOL: Skipping Line 13 % READCOL: Skipping Line 16 % READCOL: Skipping Line 19 % READCOL: 256 valid lines read p3d\_misc\_read\_postable: no use element id:s :: 1000000 p3d\_misc\_read\_postable: sky element id:s :: > 800000 p3d\_misc\_read\_postable: calibration element id:s :: > 900000 p3d\_misc\_read\_postable: Saving positions of science fibers. p3d\_misc\_read\_postable: Found 256 science elements in the position table file. p3d\_misc\_read\_postable: The output arrays contain totally 256 elements. p3d\_misc\_read\_params: Read lampsfile\_dm="/mnt/datos/ami/IAA/DATA/PMAS\_mar10/100325/lineas\_hgneB.dat" \[userparfile\]. % READCOL: Skipping Line 36 % READCOL: Skipping Line 38 % READCOL: Skipping Line 47 % READCOL: Skipping Line 49 % READCOL: Skipping Line 59 % READCOL: Skipping Line 70 % READCOL: Skipping Line 80 % READCOL: Skipping Line 86 % READCOL: Skipping Line 95 % READCOL: Skipping Line 99 % READCOL: Skipping Line 103 % READCOL: Skipping Line 109 % READCOL: Skipping Line 119 % READCOL: Skipping Line 126 % READCOL: Skipping Line 136 % READCOL: Skipping Line 148 % READCOL: Skipping Line 152 % READCOL: Skipping Line 191 % READCOL: Skipping Line 195 % READCOL: Skipping Line 230 % READCOL: Skipping Line 234 % READCOL: 7 valid lines read % READCOL: Skipping Line 18 % READCOL: Skipping Line 31 % READCOL: Skipping Line 32 % READCOL: Skipping Line 35 % READCOL: Skipping Line 86 % READCOL: Skipping Line 107 % READCOL: Skipping Line 108 % READCOL: Skipping Line 111 % READCOL: Skipping Line 129 % READCOL: Skipping Line 130 % READCOL: Skipping Line 133 % READCOL: Skipping Line 144 % READCOL: Skipping Line 145 % READCOL: Skipping Line 148 % READCOL: Skipping Line 155 % READCOL: 50 valid lines read p3d\_misc\_read\_params: Read daxis=" 1" \(->integer\). p3d\_misc\_read\_params: Read nblocks=" 4" \(->integer\). p3d\_misc\_read\_params: Read blocksfx\_1=" a" \[default\]. p3d\_misc\_read\_params: Read blocksfx\_2=" b" \[default\]. p3d\_misc\_read\_params: Read blocksfx\_3=" c" \[default\]. p3d\_misc\_read\_params: Read blocksfx\_4=" d" \[default\]. p3d\_misc\_read\_params: Read keywordsfile="pmas\_keywords.dat" \[default\]. % READCOL: Skipping Line 36 % READCOL: Skipping Line 38 % READCOL: Skipping Line 47 % READCOL: Skipping Line 49 % READCOL: Skipping Line 59 % READCOL: Skipping Line 70 % READCOL: Skipping Line 80 % READCOL: Skipping Line 86 % READCOL: Skipping Line 95 % READCOL: Skipping Line 99 % READCOL: Skipping Line 103 % READCOL: Skipping Line 109 % READCOL: Skipping Line 119 % READCOL: Skipping Line 126 % READCOL: Skipping Line 136 % READCOL: Skipping Line 148 % READCOL: Skipping Line 152 % READCOL: Skipping Line 191 % READCOL: Skipping Line 195 % READCOL: Skipping Line 230 % READCOL: Skipping Line 234 % READCOL: 7 valid lines read % READCOL: Skipping Line 18 % READCOL: Skipping Line 31 % READCOL: Skipping Line 32 % READCOL: Skipping Line 35 % READCOL: Skipping Line 86 % READCOL: Skipping Line 107 % READCOL: Skipping Line 108 % READCOL: Skipping Line 111 % READCOL: Skipping Line 129 % READCOL: Skipping Line 130 % READCOL: Skipping Line 133 % READCOL: Skipping Line 144 % READCOL: Skipping Line 145 % READCOL: Skipping Line 148 % READCOL: Skipping Line 155 % READCOL: 50 valid lines read p3d\_misc\_read\_params: Read daxis=" 1" \(->integer\). % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: Skipping Line 36 % READCOL: Skipping Line 38 % READCOL: