Open Source uClinux System Software

hdparm - get/set ATA/SATA drive parameters under Linux

This project is an implementation of the Precision Time Protocol (PTP) according to IEEE standard 1588 for Linux.

Opensource frimware for platforms based on some SoC (Realtek RTL8186 - Wive-NG, Realtek RTL8671B/RTL8671BH/RTL8672 - Wive-NG-DSL, Ralink RT3050/RT3052 - Wive-NG-RTNL, MT7620/MT7621 - Wive-NG-MT) For detailed discussion of commercial use please mail to info@wi-cat.ru. For more details in russian please go to https://wi-cat.ru Any support for end user only in https://wi-cat.ru/forums/ forum page. Author page: http://wive-ng.sf.net Commercial support support@wi-cat.ru Supported device list: 1) Wive-NG-HQ - latest FW tree (only commercial access) 2) Wive-NG-MT (current) - https://wi-cat.ru/wive-ng/ustroystva-postavlyaemyie-s-os-wive-ng-mt-s-zavoda-2015-2017g/ 3) Wive-NG-RTNL (EOL) - http://wive-ng.sourceforge.net/?WR-NL_RT3050%282%29:Sovmestimye_ustroystva 4) Wive-NG-ADSL (EOL) - http://wive-ng.sourceforge.net/?W422G.v3_8671BH_%284%2F16%29

Small Linux version with MMU less support. uClinux, μClinux and the logos versions are Trademarks of Arcturus Networks Inc. Copyright © 1998 - 2002 D. Jeff Dionne and Michael Durrant Copyright © 2001 - 2018 Arcturus Networks Inc.

A secure, feature-rich, customizable embedded Linux network appliance for use in a variety of network topologies. Although it can be used in other ways; its primarily used as a Internet gateway, router, firewall, and wireless access point. LEAF documentation wiki http://bering-uclibc.zetam.org

O nome do projeto no sourceforge.net era apcupsd-brazil e mudou para apcctrl. Caso seu nobreak não seja da APC Brasil (como os modelos importados) utilize o projeto http://www.apcupsd.org/ Esse projeto não é oficial da APC Brasil. É uma solução independente e de código aberto. Não deixe de ler a wiki do projeto. É fundamental para compilar e ter acesso a outras orientações. Modelos suportados: 1) BACK-UPS BR 1200VA (BZ1200BI-BR e BZ1200-BR) *modelos com USB 2) BACK-UPS BR 1500VA (BZ1500PBI-BR e BZ1500BI-BR) 3) BACK-UPS BR 2200VA (BZ2200BI-BR e BZ2200I-BR) 4) SMART-UPS BR 1000VA (SUA1000BI-BR e SOLIS1000BI) 5) SMART-UPS BR 1500VA (SUA1500BI-BR e SOLIS1500BI) 6) SMART-UPS BR 2000VA (SUA2000BI-BR) 7) SMART-UPS BR 3000VA (SUA3000BI-BR) Para entrar em contato, utilize lo formulário no site http://www.apcctrl.com.br

A Linux port of the OpenBSD/FreeBSD Cryptographic Framework (OCF). This port aims to bring full asynchronous HW/SW crypto acceleration to the Linux kernel, OpenSwan, OpenSSL and applications using DES, 3DES, AES, MD5, SHA, PublicKey, RNGs and more.

Mainly this project aims at easing startup and use of XCSoar (see xcsoar.org) on Kobo Mini. But the scope of use should not be limited solely to XCSoar. The Launcher should be small in code size, reuse most of the original libraries, provide flexible configuration to any application that might be ported to the Kobo Mini. It supports customizable fonts, toolbox-pages, buttons (also graphical), labels, autostart and sleep timers.

Project ZeroSlackr is a custom iPodLinux installation system. The aim of the project is to provide a simple, coherent, easy-to-use and newbie friendly method of installing iPodLinux on iPods and trying out various emulators, apps, tools and and content.

Yet another firmware for the Linksys WAG200.

Q5 is a complete fully open linux based router / network appliance, including hardware. It supports up to four wireless minipci cards and two 10/100 Mbps NICs. The hardware is build around AMD's AU1500 MIPS processor, running at 264 MHz.

AGanNo2's H3C 802.1X client V2.20-0247 using H3C private protocol extension

NgGUI is an open source GUI system wrote by C/C++. It is portable for embedded system which based on Linux/ucLinux or VxWorks or WinCE. It can run on the framebuffer or directFB and SDL. iTerminal is a web browser based on NgGUI.

此处仅提供tar.gz压缩包发布和下载，完整的源代码托管于GitHub.com，请访问： https://github.com/liuqun/njit8021xclient

this project aims at migrating uClinux for bf561 to Visual DSP IDE enviroment.

This tool is used to develop small applications that can run on MIPS-based embedded Linux devices - mainly WLAN routers. It is possible to debug these applications using GDB with the GDB backend provided by this tool.

Software system for FlowScreen Router, with SempGate FPGA firmware and Intel EP80579 based board, it implements a high performance (1.5M pps network traffic) router system with open architecture for 3-rd party network application development.

The software package repository for <a href=http://sourceforge.net/projects/fsos>FsOS</a>, including EP80579 drivers, SempSec drivers, linux kernel patches and a lot of porting applications for FsOS

the goal of this project is to build a stack for Lonworks Protocol and device working on this protocol

Using Philips (NXP) boards LPC2148, LPC2138 and LPC2103 (ARM7 CPU) we are going to attempt to get an RTOS to work on them, such as MicroC/OSII that has a text based input output using HyperTerminal.

A replacement firmware distribution for the 3com 3CRADSL72 a.k.a 3com wireless 11g (distributed by Ya.com) and its identical twin, the SMC7804WBRA, with an ucLinux kernel based system and associated system tools.

This project coordinates the efforts of people to port Linux to the Renesas (formerly Hitachi) SuperH family of processors, including the SH-2, SH-3, and SH-4.

Microstate Accounting is a way to determine exactly where a thread is spending its time. This project provides Linux kernel patches to implement microstate accounting.

Firmware for the Minitar 802.11g Wireless Access Point - MWGAP. This devices runs on the Linux Operating System and this repository will manage the source code for the firmware that runs the device.

Community added next generation firmware extensions to the AMS150 and SBLAN2 NAS devices by FSC, please visit http://forum.fujitsu-siemens.com/digitalhome/viewtopic.php?f=41&t=6997 for details.