Open Source Assembly Electronic Design Automation (EDA) Software

PICSimLab is a realtime emulator of development boards with MPLABX/avr-gdb debugger integration. PICSimLab supports microcontrollers from picsim, simavr, uCsim, qemu-stm32, qemu-esp32, and gpsim. PICSimLab has integration with MPLABX/Arduino IDE for programming the microcontroller's boards. As the purpose of PICSimLab is to emulate real hardware it does not have any source code editing support. For code editing and debugging the same tools used for a real board should be used with PICSimLab, such as MPLABX, Arduino IDE, or VSCode with PlatformIO. PICSimLab supports several devices (spare parts) that can be connected to the boards for simulation. Such as example LEDs and push buttons for simple outputs and inputs and some more complex ones like the ethernet shield w5500 for internet connection or the color graphic display ili9340 with touchscreen. The complete list of parts can be accessed in the documentation. Documentation at https://lcgamboa.github.io/picsimlab_docs/stable/

a firmware for AVR910 programmer. started from ver3.8 (http://www.mikrocontroller-projekte.de/Mikrocontroller/AVR-Prog/AVR-Programmer.html) upgraded for speed and reliability. provided generic masterSPI interface please mail me on AlexRainPE196@hotbox.ru

8051lib is a collection of easy-to-use C Functions and Assemble Languages Sets for the 8051 microcontroller. The Final Goal is to make the microcontroller developer focus on the Algorithms not the Hardware Drivers.

"DSO" is a Digital Signal Oscilloscope. My DSO will be connected via the USB to the PC. All software to operate the DSO is developed within this project.

The goal of this project is to build a centralized domotic system. This project contents three parts: - An electronic part; - An embedded software part (PIC Microship controller); - A PC software part (Dotnet/Mono)

Digital Signal Processing Block Diagram Compiler - user extendable to all DSP's, but presently supports only the TI C2000 family. Rich support for fixed point arithmetic, both saturated and unsaturated. Block diagram entry is via TinyCAD (included).

EDA / PCB software to envelope and manufacture printed circuit boards

MOPPI (Multiple OPerations Per Instruction) is a simple machine simulator written in C++. It will include assembler, loader, and simulator components that allow a user to experience the entire process of developing a simple microprocessor based simulator

OpenVGA is an free and open FPGA-based implementation of a VGA compatible graphics adapter, and utilising low-cost hardware. The project includes the PCB schematic and artwork, Verilog HDL, firmware assembly code, and driver source code.

Design and implementation of silicon and software for baseband processors conforming to IEEE wireless standards. Initial focus on WiMAX and WiFi.

PicOload is a programmer and a bootloader that allow to program a PIC 16f87X / 16f87XA using a RS232 serial line whithout leaving the chip from his support and without disturbing the rest of the device

QUASI is stand-alone AVR RISC processor simulator with debugging features, EDA-like GUI and plugin interface.

SDL REFLEX is the micro kernel of a real time operating system for the AVR microcontroller family. The kernel is especially designed to implement systems described in SDL – “The Specification and Description Language” . Compiler GNU ANSI-C for AVR v.3.3

SECU86 is Standard Engine Control Unit x86. The project goal is to develop a standard computer and OS (opensource) that would work on any car. It'll be based on the x86 processor and will try to replace the poor standard ECU that comes with any car.

vcomp is a verilog compiler for x86 linux targets - it was a commercial product which is now in the process of being GPL'd

asfpga is an assembler written for use in FPGA design. It can be easily modified for your instruction set. The ultimate goal of this software is to allow a FPGA designer to easily write assembly code for a custom instruction set. The current version al

GNU PIC LIBRARY PROJECT The interest of this project is to develop a set of Libraries that are released in LGPL License to use to PIC microcontroler programming. Then any program resulted by this use would be a proprietary or free softwares.

GPICD - The GNU PIC Programmer and In-Circuit Debugger. GPICD is an open-source Programmer and In-Circuit debugger for the Microchip (TM) PIC (TM) family of microcontrollers. It is an ideal complement for the gputils development tool set.

The ixo.de USB JTAG pod and firmware allows to access JTAG-capable chips via USB and a protocol like Altera USB-Blaster.

PPort is a simple yet handy automation program and its documented counterpart for interfacing a PC with external devices. With this bundle, one can control any household appliance or electronic device with minimal hassle and practically no changes