Skipping Line 47 % READCOL: Skipping Line 49 % READCOL: Skipping Line 59 % READCOL: Skipping Line 70 % READCOL: Skipping Line 80 % READCOL: Skipping Line 86 % READCOL: Skipping Line 95 % READCOL: Skipping Line 99 % READCOL: Skipping Line 103 % READCOL: Skipping Line 109 % READCOL: Skipping Line 119 % READCOL: Skipping Line 126 % READCOL: Skipping Line 136 % READCOL: Skipping Line 148 % READCOL: Skipping Line 152 % READCOL: Skipping Line 191 % READCOL: Skipping Line 195 % READCOL: Skipping Line 230 % READCOL: Skipping Line 234 % READCOL: 7 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read p3d\_misc\_detsec: Using p3d\_misc\_detsec: DETSEC\_1=\[26:1049,1:1028\] p3d\_misc\_detsec: DETSEC\_2=\[2098:1075,1:1028\] p3d\_misc\_detsec: DETSEC\_3=\[2098:1075,2056:1029\] p3d\_misc\_detsec: DETSEC\_4=\[26:1049,2056:1029\] p3d\_misc\_detsec: \[instrument default\], xbin,ybin=2,2. % READFITS: Now reading 1055 by 1035 array % READFITS: Now reading 1055 by 1035 array % READFITS: Now reading 1055 by 1035 array % READFITS: Now reading 1055 by 1035 array p3d\_misc\_imcombine: Merging the data of all blocks. p3d\_misc\_imcombine: block 1/4 :: \[ 1:1049, 1:1028\] => \[ 1:1049, 1:1028\] p3d\_misc\_imcombine: block 2/4 :: Flipped the input data in the x-direction. p3d\_misc\_imcombine: block 2/4 :: \[ 7:1055, 1:1028\] => \[1050:2098, 1:1028\] p3d\_misc\_imcombine: block 3/4 :: Flipped the input data in the x-direction. p3d\_misc\_imcombine: block 3/4 :: Flipped the input data in the y-direction. p3d\_misc\_imcombine: block 3/4 :: \[ 7:1055, 8:1035\] => \[1050:2098,1029:2056\] p3d\_misc\_imcombine: block 4/4 :: Flipped the input data in the y-direction. p3d\_misc\_imcombine: block 4/4 :: \[ 1:1049, 8:1035\] => \[ 1:1049,1029:2056\] % READCOL: Skipping Line 36 % READCOL: Skipping Line 38 % READCOL: Skipping Line 47 % READCOL: Skipping Line 49 % READCOL: Skipping Line 59 % READCOL: Skipping Line 70 % READCOL: Skipping Line 80 % READCOL: Skipping Line 86 % READCOL: Skipping Line 95 % READCOL: Skipping Line 99 % READCOL: Skipping Line 103 % READCOL: Skipping Line 109 % READCOL: Skipping Line 119 % READCOL: Skipping Line 126 % READCOL: Skipping Line 136 % READCOL: Skipping Line 148 % READCOL: Skipping Line 152 % READCOL: Skipping Line 191 % READCOL: Skipping Line 195 % READCOL: Skipping Line 230 % READCOL: Skipping Line 234 % READCOL: 7 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read p3d\_misc\_getinformation: Read the following keywords from the instrument-specific header keywords file: p3d\_misc\_getinformation: KW\(GAIN\)="GAIN" \[e /ADU\], p3d\_misc\_getinformation: KW\(RDNOISE\)="RDNOISE" \[e\]. p3d\_misc\_getinformation: Read the following values: p3d\_misc\_getinformation: gain= 1.293e+00 \[e-/ADU\] \{data header\}, p3d\_misc\_getinformation: rdnoise= 2.225e+00 \[ADU\] \{data header\}. % READCOL: Skipping Line 36 % READCOL: Skipping Line 38 % READCOL: Skipping Line 47 % READCOL: Skipping Line 49 % READCOL: Skipping Line 59 % READCOL: Skipping Line 70 % READCOL: Skipping Line 80 % READCOL: Skipping Line 86 % READCOL: Skipping Line 95 % READCOL: Skipping Line 99 % READCOL: Skipping Line 103 % READCOL: Skipping Line 109 % READCOL: Skipping Line 119 % READCOL: Skipping Line 126 % READCOL: Skipping Line 136 % READCOL: Skipping Line 148 % READCOL: Skipping Line 152 % READCOL: Skipping Line 191 % READCOL: Skipping Line 195 % READCOL: Skipping Line 230 % READCOL: Skipping Line 234 % READCOL: 7 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read p3d\_misc\_getinformation: Read the following keywords from the instrument-specific header keywords file: p3d\_misc\_getinformation: KW\(GAIN\)="GAIN" \[e /ADU\], p3d\_misc\_getinformation: KW\(RDNOISE\)="RDNOISE" \[e\]. p3d\_misc\_getinformation: Read the following values: p3d\_misc\_getinformation: gain= 1.148e+00 \[e-/ADU\] \{data header\}, p3d\_misc\_getinformation: rdnoise= 2.378e+00 \[ADU\] \{data header\}. % READCOL: Skipping Line 36 % READCOL: Skipping Line 38 % READCOL: Skipping Line 47 % READCOL: Skipping Line 49 % READCOL: Skipping Line 59 % READCOL: Skipping Line 70 % READCOL: Skipping Line 80 % READCOL: Skipping Line 86 % READCOL: Skipping Line 95 % READCOL: Skipping Line 99 % READCOL: Skipping Line 103 % READCOL: Skipping Line 109 % READCOL: Skipping Line 119 % READCOL: Skipping Line 126 % READCOL: Skipping Line 136 % READCOL: Skipping Line 148 % READCOL: Skipping Line 152 % READCOL: Skipping Line 191 % READCOL: Skipping Line 195 % READCOL: Skipping Line 230 % READCOL: Skipping Line 234 % READCOL: 7 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read p3d\_misc\_getinformation: Read the following keywords from the instrument-specific header keywords file: p3d\_misc\_getinformation: KW\(GAIN\)="GAIN" \[e /ADU\], p3d\_misc\_getinformation: KW\(RDNOISE\)="RDNOISE" \[e\]. p3d\_misc\_getinformation: Read the following values: p3d\_misc\_getinformation: gain= 1.286e+00 \[e-/ADU\] \{data header\}, p3d\_misc\_getinformation: rdnoise= 2.220e+00 \[ADU\] \{data header\}. % READCOL: Skipping Line 36 % READCOL: Skipping Line 38 % READCOL: Skipping Line 47 % READCOL: Skipping Line 49 % READCOL: Skipping Line 59 % READCOL: Skipping Line 70 % READCOL: Skipping Line 80 % READCOL: Skipping Line 86 % READCOL: Skipping Line 95 % READCOL: Skipping Line 99 % READCOL: Skipping Line 103 % READCOL: Skipping Line 109 % READCOL: Skipping Line 119 % READCOL: Skipping Line 126 % READCOL: Skipping Line 136 % READCOL: Skipping Line 148 % READCOL: Skipping Line 152 % READCOL: Skipping Line 191 % READCOL: Skipping Line 195 % READCOL: Skipping Line 230 % READCOL: Skipping Line 234 % READCOL: 7 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read p3d\_misc\_getinformation: Read the following keywords from the instrument-specific header keywords file: p3d\_misc\_getinformation: KW\(GAIN\)="GAIN" \[e /ADU\], p3d\_misc\_getinformation: KW\(RDNOISE\)="RDNOISE" \[e\]. p3d\_misc\_getinformation: Read the following values: p3d\_misc\_getinformation: gain= 1.250e+00 \[e-/ADU\] \{data header\}, p3d\_misc\_getinformation: rdnoise= 2.056e+00 \[ADU\] \{data header\}. p3d\_misc\_mmodhdr: Got 4 input values on the gain for the different detector blocks: p3d\_misc\_mmodhdr: 1.2930, 1.1480, 1.2860, 1.2500 p3d\_misc\_mmodhdr: Calculated a mean value on the gain to replace these values: 1.2443 p3d\_misc\_mmodhdr: Normalized all blocks of the data to use the same gain value. p3d\_misc\_imcombine\_wrapper: Wrote the master arc file "run175\_00059\_imcmb.fits". % READCOL: Skipping Line 36 % READCOL: Skipping Line 38 % READCOL: Skipping Line 47 % READCOL: Skipping Line 49 % READCOL: Skipping Line 59 % READCOL: Skipping Line 70 % READCOL: Skipping Line 80 % READCOL: Skipping Line 86 % READCOL: Skipping Line 95 % READCOL: Skipping Line 99 % READCOL: Skipping Line 103 % READCOL: Skipping Line 109 % READCOL: Skipping Line 119 % READCOL: Skipping Line 126 % READCOL: Skipping Line 136 % READCOL: Skipping Line 148 % READCOL: Skipping Line 152 % READCOL: Skipping Line 191 % READCOL: Skipping Line 195 % READCOL: Skipping Line 230 % READCOL: Skipping Line 234 % READCOL: 7 valid lines read % READCOL: Skipping Line 36 % READCOL: Skipping Line 38 % READCOL: Skipping Line 47 % READCOL: Skipping Line 49 % READCOL: Skipping Line 59 % READCOL: Skipping Line 70 % READCOL: Skipping Line 80 % READCOL: Skipping Line 86 % READCOL: Skipping Line 95 % READCOL: Skipping Line 99 % READCOL: Skipping Line 103 % READCOL: Skipping Line 109 % READCOL: Skipping Line 119 % READCOL: Skipping Line 126 % READCOL: Skipping Line 136 % READCOL: Skipping Line 148 % READCOL: Skipping Line 152 % READCOL: Skipping Line 191 % READCOL: Skipping Line 195 % READCOL: Skipping Line 230 % READCOL: Skipping Line 234 % READCOL: 7 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read % READCOL: 16 valid lines read AnonymousTue, 10 Aug 2010 15:14:19 -0000https://sourceforge.net254c902bcad5d32a082eef7d8ca850c9687ff54dhttps://sourceforge.net/p/p3d/bugs/28/I add here some extra information about the previous bug since I do not know how to modify it. \- Information that I get on the screen with the debug option % Variable is undefined: NEXTENSIONS. % Execution halted at: P3D\_EXTRACT 604 /mnt/datos/ami/IAA/CODIGOS/p3d/routines/p3d\_extract.pro % P3D\_CDMASK 583 /mnt/datos/ami/IAA/CODIGOS/p3d/p3d\_cdmask.pro % P3D\_GUI\_EVENT 2883 /mnt/datos/ami/IAA/CODIGOS/p3d/routines/p3d\_gui.pro % WIDGET\_PROCESS\_EVENTS % $MAIN$ \- p3d\_extract version \(copy and paste from what I get when typing p3d\_extract\): NAME: p3d\_extract $Id: p3d\_extract.pro 235 2010-07-15 11:25:12Z christersandin $ \- Same for p3d\_cdmask: p3d\_cdmask $Id: p3d\_cdmask.pro 225 2010-06-18 16:51:16Z christersandin $ \- Same for p3d\_gui: NAME: p3d\_gui $Id: p3d\_gui.pro 236 2010-07-15 11:27:20Z christersandin $ \- setup: LARR, new CCD as said in the summary \- platform: Linux \(Fedora\) \- As displayed in the previous attached image, it should said NEXTENSIONS instead of NEXTINSIONS AnonymousWed, 04 Aug 2010 13:47:09 -0000https://sourceforge.net131ca8896b8bb68bcfaf854f4ef1b489db2991e4https://sourceforge.net/p/p3d/bugs/27/I add here some extra information about the previous bug since I do not know how to modify it. \- Information that I get on the screen with the debug option % Variable is undefined: NEXTENSIONS. % Execution halted at: P3D\_EXTRACT 604 /mnt/datos/ami/IAA/CODIGOS/p3d/routines/p3d\_extract.pro % P3D\_CDMASK 583 /mnt/datos/ami/IAA/CODIGOS/p3d/p3d\_cdmask.pro % P3D\_GUI\_EVENT 2883 /mnt/datos/ami/IAA/CODIGOS/p3d/routines/p3d\_gui.pro % WIDGET\_PROCESS\_EVENTS % $MAIN$ \- p3d\_extract version \(copy and paste from what I get when typing p3d\_extract\): NAME: p3d\_extract $Id: p3d\_extract.pro 235 2010-07-15 11:25:12Z christersandin $ \- Same for p3d\_cdmask: p3d\_cdmask $Id: p3d\_cdmask.pro 225 2010-06-18 16:51:16Z christersandin $ \- Same for p3d\_gui: NAME: p3d\_gui $Id: p3d\_gui.pro 236 2010-07-15 11:27:20Z christersandin $ \- setup: LARR, new CCD as said in the summary \- platform: Linux \(Fedora\) \- As displayed in the previous attached image, it should said NEXTENSIONS instead of NEXTINSIONS AnonymousWed, 04 Aug 2010 13:22:30 -0000https://sourceforge.net056023389f06f6546782376bbfd3ca936a6725b2